Pirate 4x4 banner

doubler range box fluid level

579 views 1 reply 2 participants last post by  KWTMECH 
#1 ·
I have a chevy 203 to a ford 205 doubler setup from stazworks and I made the fill plug on the 203 up high on the pto cover like on pictures I have seen of the ORD doubler. Now when I drive it down the road it blows fliud out of the vent till it gets just above half way up the pto cover. Once it gets to that level it quits blowing fluid out. My vent is extended all the way to the top of my bed. Is my vent in the wrong place? I put it in the case in the place on the top of the case that is recessed and it lays almost flat to the top of the case something like this ]-. Or am I just over filling the range box?
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top