any pics of JR's rig out their? - Pirate4x4.Com : 4x4 and Off-Road Forum

rokcrln · 06-16-2003, 06:32 PM

Looking for some ideas on re-doing my EB. Not that it needs work but I am bored with it and have to much money to get rid of it. So I am thinking of going 4 link and coil overs and maybe tube frame with removable body panels for hard wheeling but still want it streetable. Any thoughts on new build ups? Would like to get some pics of JR's rig and others that are tube or linked and coiled. Thanks in advance for the info.

Flatty · 06-16-2003, 07:41 PM

Search, as I am sure you know. They are out there.

Dimitri

rokcrln · 06-16-2003, 07:48 PM

Yah I tryed but came up with not much untill my but reminded me it was a fat city project. That worked, but I am still interested in others ideas.

yellowbronco · 06-18-2003, 04:15 PM

How about this?

I don't know whose it is but I saw it a while back and just had to hang onto the pic.

Tom

rokcrln · 06-18-2003, 04:30 PM

Looks like what I am thinking of do you have some more of that rig? What my thoughts are is to design a tube buggy around my EB so it can have body skins and a softtop for street use and snow runs but remove body for trail use. I have the skill and tools to do all this just want to get more ideas before tearing into a perfectly good EB. If I could sell it and recupe my costs I would just build a buggy but since that won't happen this is the next step.

inphobic · 06-18-2003, 04:41 PM

lee novikoff's, check the lonestar ebc site.

YellowSub1962 · 06-18-2003, 04:49 PM

there's a whole thread of buildup pics of the purple on in Gen4x4....do a search for "Barbie"

rokcrln · 06-18-2003, 04:51 PM

Right on thanks

YellowSub1962 · 06-18-2003, 04:52 PM

for JR's bronco try searching under "fat city" and under "top truck" or "ttt" or any combo of those ....

heres a link with a few pics.... theres lots more all over this site though

http://www.pirate4x4.com/forum/showt...eferrerid=1494

06-16-2003, 06:32 PM	#1 (permalink)
rokcrln Registered User Join Date: Jul 2001 Member # 5821 Location: Lost in my own head! Posts: 1,409	any pics of JR's rig out their? Looking for some ideas on re-doing my EB. Not that it needs work but I am bored with it and have to much money to get rid of it. So I am thinking of going 4 link and coil overs and maybe tube frame with removable body panels for hard wheeling but still want it streetable. Any thoughts on new build ups? Would like to get some pics of JR's rig and others that are tube or linked and coiled. Thanks in advance for the info. __________________ Buildem--Rollem--Tearem Apart--Get Rid of the Wife--And Start All Over! BRONCO BUGGY; dana44,35spln 9", 37's, 351W efi, C5full manual w/comp brk, atlass 5:1, fox 16" air's master craft rubicon's, full hydro, and a girl friend that loves to help.

06-16-2003, 07:41 PM	#2 (permalink)
Flatty Registered User Join Date: Feb 2000 Member # 29 Location: Belmont, CA Posts: 6,390	Search, as I am sure you know. They are out there. Dimitri __________________ 1974 FJ40 in the works 2006 F250 crew cab longbed powerstroke for towing duties

06-16-2003, 07:48 PM	#3 (permalink)
rokcrln Registered User Join Date: Jul 2001 Member # 5821 Location: Lost in my own head! Posts: 1,409	Yah I tryed but came up with not much untill my but reminded me it was a fat city project. That worked, but I am still interested in others ideas. __________________ Buildem--Rollem--Tearem Apart--Get Rid of the Wife--And Start All Over! BRONCO BUGGY; dana44,35spln 9", 37's, 351W efi, C5full manual w/comp brk, atlass 5:1, fox 16" air's master craft rubicon's, full hydro, and a girl friend that loves to help.

06-18-2003, 04:15 PM	#4 (permalink)
yellowbronco Wheeler Join Date: Oct 2002 Member # 14354 Location: Sacramento, CA Posts: 142	How about this? I don't know whose it is but I saw it a while back and just had to hang onto the pic. Tom Attached Images

06-18-2003, 04:30 PM	#5 (permalink)
rokcrln Registered User Join Date: Jul 2001 Member # 5821 Location: Lost in my own head! Posts: 1,409	Looks like what I am thinking of do you have some more of that rig? What my thoughts are is to design a tube buggy around my EB so it can have body skins and a softtop for street use and snow runs but remove body for trail use. I have the skill and tools to do all this just want to get more ideas before tearing into a perfectly good EB. If I could sell it and recupe my costs I would just build a buggy but since that won't happen this is the next step. __________________ Buildem--Rollem--Tearem Apart--Get Rid of the Wife--And Start All Over! BRONCO BUGGY; dana44,35spln 9", 37's, 351W efi, C5full manual w/comp brk, atlass 5:1, fox 16" air's master craft rubicon's, full hydro, and a girl friend that loves to help. Last edited by rokcrln; 06-18-2003 at 04:38 PM.

06-18-2003, 04:41 PM	#6 (permalink)
inphobic Rock God Join Date: Nov 2001 Member # 8422 Location: Kansas City, Kansas Posts: 2,193	lee novikoff's, check the lonestar ebc site. __________________ Jake Good Special Thanks to: COOPER TIRES, Trail Tough, Inland Truck Parts, Kansas Rocks, The Awesome RBR Crew!

06-18-2003, 04:49 PM	#7 (permalink)
YellowSub1962 108" Smurfmobile Join Date: Aug 2000 Member # 1494 Location: The Land Of The Free, Thanks To The Brave! Posts: 8,266	there's a whole thread of buildup pics of the purple on in Gen4x4....do a search for "Barbie" __________________ Peter S. Di Primo PSD Enterprises, LLC - Waterjet, laser, metal forming, CNC work, Fiberglass and Carbon work, patterns and molds. No job too small. Prototyping and small production is our specialty, but we have the network to handle large jobs as well. Email me if you need something cut, bent, formed, milled, machined, etc. Founding Member - VCAS4WDC www.axlesnappers.org Help Fight Global Warming- turn your A/C on high and open all your windows. Alcohol, Tobacco, and Firearms should be a convenience store - NOT a government agency!!!!

06-18-2003, 04:51 PM	#8 (permalink)
rokcrln Registered User Join Date: Jul 2001 Member # 5821 Location: Lost in my own head! Posts: 1,409	Right on thanks __________________ Buildem--Rollem--Tearem Apart--Get Rid of the Wife--And Start All Over! BRONCO BUGGY; dana44,35spln 9", 37's, 351W efi, C5full manual w/comp brk, atlass 5:1, fox 16" air's master craft rubicon's, full hydro, and a girl friend that loves to help.

06-18-2003, 04:52 PM	#9 (permalink)
YellowSub1962 108" Smurfmobile Join Date: Aug 2000 Member # 1494 Location: The Land Of The Free, Thanks To The Brave! Posts: 8,266	for JR's bronco try searching under "fat city" and under "top truck" or "ttt" or any combo of those .... heres a link with a few pics.... theres lots more all over this site though http://www.pirate4x4.com/forum/showt...eferrerid=1494 __________________ Peter S. Di Primo PSD Enterprises, LLC - Waterjet, laser, metal forming, CNC work, Fiberglass and Carbon work, patterns and molds. No job too small. Prototyping and small production is our specialty, but we have the network to handle large jobs as well. Email me if you need something cut, bent, formed, milled, machined, etc. Founding Member - VCAS4WDC www.axlesnappers.org Help Fight Global Warming- turn your A/C on high and open all your windows. Alcohol, Tobacco, and Firearms should be a convenience store - NOT a government agency!!!!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode