Looking for a yoke - Pirate4x4.Com : 4x4 and Off-Road Forum

djmac · 04-15-2008, 03:30 PM

I need to have a high angle driveline built which wouldn't be a big deal but it turns out that my B/W 1345 transfer case is an issue. The existing front yoke is supposedly somewhat rare and the only way I can get the driveline built is to come up with 32 spline CV style yoke that was available for the 1345 Tcase. I am told it was in the 4 wdrive 88 F250 and no doubt in many other years but right now I am only sure of that year. So how about it? Anyone have a source or a better idea?

Nor Cal Wheelin · 04-15-2008, 03:42 PM

PM'D

***EDIT just saw your location... Think it over and let me know.

djmac · 04-15-2008, 08:55 PM

Quote:

Originally Posted by Nor Cal Wheelin

PM'D

***EDIT just saw your location... Think it over and let me know.

PM'd ya back

FordtruckJohn · 04-16-2008, 12:56 PM

here is a good source for hard to get parts like that. Border Parts in San Diego california. phone is 619-461-0171. they are located in Spring Valley on Bancroft.

djmac · 04-16-2008, 05:18 PM

Quote:

Originally Posted by FordtruckJohn

here is a good source for hard to get parts like that. Border Parts in San Diego california. phone is 619-461-0171. they are located in Spring Valley on Bancroft.

Thanks, I called them but they did not have one but referred me to another source. The hunt goes on. I went thru a pic and pull here and came up empty. Plenty of the smaller shaft sizes but no 32 spline.

onetoncv · 05-08-2008, 07:27 PM

It is a rare part -Jess

82F100SWB · 05-08-2008, 07:33 PM

That Yoke would be an F350 only part, 85.5-87 with the 1345, only the D60 trucks got the dual cardan shaft up front stock.
Is there any reason a 1356 yoke from an 87-97 truck wouldn't fit?

djmac · 05-10-2008, 05:14 AM

Quote:

Originally Posted by 82F100SWB

That Yoke would be an F350 only part, 85.5-87 with the 1345, only the D60 trucks got the dual cardan shaft up front stock.
Is there any reason a 1356 yoke from an 87-97 truck wouldn't fit?

Well I lucked out and the guys at Unlimited 4x4 found me a new yoke that worked. Thanks for everyones ideas and input.

04-15-2008, 03:30 PM	#1 (permalink)
djmac Registered User Join Date: Oct 2004 Member # 36387 Posts: 16	Looking for a yoke I need to have a high angle driveline built which wouldn't be a big deal but it turns out that my B/W 1345 transfer case is an issue. The existing front yoke is supposedly somewhat rare and the only way I can get the driveline built is to come up with 32 spline CV style yoke that was available for the 1345 Tcase. I am told it was in the 4 wdrive 88 F250 and no doubt in many other years but right now I am only sure of that year. So how about it? Anyone have a source or a better idea? __________________ 82 J10 SOA 6" SPRINGS D60-D70 W/DET LOCKERS 38x15.5 TSL'S 460 V8 C-6 Custom EFIS EFI

04-15-2008, 03:42 PM	#2 (permalink)
Nor Cal Wheelin Banned Join Date: Oct 2004 Member # 36711 Location: Elk Horn, North Salinas Posts: 1,430	PM'D **EDIT just saw your location... Think it over and let me know. Last edited by Nor Cal Wheelin; 04-15-2008 at 03:43 PM.*

05-08-2008, 07:27 PM	#6 (permalink)
onetoncv Pirate4x4 Addict! Join Date: Nov 2000 Member # 2160 Location: Paradise , ca Posts: 9,509	It is a rare part -Jess __________________ http://highangledriveline.com Bringing Innovation to the market ! http://highangledriveline.com/HAD1.gif 530-877-2875 --------------------------------------------------------------------------------

05-08-2008, 07:33 PM	#7 (permalink)
82F100SWB Fawkin Fordhead Join Date: Nov 2002 Member # 15263 Location: Winterpeg, Canada Posts: 2,048	That Yoke would be an F350 only part, 85.5-87 with the 1345, only the D60 trucks got the dual cardan shaft up front stock. Is there any reason a 1356 yoke from an 87-97 truck wouldn't fit? __________________ 96 F350 XL CC PSD/5 speed 4x4... New Tow pig in the making 96 F250 XLT Ex Cab PSD/5 speed 4x4... DD/Tow Pig 92 W250 LE, CTD/5 speed 4x4, tow pig/DD/snow pushin pig 86 F250... 460/T19/1345/D60/welded 10.25, 44 Boggers, reg cab, some junk... Build

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

04-16-2008, 12:56 PM	#4 (permalink)
FordtruckJohn Registered User Join Date: Mar 2008 Member # 111709 Posts: 11	here is a good source for hard to get parts like that. Border Parts in San Diego california. phone is 619-461-0171. they are located in Spring Valley on Bancroft.