Whats a rear d60 worth - Pirate4x4.Com : 4x4 and Off-Road Forum

Tonka_sam · 09-12-2001, 08:12 PM

Whats a rear d60 from a full size worth?

How hard is it to put full size axels under my eb D44hp upfront and d60 rear

Gordon · 09-13-2001, 11:14 AM

rear dana 60 depends on condition/spline count etc $50 to $200 in my opinion.

the hardest thing about that swap is moving the C bushing mounts on the axle. Many of the high pinion frontends had the c bushing mounts cast into the outer section of tube. These can not be moved practically. the welded on C bushing mounts are a project to grind off. Supposedly Duff sells new ones that you can just weld on. Other than that steering trackbar springpad and brake lines need to be modified.

09-12-2001, 08:12 PM	#1 (permalink)
Tonka_sam Registered User Join Date: May 2000 Member # 883 Location: ashland, OR Posts: 392	Whats a rear d60 worth Whats a rear d60 from a full size worth? How hard is it to put full size axels under my eb D44hp upfront and d60 rear __________________ What we are all really seeking... is an experience where we can feel the rapture of being alive..

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

09-13-2001, 11:14 AM	#2 (permalink)
Gordon Registered User Join Date: May 2000 Member # 929 Location: Santa Rosa, Ca USA Posts: 2,825	rear dana 60 depends on condition/spline count etc $50 to $200 in my opinion. the hardest thing about that swap is moving the C bushing mounts on the axle. Many of the high pinion frontends had the c bushing mounts cast into the outer section of tube. These can not be moved practically. the welded on C bushing mounts are a project to grind off. Supposedly Duff sells new ones that you can just weld on. Other than that steering trackbar springpad and brake lines need to be modified.