351w bellhousing vs 302 bell? - Pirate4x4.Com : 4x4 and Off-Road Forum

YotaBoy · 01-30-2004, 10:15 PM

I was wondering if the 302 bell housing is the same as the 351w. I'm looking for an adapter for my toyota tranny. I'm not sure if the bell housings on the fords are the same so I thought I would ask the ford guys.

Thanks

Neil.

D-diesel · 01-30-2004, 10:41 PM

302 and 351w share the same pattern. what kind of tranny you running?

Jrod-13 · 01-30-2004, 11:55 PM

255,289,300,302,351W, and 351C all share the same bellhousing.

infoford · 01-31-2004, 04:15 PM

Same

NOODLES · 01-31-2004, 06:06 PM

Quote:

Originally posted by Jrod-13
255,289,300,302,351W, and 351C all share the same bellhousing.

please note, early 289 from cars(mustangs,rancheros, and falcons) have a 5 bolt bellhousing, while the newer ones have 6 bolts.

ImNotRight · 01-31-2004, 08:48 PM

well then on the same note, there are also some 351M's with the SB pattern

the 5 bolt pattern is old.. very, very old..

Jrod-13 · 01-31-2004, 08:55 PM

Quote:

Originally posted by NOODLES

please note, early 289 from cars(mustangs,rancheros, and falcons) have a 5 bolt bellhousing, while the newer ones have 6 bolts.

Yes, I believe it was pre 66' and only on toploaders and cruise-o-matics.

Quote:

Originally posted by ImNotRight
well then on the same note, there are also some 351M's with the SB pattern

the 5 bolt pattern is old.. very, very old..

I'm pretty sure there was no 351M with the SBF pattern, but there was a 74' 400 with the SBF pattern, backed by a FMX.

YotaBoy · 02-02-2004, 05:46 AM

thanks for all the insite. D-Diesel, I'm running a stock 4cyl. tranny. The combo will be too much out put for the tranny but I have never been a goose'r or a heavy right foot. so the tranny should last for a bit. but I'll deal with that road when I cross it.

Thanks again.

Neil

demonranger · 02-02-2004, 12:05 PM

bolt pattern to the block is the same however there are some variations as to the diameter of the hole for the input shaft coming from the transmission for ford apps I have not found a situation that it matters. AA makes a point for the NV4500 swap you must have the larger bore.

01-30-2004, 10:15 PM	#1 (permalink)
YotaBoy Registered User Join Date: Feb 2000 Member # 194 Location: The WOOD,WA.,USA Posts: 200	351w bellhousing vs 302 bell? I was wondering if the 302 bell housing is the same as the 351w. I'm looking for an adapter for my toyota tranny. I'm not sure if the bell housings on the fords are the same so I thought I would ask the ford guys. Thanks Neil. __________________ "Education is a series of prejudices acquired by the age of eighteen." Albert Einstein

01-30-2004, 11:55 PM	#3 (permalink)
Jrod-13 Registered User Join Date: Feb 2003 Member # 17313 Location: Tower, MN Posts: 2,794	255,289,300,302,351W, and 351C all share the same bellhousing. __________________ A recent survay of over 1000 trailer parks in the southeast found the 350 chevy out numbered the mullet by nearly 4:1, draw your own conclusion.

01-31-2004, 04:15 PM	#4 (permalink)
infoford Registered User Join Date: Oct 2002 Member # 14168 Location: Montana Posts: 299	Same __________________ Trent NORTH COUNTRY SPECIALTIES www.ncspecialties.com home of the picador & Dually 1979 Ford CC 4X4

01-31-2004, 08:48 PM	#6 (permalink)
ImNotRight Registered User Join Date: May 2003 Member # 19666 Location: Napa, CA transplant. Posts: 1,207	well then on the same note, there are also some 351M's with the SB pattern the 5 bolt pattern is old.. very, very old.. __________________ QUOTE=TheHawes;15027873 If it wasn't for pussy, I'd hunt them fucking things.

02-02-2004, 05:46 AM	#8 (permalink)
YotaBoy Registered User Join Date: Feb 2000 Member # 194 Location: The WOOD,WA.,USA Posts: 200	thanks for all the insite. D-Diesel, I'm running a stock 4cyl. tranny. The combo will be too much out put for the tranny but I have never been a goose'r or a heavy right foot. so the tranny should last for a bit. but I'll deal with that road when I cross it. Thanks again. Neil __________________ "Education is a series of prejudices acquired by the age of eighteen." Albert Einstein

01-30-2004, 10:41 PM	#2 (permalink)
D-diesel Registered User Join Date: Aug 2003 Member # 22185 Location: Back in the PNW!! Posts: 202	302 and 351w share the same pattern. what kind of tranny you running?

02-02-2004, 12:05 PM	#9 (permalink)
demonranger Rock God Join Date: Mar 2003 Member # 18283 Location: Florida Posts: 1,285	bolt pattern to the block is the same however there are some variations as to the diameter of the hole for the input shaft coming from the transmission for ford apps I have not found a situation that it matters. AA makes a point for the NV4500 swap you must have the larger bore. __________________ There are no rules. You have to think!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode