Pirate 4x4 banner

Ford D44 hub/rotor assy. question

944 views 3 replies 3 participants last post by  71PA_Highboy 
#1 · (Edited)
Long story short, I got an EB D44 and one of the hubs is shot. I noticed the rotor had some play while doing other work on my truck so I got the lockout hub off and noticed some metal chunks.

Got the bearings and races out and they were fine but when I took out the outer race it was loose, like rattle around loose. As far as I can tell the race chewed away the surrounding metal it sits in.

So I had to suck it up and go buy a new rotor/hub assy...so I thought. Went to AutoZone and Pep Boys and they carry just the rotors minus the hub. They guy at Pep Boys said the hubs are an obsolete part from Ford and go try a salvage yard. There's gotta be a parts house that carries the whole deal...NAPA perhaps?

I can get one from Wild Horses or any number of online sources but I just wanted to go pick one up and be done with it:shaking:
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top