High Steer for EB - Pirate4x4.Com : 4x4 and Off-Road Forum

jeffhawkins · 02-25-2010, 06:30 PM

I have searched, will chevy flat nuckle fit with a chevy outer shaft for high steer?

geneus · 02-25-2010, 07:06 PM

Im guessing you mean ford flat knuckle with a chevy outer shaft.

I tried put ford knuckle on chevy 10bolt front once and it didn't work i cant remenber why though i think it was different ball joints.

But maby on d44 it will work.

jeffhawkins · 02-25-2010, 07:23 PM

no I mean chevy dana 44 nuckle because the ford nuckle does not have enough metal to be milled down unless somebody knows something else that would help me. thanks

Bronco Brian · 02-25-2010, 07:33 PM

You got to watch the tie rod hitting the upper track bar mount. Even with TRO if you have a lowering mount on the driver side. So with true High Steer it will be close.

geneus · 02-25-2010, 07:53 PM

O see i was all confused i was thinking putting ford on chevy you putting chevy on ford

jeffhawkins · 02-26-2010, 05:08 PM

I found my answer on here. before I got flamed

chevy 44 flattop outer knuckle chevy spindle caliper mount & caliper ford eb hub & roter:

02-25-2010, 06:30 PM	#1 (permalink)
jeffhawkins Registered User Join Date: Nov 2005 Member # 56960 Posts: 33	High Steer for EB I have searched, will chevy flat nuckle fit with a chevy outer shaft for high steer?

02-25-2010, 07:06 PM	#2 (permalink)
geneus Registered User Join Date: Dec 2004 Member # 40228 Location: Helena Montana Posts: 50	Im guessing you mean ford flat knuckle with a chevy outer shaft. I tried put ford knuckle on chevy 10bolt front once and it didn't work i cant remenber why though i think it was different ball joints. But maby on d44 it will work. __________________ 1979 F250 5.8l FI, NP235, NP205 Dana 60 Front,Rear 39.5 iroks

02-25-2010, 07:53 PM	#5 (permalink)
geneus Registered User Join Date: Dec 2004 Member # 40228 Location: Helena Montana Posts: 50	O see i was all confused i was thinking putting ford on chevy you putting chevy on ford __________________ 1979 F250 5.8l FI, NP235, NP205 Dana 60 Front,Rear 39.5 iroks

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-25-2010, 07:23 PM	#3 (permalink)
jeffhawkins Registered User Join Date: Nov 2005 Member # 56960 Posts: 33	no I mean chevy dana 44 nuckle because the ford nuckle does not have enough metal to be milled down unless somebody knows something else that would help me. thanks

02-25-2010, 07:33 PM	#4 (permalink)
Bronco Brian Registered User Join Date: Nov 2006 Member # 83112 Location: Ukiah Posts: 160	You got to watch the tie rod hitting the upper track bar mount. Even with TRO if you have a lowering mount on the driver side. So with true High Steer it will be close.

02-26-2010, 05:08 PM	#6 (permalink)
jeffhawkins Registered User Join Date: Nov 2005 Member # 56960 Posts: 33	I found my answer on here. before I got flamed chevy 44 flattop outer knuckle chevy spindle caliper mount & caliper ford eb hub & roter: