I "also" :heart: Tractors - Page 3 - Pirate4x4.Com : 4x4 and Off-Road Forum

RDUB29 · 09-26-2009, 09:55 PM

I picked this up today...

datz510 · 09-26-2009, 09:58 PM

^^^^ AWESOME!

You should R/C that thing.

RDUB29 · 09-26-2009, 10:02 PM

Quote:

Originally Posted by datz510

^^^^ AWESOME!

You should R/C that thing.

I started to grind it, theres still good metal under all that rust.

datz510 · 09-26-2009, 10:11 PM

I'd sandblast it.. don't grind it.

RDUB29 · 09-26-2009, 10:14 PM

Quote:

Originally Posted by datz510

I'd sandblast it.. don't grind it.

Good idea, I just need access to a blaster. I'll have to look around.

whiskeydented · 09-26-2009, 11:12 PM

The only one I have left is the 400, the John Deere was useless any way.

I had put a mounted 2 way plow on the farmall H It was a pretty sweet set up, but the H was a little under powered and 1 plow takes awhile to plow a field. The 400 with the live pto and fast hitch and the 2 bottom is the cats meow for a recreational farmer like me.

RDUB29 · 09-26-2009, 11:23 PM

^^Nice! Love'em all

mudmandan · 09-26-2009, 11:41 PM

Check out the portals on this one,,3feet of clearance under the pumkin

zukesofhazzard · 09-27-2009, 01:01 AM

Quote:

Originally Posted by krawlr

I'll gladly come take that hit-miss in the center off his hands.

I would kill to have one of those little hit and miss engines!

dragoonranch · 09-27-2009, 03:48 AM

I am going on a hunt for our old Farmall 350. It is floating around the county still and I want to get it back.

recoiljunky · 09-27-2009, 06:02 AM

I've got an un-styled '37 John Deere Model B that's been in the family since it was brand new. The motor needs to be repaired / rebuilt.

krawlr · 09-27-2009, 08:51 AM

Quote:

Originally Posted by Chopperman

waste..

Never understood people that hoard stuff just to let it rot away

I had a 1HP H/M that I restored about 15 years ago... Let it go for 500.00...

Weighed in at roughly 600 lbs.... LOL Nice power to weight ratio.

They don't look nearly as bad as the old iron that gets dragged out of the woods in OH/PA. I see a couple that look like they would run today.

It sucks he leaves them outside but they will last much longer than a SBC under those conditions.

He has a nice collection, I'd be in heaven with a backyard like that.

Hot dog · 09-27-2009, 01:24 PM

Quote:

Originally Posted by makya

DAMMIT!!! i need a winter project for the property i'm on, but i'm broke right now. Whattayou wanna bet when i have money again i won't see a deal like that?

That is how it works with me all the time. I just bought a John deere dozer with a 2 cylinder gass engine. I got it for $1200.00 and already pushed a small road. I will get some pictures soon

Juztyn00 · 09-27-2009, 06:14 PM

Quote:

Originally Posted by RDUB29

An off shoot from the barn thread. BTW I love tractors too. Who here did the tractor restore in the garage (I searched)? I believe it was orange. Show what you got. I'll post up pics later.

http://www.pirate4x4.com/forum/showt...703&highlight=

That was me, It was just a repaint not a full restoration. It's still running strong, My dad was out mowing in the woods with it today.

billybob_81067 · 10-01-2009, 09:57 PM

Our International 826. It's my favorite of all our tractors.

We also have 4 Farmall "M" tractors one with a farmhand F-11 loader, one with a 3-point, and two just plain, a farmall 560 with a farmhand F-11 loader, international 826, 966, 1066, 1086, 1586, a 2294 Case, a 8630 Deere, two michigan 35 loaders, a 920 Caterpillar loader, an A-64 Ford Loader, A New Holland HW300 Swather, a New Holland BW38 Balewagon, A Fiat Allis 7-D dozer... and that's about it... Most of these pics are probably already on here different plaes, but I'll repost em. I need to get a digital camera as I don't have one right now! And I know some of these aren't technically tractors, but they're still fun to run!

Farmall "M" with farmhand F-11 Loader

Ass end of the 886

BW38

One of our Michigan loaders and the 920 Cat

8630 Deere

Fiat Allis 7-D Cab has been completely rebuilt since this pic... Bonus shot of our old self propelled New Holland Ensilage cutter in the background.

k5king · 10-02-2009, 12:30 AM

Quote:

Originally Posted by mudtoy67

Dug this thing out of the barn today. I put many miles on this tractor when I was little...~20 years ago. I'm gonna clean it up and give it to my son for Christmas.

you do know they are worth a LOT of money, even as fucked up as that one is. Shiny and original that lil fucker is worth $10k......

FordFascist · 10-02-2009, 12:35 AM

My dad just bought this one out of an old lady's barn Surprisingly it needed very little work to get running. It's mechanically in almost perfect shape, it just needs a bit of paint work.

GONRACIN · 10-02-2009, 01:42 AM

Sweet! A fifteen! Love the old school logo....man, I need to dig my Cat book out now

Quote:

Originally Posted by mudtoy67

Dug this thing out of the barn today. I put many miles on this tractor when I was little...~20 years ago. I'm gonna clean it up and give it to my son for Christmas.

that's awesome. My FIL has a john deere one he had when he was a kid, from 58' I believe. He takes it to shows, and you'd not believe the amount of people that always try to buy it

soilantgreen · 10-02-2009, 04:23 AM

For those interested, I was talking to my mom two nights ago and mentioned that I'd posted a picture of Dad's Super C on a website. She said he's lost interest and wants to sell it.

So if you're anywhere near northeast Ohio and want an old tractor, holler at me. I'll give you a number.

some zilch · 10-02-2009, 05:27 AM

i had a '39ish farmall a "cultivision" when i was kid (10 years ago). i stupidly sold it a few years ago. it had a snowplow, 1-bottom plow, and a cart it could drag around. that thing would always start, cold was non-issue.

i have recently upgraged to a new kubota L4400, 4x4, gear drive trans, blah, blah, blah. i like it

it makes it easy to drag my junk around by myself

mudtoy67 · 10-02-2009, 05:30 AM

Quote:

Originally Posted by k5king

you do know they are worth a LOT of money, even as fucked up as that one is. Shiny and original that lil fucker is worth $10k......

Did not know that.

careful34 · 10-02-2009, 06:02 AM

Quote:

Originally Posted by k5king

you do know they are worth a LOT of money, even as fucked up as that one is. Shiny and original that lil fucker is worth $10k......

I'm imagining suckers willing to pay any where close to that much are few and far between.

PONY_DRIVER · 10-02-2009, 07:01 AM

Quote:

Originally Posted by RDUB29

I picked this up today...

DOOOOOOD! I had one JUST like that when I was a kid. Complete with half missing exhaust stack.

boogerp · 10-02-2009, 01:50 PM

A few pics of my junk.......

1935 International "LA" engine (1 1/2 -2 1/2 hp)

My grandpa's David Bradley tractor I restored in '96.....

85f150dsel · 10-02-2009, 04:44 PM

Quote:

Originally Posted by boogerp

My grandpa's David Bradley tractor I restored in '96.....

What size engine is in that?

My dad just picked up an old Montgomery Ward walk behind that he used to use as a kid, as his mother is cleaning the property up.

His is about a 3hp engine, but the actual physical size of the engine is comparable to a 10-15hp of today. Right now he is using sickle mower on it, he has the blade and cultivators.

09-26-2009, 09:55 PM	#51 (permalink)
RDUB29 Heppy, Heppy, Heppy. Join Date: Jan 2004 Member # 26250 Location: Northern Califizzle! Posts: 418	I picked this up today... Last edited by RDUB29; 09-26-2009 at 09:56 PM.

09-26-2009, 11:12 PM	#56 (permalink)
whiskeydented Registered User Join Date: May 2009 Member # 136619 Location: Connecticut Posts: 76	The only one I have left is the 400, the John Deere was useless any way. I had put a mounted 2 way plow on the farmall H It was a pretty sweet set up, but the H was a little under powered and 1 plow takes awhile to plow a field. The 400 with the live pto and fast hitch and the 2 bottom is the cats meow for a recreational farmer like me. Last edited by whiskeydented; 09-26-2009 at 11:17 PM.

09-27-2009, 03:48 AM	#60 (permalink)
dragoonranch Rock God Join Date: Mar 2006 Member # 69640 Location: Baghdad-Victory Base Posts: 1,024	I am going on a hunt for our old Farmall 350. It is floating around the county still and I want to get it back. __________________ Big Ed '78 Chevy Big-30 TTC 2010 here we come! Thanks to all who voted for us, we are gonna put on one hellufa show! Check out our online store. AMSOIL Your last stop for all your Automotive Synthetic Lubricant needs. Please PM me for quotes or questions. Link to places to wheel in Texas

09-27-2009, 06:02 AM	#61 (permalink)
recoiljunky Registered User Join Date: Sep 2007 Member # 99761 Location: Dothan, Alabama Posts: 350	I've got an un-styled '37 John Deere Model B that's been in the family since it was brand new. The motor needs to be repaired / rebuilt. __________________ Pistol packin', Monkey drinkin', no money bum '75 Bronco with R.A.S. (Raped Ape Syndrome)

10-02-2009, 04:23 AM	#69 (permalink)
soilantgreen F the Gub'ment! Join Date: Mar 2006 Member # 70321 Location: Writing angry letters to anti-2A legislators--like you should be doing! Posts: 3,164	For those interested, I was talking to my mom two nights ago and mentioned that I'd posted a picture of Dad's Super C on a website. She said he's lost interest and wants to sell it. So if you're anywhere near northeast Ohio and want an old tractor, holler at me. I'll give you a number. __________________ http://www.spiderwebshade.com/

09-26-2009, 09:58 PM	#52 (permalink)
datz510 Wheeler Join Date: Dec 2002 Member # 15426 Location: az Posts: 293	^^^^ AWESOME! You should R/C that thing.

09-26-2009, 10:11 PM	#54 (permalink)
datz510 Wheeler Join Date: Dec 2002 Member # 15426 Location: az Posts: 293	I'd sandblast it.. don't grind it.

09-26-2009, 11:23 PM	#57 (permalink)
RDUB29 Heppy, Heppy, Heppy. Join Date: Jan 2004 Member # 26250 Location: Northern Califizzle! Posts: 418	^^Nice! Love'em all

09-26-2009, 11:41 PM	#58 (permalink)
mudmandan Registered User Join Date: Feb 2008 Member # 109701 Posts: 71	Check out the portals on this one,,3feet of clearance under the pumkin

10-01-2009, 09:57 PM	#65 (permalink)
billybob_81067 Granite Guru Join Date: Aug 2005 Member # 52387 Location: Rocky Ford, Colorado Posts: 896	Our International 826. It's my favorite of all our tractors. We also have 4 Farmall "M" tractors one with a farmhand F-11 loader, one with a 3-point, and two just plain, a farmall 560 with a farmhand F-11 loader, international 826, 966, 1066, 1086, 1586, a 2294 Case, a 8630 Deere, two michigan 35 loaders, a 920 Caterpillar loader, an A-64 Ford Loader, A New Holland HW300 Swather, a New Holland BW38 Balewagon, A Fiat Allis 7-D dozer... and that's about it... Most of these pics are probably already on here different plaes, but I'll repost em. I need to get a digital camera as I don't have one right now! And I know some of these aren't technically tractors, but they're still fun to run! Farmall "M" with farmhand F-11 Loader Ass end of the 886 BW38 One of our Michigan loaders and the 920 Cat 8630 Deere Fiat Allis 7-D Cab has been completely rebuilt since this pic... Bonus shot of our old self propelled New Holland Ensilage cutter in the background.

10-02-2009, 05:27 AM	#70 (permalink)
some zilch one handed mechanic Join Date: Aug 2008 Member # 119289 Location: too far gone Posts: 727	i had a '39ish farmall a "cultivision" when i was kid (10 years ago). i stupidly sold it a few years ago. it had a snowplow, 1-bottom plow, and a cart it could drag around. that thing would always start, cold was non-issue. i have recently upgraged to a new kubota L4400, 4x4, gear drive trans, blah, blah, blah. i like it it makes it easy to drag my junk around by myself __________________ [i got nothin' Last edited by some zilch; 10-02-2009 at 05:29 AM.

10-02-2009, 01:50 PM	#74 (permalink)
boogerp Registered User Join Date: Jan 2008 Member # 107600 Location: Nash-hell, TN/ Maryville, TN Posts: 54	A few pics of my junk....... 1935 International "LA" engine (1 1/2 -2 1/2 hp) My grandpa's David Bradley tractor I restored in '96.....

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode