looking for 3 to 1 for 205 or bolt up case - Pirate4x4.Com : 4x4 and Off-Road Forum

stiller motorsports · 11-29-2010, 07:32 PM

have a buggy with 460fi,c6 and 205 case. is there any lower case that will bolt up. 205 has like 200-1 and looking for 300-1 for low range. other cases come to mind. rev 60 drivers side droop.

Ditchrunner · 11-29-2010, 07:42 PM

I think the LoMax gears are available for the 205.
Or you can do a 1356 fixed yoke with 2.69:1 ratio.

seemoremud · 11-29-2010, 08:17 PM

Last I checked LoMax wasn't available for the Ford cases, and they weren't planning to make it available any time soon

f250rollinon37s · 11-29-2010, 08:27 PM

check out summer machine he makes 3.1 for the ford 205, otherwise id get a klune or black box underdrive - they have a 2.72 low it will give more options and they are both around 7" long

Danger Ranger · 11-29-2010, 09:08 PM

Quote:

Originally Posted by f250rollinon37s

check out summer machine he makes 3.1 for the ford 205, otherwise id get a klune or black box underdrive - they have a 2.72 low it will give more options and they are both around 7" long

SumNer maybe? I found a sumner machine, checked the website, 4x4 stuff but no 3to1 ford 205 mentioned. Figure a place would advertize something like that, especially if they are the only ones making it?

bw 1345 and bw 1356 tcases found in all kinds of 80's on up ford 4x4's will bolt up, 2.72:1 but they are chain driven tcases

Jrod-13 · 11-29-2010, 09:22 PM

put a 1356 between the c-6 and 205, easy as pie..

stiller motorsports · 11-30-2010, 05:55 AM

Don't have room for a doubler, have to stick to just 1. i was hoping for a 205 with a 300-1 or different case.

Offroad_Addiction · 11-30-2010, 07:38 AM

Quote:

Originally Posted by Jrod-13

put a 1356 between the c-6 and 205, easy as pie..

Explain, I haven't heard about anyone using the 1356 for a doubler.

CherokeefromMI · 11-30-2010, 08:20 AM

Quote:

Originally Posted by Danger Ranger

SumNer maybe? I found a sumner machine, checked the website, 4x4 stuff but no 3to1 ford 205 mentioned. Figure a place would advertize something like that, especially if they are the only ones making it?

bw 1345 and bw 1356 tcases found in all kinds of 80's on up ford 4x4's will bolt up, 2.72:1 but they are chain driven tcases

Chain drive or not, the 1356 cases are VERY stout. I'd just swap in a 1356 from a Bronco (flange mount-no slip yoke)

Danger Ranger · 11-30-2010, 08:54 AM

Quote:

Originally Posted by CherokeefromMI

Chain drive or not, the 1356 cases are VERY stout. I'd just swap in a 1356 from a Bronco (flange mount-no slip yoke)

Can't twin stick a chain driven case

Blown349 · 11-30-2010, 11:56 AM

Just sell a kidney and get an Atlas!

f250rollinon37s · 11-30-2010, 06:59 PM

sorry john summer - formerly of wagoner machine shop ( WMS - out o bussiness ) now runs summer machine works http://sumnermachine.com/sumner_products.html

he made a 3.1 for ford 203 and a few ford 205s if i remember. long before there was a lomax

Jrod-13 · 11-30-2010, 07:22 PM

Quote:

Originally Posted by Offroad_Addiction

Explain, I haven't heard about anyone using the 1356 for a doubler.

search on here, there is a thread i put some pics up in, as well as a few others

cyclegrip · 11-30-2010, 07:29 PM

Quote:

Originally Posted by Danger Ranger

SumNer maybe? I found a sumner machine, checked the website, 4x4 stuff but no 3to1 ford 205 mentioned. Figure a place would advertize something like that, especially if they are the only ones making it?

bw 1345 and bw 1356 tcases found in all kinds of 80's on up ford 4x4's will bolt up, 2.72:1 but they are chain driven tcases

What about a 90's bw 1356 with the slip yoke?

stiller motorsports · 12-03-2010, 09:24 PM

if i go to a atlas, does anyone know what spline count i need for a c6 tranny. thanks

f250rollinon37s · 12-03-2010, 10:48 PM

31

Danger Ranger · 12-04-2010, 09:21 PM

Quote:

Originally Posted by f250rollinon37s

check out summer machine he makes 3.1 for the ford 205

I contacted them... said they did make that gear set at one time, but don't anymore.

f250rollinon37s · 12-04-2010, 09:28 PM

well fucksticks - it used to be a few hundred cheaper than a klune, and possibly stronger. that was my plan back in the day - well when i started my project

BigHarvey56 · 12-04-2010, 09:41 PM

yup 31 spline on the out put, i heard at one time there was a company that made a 3 to 1 for a 203 box and i wish someone would make a 3 to 1 for the 205. that might be cool to have a double with 3 to 1 in a 203 and 3 to 1 in your 205

dahoyle · 12-05-2010, 10:59 AM

Quote:

Originally Posted by BigHarvey56

yup 31 spline on the out put, i heard at one time there was a company that made a 3 to 1 for a 203 box and i wish someone would make a 3 to 1 for the 205. that might be cool to have a double with 3 to 1 in a 203 and 3 to 1 in your 205

You're an idiot. Someone does make a 3:1 for the 205, as was mentioned a few posts up. They just don't make one for a Ford case.

Ascinder · 12-05-2010, 11:30 AM

Quote:

You're an idiot. Someone does make a 3:1 for the 205, as was mentioned a few posts up. They just don't make one for a Ford case.

You're posting in a ford forum-what the fuck did you think they were talking about?

dahoyle · 12-05-2010, 11:38 AM

Quote:

Originally Posted by Ascinder

You're posting in a ford forum-what the fuck did you think they were talking about?

A 205. That's what he said he was talking about. Yeah, just went back and re read it. Pretty sure he was talking about a 205. Go the fuck away. It isn't polite for children to speak until spoken to.

Danger Ranger · 12-05-2010, 05:24 PM

Yeah flaming is fun when people are stupid and I know things are getting pretty dumb around here lately. But from post #1 we've been talking about ford transfercases and powertrain. So what does name calling and stating someone makes a 3:1 for a chevy 205 bring to the thread other than derail it and turn it into a bitch fest.

BigHarvey56 · 02-01-2011, 09:41 AM

Quote:

Originally Posted by BigHarvey56

yup 31 spline on the out put, i heard at one time there was a company that made a 3 to 1 for a 203 box and i wish someone would make a 3 to 1 for the 205. that might be cool to have a double with 3 to 1 in a 203 and 3 to 1 in your 205

Quote:

Originally Posted by dahoyle

You're an idiot. Someone does make a 3:1 for the 205, as was mentioned a few posts up. They just don't make one for a Ford case.

Quote:

Originally Posted by Ascinder

You're posting in a ford forum-what the fuck did you think they were talking about?

Quote:

Originally Posted by dahoyle

A 205. That's what he said he was talking about. Yeah, just went back and re read it. Pretty sure he was talking about a 205. Go the fuck away. It isn't polite for children to speak until spoken to.

sometimes i have dump moments but i knew what i was talking about and i know that there is a low max kit for the dodge and chevy pass side drop that is the 3to1, ive looked into it, they send you a whole new case and gears to go inside and u reuse a few parts and i would like to see a 3to1 for a ford 205 case. i sure am glad that someone else relized what i was talking about. i love my doubler.

obxboarder · 02-01-2011, 05:30 PM

might want to look into a nv 271 from the newer super duty strong light and get this its got a 271 to 1 ratio

11-29-2010, 07:32 PM	#1 (permalink)
stiller motorsports Newbie Join Date: Nov 2010 Member # 175117 Location: kittanning pa Posts: 71	looking for 3 to 1 for 205 or bolt up case have a buggy with 460fi,c6 and 205 case. is there any lower case that will bolt up. 205 has like 200-1 and looking for 300-1 for low range. other cases come to mind. rev 60 drivers side droop.

11-29-2010, 08:17 PM	#3 (permalink)
seemoremud Registered User Join Date: Nov 2005 Member # 58978 Location: Alabama Posts: 17	Last I checked LoMax wasn't available for the Ford cases, and they weren't planning to make it available any time soon __________________ '91 F-150,ext cab, no bed, shortened WB , 5.13s, D60s locked f&r, leaks a lot

11-29-2010, 08:27 PM	#4 (permalink)
f250rollinon37s MASTER TECH Join Date: Oct 2005 Member # 54844 Location: Northern cali Posts: 3,435	check out summer machine he makes 3.1 for the ford 205, otherwise id get a klune or black box underdrive - they have a 2.72 low it will give more options and they are both around 7" long __________________ BSW Racing, Calrocs Super mods 12 & ? Driver: Aaron Whitehead - Driver: Joe Hutchins Spotter: Adam Kovarik - Spotter: Dustin Knight Crew Cheif: me fuckers build up of the truggy /forum/ford/544813-update-pics.html

11-29-2010, 09:22 PM	#6 (permalink)
Jrod-13 Registered User Join Date: Feb 2003 Member # 17313 Location: Tower, MN Posts: 2,794	put a 1356 between the c-6 and 205, easy as pie.. __________________ A recent survay of over 1000 trailer parks in the southeast found the 350 chevy out numbered the mullet by nearly 4:1, draw your own conclusion.

11-30-2010, 11:56 AM	#11 (permalink)
Blown349 Registered User Join Date: Jan 2007 Member # 85036 Location: Littletown Crawlorado Posts: 656	Just sell a kidney and get an Atlas! __________________ Da "Carcass" Built by Swat. [url]http://www.supermotors.net/vehicles/registry/3612[/url]

11-29-2010, 07:42 PM	#2 (permalink)
Ditchrunner Registered User Join Date: Aug 2004 Member # 34517 Location: Mt Posts: 353	I think the LoMax gears are available for the 205. Or you can do a 1356 fixed yoke with 2.69:1 ratio.

11-30-2010, 05:55 AM	#7 (permalink)
stiller motorsports Newbie Join Date: Nov 2010 Member # 175117 Location: kittanning pa Posts: 71	Don't have room for a doubler, have to stick to just 1. i was hoping for a 205 with a 300-1 or different case.

11-30-2010, 06:59 PM	#12 (permalink)
f250rollinon37s MASTER TECH Join Date: Oct 2005 Member # 54844 Location: Northern cali Posts: 3,435	sorry john summer - formerly of wagoner machine shop ( WMS - out o bussiness ) now runs summer machine works http://sumnermachine.com/sumner_products.html he made a 3.1 for ford 203 and a few ford 205s if i remember. long before there was a lomax __________________ BSW Racing, Calrocs Super mods 12 & ? Driver: Aaron Whitehead - Driver: Joe Hutchins Spotter: Adam Kovarik - Spotter: Dustin Knight Crew Cheif: me fuckers build up of the truggy http://www.pirate4x4.com/forum/showthread.php?t=544813

12-03-2010, 09:24 PM	#15 (permalink)
stiller motorsports Newbie Join Date: Nov 2010 Member # 175117 Location: kittanning pa Posts: 71	if i go to a atlas, does anyone know what spline count i need for a c6 tranny. thanks

12-03-2010, 10:48 PM	#16 (permalink)
f250rollinon37s MASTER TECH Join Date: Oct 2005 Member # 54844 Location: Northern cali Posts: 3,435	31 __________________ BSW Racing, Calrocs Super mods 12 & ? Driver: Aaron Whitehead - Driver: Joe Hutchins Spotter: Adam Kovarik - Spotter: Dustin Knight Crew Cheif: me fuckers build up of the truggy http://www.pirate4x4.com/forum/showthread.php?t=544813

12-04-2010, 09:28 PM	#18 (permalink)
f250rollinon37s MASTER TECH Join Date: Oct 2005 Member # 54844 Location: Northern cali Posts: 3,435	well fucksticks - it used to be a few hundred cheaper than a klune, and possibly stronger. that was my plan back in the day - well when i started my project __________________ BSW Racing, Calrocs Super mods 12 & ? Driver: Aaron Whitehead - Driver: Joe Hutchins Spotter: Adam Kovarik - Spotter: Dustin Knight Crew Cheif: me fuckers build up of the truggy http://www.pirate4x4.com/forum/showthread.php?t=544813

12-04-2010, 09:41 PM	#19 (permalink)
BigHarvey56 Registered User Join Date: Sep 2009 Member # 141716 Location: Potter Valley, CA Posts: 326	yup 31 spline on the out put, i heard at one time there was a company that made a 3 to 1 for a 203 box and i wish someone would make a 3 to 1 for the 205. that might be cool to have a double with 3 to 1 in a 203 and 3 to 1 in your 205 __________________ if you can't drive over it DRIVE THROUGH IT!!!

12-05-2010, 05:24 PM	#23 (permalink)
Danger Ranger Driven by hate Join Date: Jul 2000 Member # 1234 Location: Clearlake, Ca Posts: 5,398 Blog Entries: 1	Yeah flaming is fun when people are stupid and I know things are getting pretty dumb around here lately. But from post #1 we've been talking about ford transfercases and powertrain. So what does name calling and stating someone makes a 3:1 for a chevy 205 bring to the thread other than derail it and turn it into a bitch fest. __________________ You can check-out any time you like, But you can never leave!

02-01-2011, 05:30 PM	#25 (permalink)
obxboarder Registered User Join Date: Jan 2010 Member # 152392 Posts: 38	might want to look into a nv 271 from the newer super duty strong light and get this its got a 271 to 1 ratio

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode