Pirate 4x4 banner

couple Q's on c6 and BW tcase

546 views 4 replies 3 participants last post by  ford_n_toy 
#1 ·
so i pick up a c6 and bw tcase out of a 87 ford bronco... i am puting them behind my 351w, i was running a np435 and D20 before. so i know that i need a flywheel and TQ converter.


on to the questions:

1. the t case is electric shift, can i convert it to manual?
2. if answer to number 1 is NO, then how dependible is the electric shift and how do i wire it up?
3. does the TQ converter and flywheel have to be off a motor with a c6 or will any auto flywheel and TQ converter work.
4. if the shift on the fly case is trash what other case's will bolt up to it?

thanks ahead of time for the help guys....:D
 
#3 ·
dont have any drive shafts yet so thats not a problem, at my local jy there are alot of ford trucks with autos, but none with c6's so will any manual shift tcase bolted to a auto bolt to my c6? or will i need a new tail shaft off a c6 for that case. any tcase that i should look for? or stay away from?
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top