What do you guys think of... - Pirate4x4.Com : 4x4 and Off-Road Forum

Amanda G · 11-13-2002, 01:14 PM

Stainless steel door panels on EBs?? I bid on some...thought they looked pretty cool and will match my stainless steel hinge pins (I have yet to put those in!!)

Anybody done the quick release hing swap before that can give me pointers??

A

Rerard · 11-13-2002, 02:33 PM

*BLING* *BLING*

welndmn · 11-13-2002, 02:42 PM

http://www.broncohio.com/tech/hingepins.html

and

http://classicbroncos.com/doorhinges.shtml

Amanda G · 11-13-2002, 03:42 PM

Hey Kjell....They weren't as *bling* as the diamondplate ones.

Mark, as always, your tech knowledge astounds me.

Thanks, and where the *heck* is my LOVE EWE!!!

synds9 · 11-13-2002, 07:02 PM

holy shit.. that's alot of money for those door hinges.. isn't it like almost 400? what about those door panels? shit i could have put that money to use myself eh

Amanda G · 11-14-2002, 01:23 PM

Quote:

Originally posted by sandkimo
holy shit.. that's alot of money for those door hinges.. isn't it like almost 400? what about those door panels? shit i could have put that money to use myself eh

I didn't buy the SS hinges, just the pins. I'll re-work the hinges tho.
The door panels?? With 5 days left they are at 36 for the pair. Not too shabby eh?

jopes · 11-14-2002, 01:42 PM

Quote:

Originally posted by Country Girl

Mark, as always, your tech knowledge astounds me.
Thanks, and where the *heck* is my LOVE EWE!!!

Great now his head is going to swell even bigger than before. And I am not talking the one you chase the goats with!

welndmn · 11-14-2002, 01:56 PM

Quote:

Originally posted by jopes

Great now his head is going to swell even bigger than before. And I am not talking the one you chase the goats with!

Can't get any bigger then it already is

I Rule!

Amanda G · 11-14-2002, 02:42 PM

Quote:

Originally posted by welndmn

Can't get any bigger then it already is I Rule!

Yah, so big you didn't catch the sarcasm!!

Had your manboobs molested lately?

jopes · 11-14-2002, 03:05 PM

Quote:

Originally posted by Country Girl

Had your manboobs molested lately?

*Eiw* They are getting really saggy in his age, wear some support man!

smurfsdad · 11-14-2002, 07:56 PM

Just do like i did and take the top and doors to the dump and you wont need all that fancy stainless stuff.

synds9 · 11-15-2002, 01:06 PM

36 for the pair? not bad at all! puts my black plastic pleated panels to shame

!!

Amanda G · 11-15-2002, 01:39 PM

Quote:

Originally posted by sandkimo
36 for the pair? not bad at all! puts my black plastic pleated panels to shame !!

Damn that madgyver!! He is out bidding me...up to 58 bucks now!!
Guess I'll just have to take Nicks advice and run doorless.

HNRYS69 · 11-15-2002, 05:28 PM

make your own... cut it out of thin wood and cover with tweed or material of your choice...

MikeW · 11-15-2002, 06:51 PM

You surely do know how to dress up your EB

masterbeavis · 11-17-2002, 09:26 PM

why not buy a small piece of stainless (say 18-20 ga. or so) and cut your own door panels?? Material will cost you less than $50.

LeviGarrett76 · 11-17-2002, 10:21 PM

thats a good idea

FULLSIZE · 11-17-2002, 11:39 PM

Quote:

and run doorless.

and dont forget topless

Amanda G · 11-18-2002, 12:08 PM

Quote:

Originally posted by FULLSIZE

and dont forget topless

Plannin on it Brian.

And Tony, yah, I could do that, but I'm lazy.

masterbeavis · 11-19-2002, 12:51 PM

Quote:

Originally posted by Country Girl

And Tony, yah, I could do that, but I'm lazy.

Uhmm, we knew that already!!

But seriously, if you could find some metal shears that will cut stainless (try out some stuff that your step dad has) then you are set. All you need to do is take off the door panel on the drivers side and use it as a template, turn it over to get the other side.

my .02 cents

Amanda G · 11-19-2002, 01:33 PM

Quote:

Originally posted by masterbeavis

Uhmm, we knew that already!!

But seriously, if you could find some metal shears that will cut stainless (try out some stuff that your step dad has) then you are set. All you need to do is take off the door panel on the drivers side and use it as a template, turn it over to get the other side.

my .02 cents

Yah, that would help if I HAD ONE on the drivers side!!!
I'm still winning them, altho, they are up to $51.09.

masterbeavis · 11-22-2002, 08:59 PM

Quote:

Originally posted by Country Girl

Yah, that would help if I HAD ONE on the drivers side!!!
I'm still winning them, altho, they are up to $51.09.

Ok, so I am beating up a dead thread, BUT

you know what I mean!!

Too bad it doesnt matter now huh?

11-13-2002, 01:14 PM	#1 (permalink)
Amanda G Registered User Join Date: Jul 2001 Member # 5663 Location: NORCAL Posts: 7,165	What do you guys think of... Stainless steel door panels on EBs?? I bid on some...thought they looked pretty cool and will match my stainless steel hinge pins (I have yet to put those in!!) Anybody done the quick release hing swap before that can give me pointers?? A __________________ TWSS

11-13-2002, 02:42 PM	#3 (permalink)
welndmn Well Done Man! Join Date: Mar 2000 Member # 398 Location: Bay Area, CA Posts: 17,434 Blog Entries: 3	http://www.broncohio.com/tech/hingepins.html and http://classicbroncos.com/doorhinges.shtml __________________ Mark 71 Bronco. 42's and bolt on goats. 47' CJ2a, 302, C4, 33's. 2012, year of the flat fender.

11-13-2002, 03:42 PM	#4 (permalink)
Amanda G Registered User Join Date: Jul 2001 Member # 5663 Location: NORCAL Posts: 7,165	Hey Kjell....They weren't as bling as the diamondplate ones. Mark, as always, your tech knowledge astounds me. Thanks, and where the heck is my LOVE EWE!!! __________________ TWSS

11-13-2002, 07:02 PM	#5 (permalink)
synds9 Registered User Join Date: Mar 2002 Member # 10360 Location: San Diego, CA Posts: 633	holy shit.. that's alot of money for those door hinges.. isn't it like almost 400? what about those door panels? shit i could have put that money to use myself eh __________________ i love my truck, but i'm obsessed with clubbing... you know, like baby seals and stuff.

11-14-2002, 07:56 PM	#11 (permalink)
smurfsdad Registered User Join Date: Mar 2000 Member # 324 Location: Nevada Posts: 4,005	Just do like i did and take the top and doors to the dump and you wont need all that fancy stainless stuff. __________________ Family, Friends, riders and racers, its who we are.

11-13-2002, 02:33 PM	#2 (permalink)
Rerard Registered User Join Date: Jul 2001 Member # 5869 Location: San Jose, CA Posts: 4,490	BLING BLING

11-15-2002, 01:06 PM	#12 (permalink)
synds9 Registered User Join Date: Mar 2002 Member # 10360 Location: San Diego, CA Posts: 633	36 for the pair? not bad at all! puts my black plastic pleated panels to shame !! __________________ i love my truck, but i'm obsessed with clubbing... you know, like baby seals and stuff.

11-15-2002, 05:28 PM	#14 (permalink)
HNRYS69 Registered User Join Date: Sep 2002 Member # 13898 Location: Reno, NV Posts: 639	make your own... cut it out of thin wood and cover with tweed or material of your choice... __________________ - Andy Henry 69 bronco, built 302, C4, BC-3.5in lift, sawzall body lift, 37" MTR's, PTO winch [url=http://hnrys69.classicbroncos.com/]Click to visit my webpage!![/url]

11-15-2002, 06:51 PM	#15 (permalink)
MikeW Registered User Join Date: May 2002 Member # 11975 Location: Bemidji Posts: 2,230	You surely do know how to dress up your EB

11-17-2002, 09:26 PM	#16 (permalink)
masterbeavis Registered User Join Date: Jan 2002 Member # 9468 Location: Eldorado BFE, East of sac Posts: 2,827	why not buy a small piece of stainless (say 18-20 ga. or so) and cut your own door panels?? Material will cost you less than $50.

11-17-2002, 10:21 PM	#17 (permalink)
LeviGarrett76 Registered User Join Date: Sep 2002 Member # 13654 Location: Ga Posts: 1,054	thats a good idea

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode