Guido's 1965 Scout 80 - Page 5 - Pirate4x4.Com : 4x4 and Off-Road Forum
 
Pirate4x4.Com : 4x4 and Off-Road Forum  

Go Back   Pirate4x4.Com : 4x4 and Off-Road Forum > Brand Specific Tech > International Harvester
Notices

Reply
 
Share Thread Tools Display Modes
Old 07-03-2009, 07:51 PM   #101 (permalink)
Addicted to Gear Oil
 
guidolyons's Avatar
 
Join Date: Oct 2005
Member # 56050
Location: Corpus Christi, TX
Posts: 5,832
Thanks warpony

Here's another video that I finally got uploaded:

http://s26.photobucket.com/player.sw...fs=1&os=1&ap=1

Installed the rear fuel tank from the F250 between the frame just behind the transfercases.
Name:  P6260109.JPG
Views: 5632
Size:  32.2 KB

Made a mount for the filler neck:


Name:  P6240102.JPG
Views: 3914
Size:  28.5 KB

Name:  P6250105.JPG
Views: 4010
Size:  23.7 KB


Exhaust won't fit over the axle and clear the fuel tank, so I turned it to come out just ahead of the rear wheelwell.

Name:  P6300113.JPG
Views: 4332
Size:  35.0 KB

Name:  P6300112.JPG
Views: 4017
Size:  36.1 KB
__________________
1965 Scout 80 7.3PSD/ZF/203/205 D60F/14BFF
Member: 4 Jackstand Wheeler's Association
Quote:
Originally Posted by General Dwight D. Eisenhower
History does not long entrust the care of freedom to the weak or the timid.

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

For the best deal on 8 lug disc brakes click here-->
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Last edited by guidolyons; 07-03-2009 at 08:11 PM.
guidolyons is offline   Reply With Quote Quick reply to this message
Old 07-03-2009, 07:56 PM   #102 (permalink)
Addicted to Gear Oil
 
guidolyons's Avatar
 
Join Date: Oct 2005
Member # 56050
Location: Corpus Christi, TX
Posts: 5,832
Then I started on the wiring:
Name:  P6210096.JPG
Views: 3881
Size:  34.6 KB

It wasn't too bad, I had labeled everything well when I took it out of the F250 and most of the connections would only attach one way.

The PCM and injector control module fit perfectly right in a small ammo can

Name:  P6220098.JPG
Views: 3973
Size:  32.9 KB

Sealed around the connections with some RTV and mounted it to the fender along with the fuse/relay box.

Name:  P7030117.JPG
Views: 3850
Size:  35.0 KB

Name:  P7030116.JPG
Views: 4141
Size:  37.3 KB
__________________
1965 Scout 80 7.3PSD/ZF/203/205 D60F/14BFF
Member: 4 Jackstand Wheeler's Association
Quote:
Originally Posted by General Dwight D. Eisenhower
History does not long entrust the care of freedom to the weak or the timid.

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

For the best deal on 8 lug disc brakes click here-->
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
guidolyons is offline   Reply With Quote Quick reply to this message
Sponsored Links
Old 07-03-2009, 08:16 PM   #103 (permalink)
Addicted to Gear Oil
 
guidolyons's Avatar
 
Join Date: Oct 2005
Member # 56050
Location: Corpus Christi, TX
Posts: 5,832
The GM 205 I had has the long slipjoint output, so I swapped the shorter 32 spline Ford output with yoke.

Ford 205 on the left and GM 205 on the right:
Name:  P6090012.JPG
Views: 4769
Size:  32.4 KB

Name:  P6090015.JPG
Views: 4060
Size:  42.5 KB

Name:  P6090022.JPG
Views: 4209
Size:  38.2 KB
While, I had the output shaft out, did the twin-stick mod to the shift rail only took about 30 min.

Remove the detent ball and knock out the freeze plug and roll pin:

Name:  P6090018.JPG
Views: 4019
Size:  42.8 KB

Name:  P6090019.JPG
Views: 3970
Size:  34.0 KB
__________________
1965 Scout 80 7.3PSD/ZF/203/205 D60F/14BFF
Member: 4 Jackstand Wheeler's Association
Quote:
Originally Posted by General Dwight D. Eisenhower
History does not long entrust the care of freedom to the weak or the timid.

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

For the best deal on 8 lug disc brakes click here-->
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
guidolyons is offline   Reply With Quote Quick reply to this message
 
Old 07-03-2009, 08:22 PM   #104 (permalink)
Addicted to Gear Oil
 
guidolyons's Avatar
 
Join Date: Oct 2005
Member # 56050
Location: Corpus Christi, TX
Posts: 5,832
It's easy to see on the stock shift rail where the detent balls ride and need to be ground down:
Name:  P6090020.JPG
Views: 3803
Size:  20.9 KB

Marked it with a marker and took a few passes with a flap wheel on the grinder:

Name:  P6090021.JPG
Views: 3880
Size:  23.8 KB

Reinstalled the shift rail and then I bolted up the 205 to the 203 and adpater plate so I could mock up and figure out how far I could clock the 205. It's about 19.5" long.
Name:  P6090023.JPG
Views: 4082
Size:  36.4 KB

I was hoping to get the 205 rotated up far enough with out hitting the frame... oops

Name:  P6090025.JPG
Views: 3753
Size:  29.7 KB

A little notching was required:

Name:  P6100033.JPG
Views: 3796
Size:  39.4 KB
__________________
1965 Scout 80 7.3PSD/ZF/203/205 D60F/14BFF
Member: 4 Jackstand Wheeler's Association
Quote:
Originally Posted by General Dwight D. Eisenhower
History does not long entrust the care of freedom to the weak or the timid.

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

For the best deal on 8 lug disc brakes click here-->
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
guidolyons is offline   Reply With Quote Quick reply to this message
Old 07-03-2009, 08:25 PM   #105 (permalink)
Addicted to Gear Oil
 
guidolyons's Avatar
 
Join Date: Oct 2005
Member # 56050
Location: Corpus Christi, TX
Posts: 5,832
I boxed the frame reinforce it:
Name:  P6170081.JPG
Views: 3776
Size:  28.6 KB

Name:  P6180094.JPG
Views: 3837
Size:  30.9 KB
It looks like it hangs down a lot, but it's only about 3" below the frame rail.

203 205 doubler from the rear, before I installed the fuel tank:
Name:  P6180095.JPG
Views: 4078
Size:  38.3 KB
__________________
1965 Scout 80 7.3PSD/ZF/203/205 D60F/14BFF
Member: 4 Jackstand Wheeler's Association
Quote:
Originally Posted by General Dwight D. Eisenhower
History does not long entrust the care of freedom to the weak or the timid.

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

For the best deal on 8 lug disc brakes click here-->
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Last edited by guidolyons; 07-03-2009 at 08:27 PM.
guidolyons is offline   Reply With Quote Quick reply to this message
Old 07-04-2009, 08:18 AM   #106 (permalink)
Registered User
 
Join Date: Jan 2008
Member # 105834
Location: Vacaville, California
Posts: 1,139
Guido ,That 7.3 sounds so good in that scout. Great job, now get a 60 under the front end and you are set.
__________________
war pony build


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
war pony is offline   Reply With Quote Quick reply to this message
Old 07-04-2009, 10:29 PM   #107 (permalink)
Pirate4x4 Addict!
 
Mechanos's Avatar
 
Join Date: Aug 2001
Member # 6704
Location: Roosterville, Missouri
Posts: 7,036
Quote:
Originally Posted by guidolyons View Post
The GM 205 I had has the long slipjoint output, so I swapped the shorter 32 spline Ford output with yoke.

Ford 205 on the left and GM 205 on the right:
Attachment 452170

Attachment 452171

Attachment 452173
While, I had the output shaft out, did the twin-stick mod to the shift rail only took about 30 min.

Remove the detent ball and knock out the freeze plug and roll pin:

Attachment 452174

Attachment 452175
I hope you swapped front shafts while you were in the 205.
__________________
It's
IHeavy
aka TORC
KC0UIC
-.- -.-. ----- ..- .. -.-.

Nothing is foolproof to a sufficiently talented fool.
Mechanos is offline   Reply With Quote Quick reply to this message
Old 07-05-2009, 07:18 AM   #108 (permalink)
Addicted to Gear Oil
 
guidolyons's Avatar
 
Join Date: Oct 2005
Member # 56050
Location: Corpus Christi, TX
Posts: 5,832
Quote:
Originally Posted by Mechanos View Post
I hope you swapped front shafts while you were in the 205.
I didn't, but I will. I still need to swap the front output and figure out the front driveshaft, I think it will be a 2 piece with a carrier bearing since it will be about 4 feet long Both the Chevy and Ford 205 has wussy 1310 front yokes, so when I get a new yoke, I'll swap in the 32spline ford front output.
__________________
1965 Scout 80 7.3PSD/ZF/203/205 D60F/14BFF
Member: 4 Jackstand Wheeler's Association
Quote:
Originally Posted by General Dwight D. Eisenhower
History does not long entrust the care of freedom to the weak or the timid.

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

For the best deal on 8 lug disc brakes click here-->
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Last edited by guidolyons; 08-01-2010 at 06:38 AM.
guidolyons is offline   Reply With Quote Quick reply to this message
Old 07-28-2009, 10:48 AM   #109 (permalink)
Addicted to Gear Oil
 
guidolyons's Avatar
 
Join Date: Oct 2005
Member # 56050
Location: Corpus Christi, TX
Posts: 5,832
With the move and all, work on the Scout has taken a back seat to getting boxes unpacked and getting the garage organized. After working in the garage-mahal, it will be hard to go back to just a "2" car garage. I only have a few more weeks left before my vacation leave days are up and I have to go to Ft Benning and I will be Scoutless

So I am trying to get as much done as I can before I leave.

I got some new shoes for the Scout BFG KM2 37x12.50-17 Should work nicely with the 4.10 gears and the PSD.

Name:  P7270154.JPG
Views: 3579
Size:  30.2 KB

Name:  P7270153.JPG
Views: 3656
Size:  34.5 KB
__________________
1965 Scout 80 7.3PSD/ZF/203/205 D60F/14BFF
Member: 4 Jackstand Wheeler's Association
Quote:
Originally Posted by General Dwight D. Eisenhower
History does not long entrust the care of freedom to the weak or the timid.

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

For the best deal on 8 lug disc brakes click here-->
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
guidolyons is offline   Reply With Quote Quick reply to this message
Old 07-28-2009, 05:29 PM   #110 (permalink)
Registered User
 
Join Date: Jan 2008
Member # 105834
Location: Vacaville, California
Posts: 1,139
Nice shoes, Guido. I hope you wont be gone too long.
__________________
war pony build


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
war pony is offline   Reply With Quote Quick reply to this message
Old 08-14-2009, 09:27 PM   #111 (permalink)
Addicted to Gear Oil
 
guidolyons's Avatar
 
Join Date: Oct 2005
Member # 56050
Location: Corpus Christi, TX
Posts: 5,832
Got the tires mounted and balanced (airsoft BBs) just in time to put it on jack stands and sit until I get home.

Much mo'better than the tiny worn out swampers I had for rollers might need a little trimming for full flex

Name:  P8110188.JPG
Views: 3954
Size:  29.8 KB

Name:  P8110190.JPG
Views: 3621
Size:  26.1 KB

Name:  P8110191.JPG
Views: 3624
Size:  25.8 KB
__________________
1965 Scout 80 7.3PSD/ZF/203/205 D60F/14BFF
Member: 4 Jackstand Wheeler's Association
Quote:
Originally Posted by General Dwight D. Eisenhower
History does not long entrust the care of freedom to the weak or the timid.

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

For the best deal on 8 lug disc brakes click here-->
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
guidolyons is offline   Reply With Quote Quick reply to this message
Old 08-14-2009, 10:02 PM   #112 (permalink)
Granite Guru
 
levi1a's Avatar
 
Join Date: Jan 2008
Member # 106935
Location: crossville TN.
Posts: 771
Looking . This should be an instant link to anyone asking will there engine swap project fit/work. Along with the proper Pirate STFU Noob of course.
__________________

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.




To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.



SEBA
levi1a is offline   Reply With Quote Quick reply to this message
Old 08-22-2009, 07:50 PM   #113 (permalink)
Registered User
 
Brandon's Avatar
 
Join Date: Mar 1975
Member # 6
Location: Pollock Pines, CA
Posts: 8,283
Send a message via ICQ to Brandon
Quote:
Originally Posted by guidolyons View Post
Swapped in a steering column from late 80's Chevy, and power steering box from '95 Chevy with Ballistic Fab hi-steer arms (wagoneer knuckles milled by Jnutter), drop pitman arm for late 70's wagoneer.


Attachment 423912

Attachment 423913

And donned my blue nitrile gloves and swapped in a master cylinder from a 4 wheel disc brake '79 grand marquis (thanks HoS)
Attachment 423914

Rear bumper 90% complete, I'm waiting to finish once I decide how much to cut the rear quarters.

Attachment 423917

More pics of the rear bumper? I am brainstorming mine - guessing most people just ditch the stock rear body mount crossmember doohicky?
__________________
This Space for rent!
Brandon is offline   Reply With Quote Quick reply to this message
Old 08-22-2009, 08:46 PM   #114 (permalink)
Addicted to Gear Oil
 
guidolyons's Avatar
 
Join Date: Oct 2005
Member # 56050
Location: Corpus Christi, TX
Posts: 5,832
Brandon, unfortunatly I didn't take very many pics of the rear bumper build. The bottom pic a few post up from this one has one of the better pics of it. I posted a pic in your thread. I went back and looked through my pics and found another:

Name:  P7040040.jpg
Views: 3946
Size:  64.8 KB
__________________
1965 Scout 80 7.3PSD/ZF/203/205 D60F/14BFF
Member: 4 Jackstand Wheeler's Association
Quote:
Originally Posted by General Dwight D. Eisenhower
History does not long entrust the care of freedom to the weak or the timid.

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

For the best deal on 8 lug disc brakes click here-->
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
guidolyons is offline   Reply With Quote Quick reply to this message
Old 08-23-2009, 10:48 AM   #115 (permalink)
Zeus of the Sluice
 
Join Date: Jan 2003
Member # 16680
Location: Rocklin
Posts: 3,530
19 gallon tank? I plan to use a ford tank too, and am going to cut and splice the fuel tank door into the scout, but thats a great idea too. the Van tank (e250) is nearly the same size, and 22 gallons, if you are looking for a little more.

are those locked H2's?
__________________

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.



To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
plug ugly is offline   Reply With Quote Quick reply to this message
Old 08-23-2009, 03:37 PM   #116 (permalink)
Addicted to Gear Oil
 
guidolyons's Avatar
 
Join Date: Oct 2005
Member # 56050
Location: Corpus Christi, TX
Posts: 5,832
Quote:
Originally Posted by plug ugly View Post
19 gallon tank? I plan to use a ford tank too, and am going to cut and splice the fuel tank door into the scout, but thats a great idea too. the Van tank (e250) is nearly the same size, and 22 gallons, if you are looking for a little more.

are those locked H2's?
Yeah, Ballistic H2 aluminum beadlocks, I was going to run H1's but I wanted to be have the option to swap wheels/and or tires with my Dodge, so I started looking for some 17" rims, found them for sale on PBB.


Yeah, stock ford 19 gallon rear tank. Worked like it was meant to fit there. It's turned 90* from stock orientation, so the fuel lines are on the driver's side and the fuel filler faces to the rear. I still have my saddle tanks and I *think* I will be able to use the stock fuel tank selctor valve to feed the main center tank. 19 gallons should be plenty, +20 gallons in the saddle tanks will more than sufficent

The ford tank is ~35"x27"x8" if it was any deeper and there will be clearence issues with rear driveshaft and/or rear axle, depending on transfercase/drivetrain combo.
__________________
1965 Scout 80 7.3PSD/ZF/203/205 D60F/14BFF
Member: 4 Jackstand Wheeler's Association
Quote:
Originally Posted by General Dwight D. Eisenhower
History does not long entrust the care of freedom to the weak or the timid.

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

For the best deal on 8 lug disc brakes click here-->
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
guidolyons is offline   Reply With Quote Quick reply to this message
Old 08-23-2009, 07:28 PM   #117 (permalink)
Zeus of the Sluice
 
Join Date: Jan 2003
Member # 16680
Location: Rocklin
Posts: 3,530
could you fit a second tank over the pumpkin to the bumper?
__________________

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.



To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
plug ugly is offline   Reply With Quote Quick reply to this message
Old 08-24-2009, 05:22 PM   #118 (permalink)
Addicted to Gear Oil
 
guidolyons's Avatar
 
Join Date: Oct 2005
Member # 56050
Location: Corpus Christi, TX
Posts: 5,832
Quote:
Originally Posted by plug ugly View Post
could you fit a second tank over the pumpkin to the bumper?
That's where I originally planned to put it, but without more suspension lift or body lift, there's not much room directly above the rear axle. There is a small amount of room behind the axle, so if you had to, you could probably cram a small tank back there.
__________________
1965 Scout 80 7.3PSD/ZF/203/205 D60F/14BFF
Member: 4 Jackstand Wheeler's Association
Quote:
Originally Posted by General Dwight D. Eisenhower
History does not long entrust the care of freedom to the weak or the timid.

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

For the best deal on 8 lug disc brakes click here-->
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
guidolyons is offline   Reply With Quote Quick reply to this message
Old 08-29-2009, 06:50 PM   #119 (permalink)
Registered User
 
Join Date: Aug 2009
Member # 141191
Location: Connecticut
Posts: 8
Looking Good!
__________________
NortheastIH.com Parts and Fabrication for International Harvesters.
NEIH is offline   Reply With Quote Quick reply to this message
Old 08-01-2010, 06:55 AM   #120 (permalink)
Addicted to Gear Oil
 
guidolyons's Avatar
 
Join Date: Oct 2005
Member # 56050
Location: Corpus Christi, TX
Posts: 5,832
I have a small update. I was home for 2 weeks of midtour leave in July. I spent 5 days in Vegas, and just vegged out for a few days, but I did manage to get in a little bit of work one day. While I've been deployed I have been ordering parts (shocks, XRC-10 winch, ARB for the 14BFF, Wild Horse EB flares and some other odds and ends, gauges, etc) so I'll have a bunch to do when I get home. I have been brainstorming on what I wanted to do to fix my rockers. I had some rust and I wanted to build some rocker protection. I like Scout254's rockers and decided to do a mini-boatside similar to his. I get to cut out some rust and will gain 2-3" under the rocker panels.

Here's a googlesketch of my idea:




With some blue painters tape I marked off a straight line and chopped off the bottom of the rockers ~5-6".
Here's a piece of 2x2x.188 angle that will form the base and inner structure of the boatside. The inner rocker will be trimmed flush with the floor and the bottom of the boatside will have a piece of ~1x3 tube to account for the step between the floor and the bottom of the gastank. It will all get skinned with some 3/16" strap to give a smooth surface and protect from wheelwell to wheellwell.







When I get home for good, I'll be getting transferred so I'll have a super wrench-a-thon. I have to get the Scout road worthy and registered ASAP so I can get it on the boat to Hawaii.
__________________
1965 Scout 80 7.3PSD/ZF/203/205 D60F/14BFF
Member: 4 Jackstand Wheeler's Association
Quote:
Originally Posted by General Dwight D. Eisenhower
History does not long entrust the care of freedom to the weak or the timid.

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

For the best deal on 8 lug disc brakes click here-->
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Last edited by guidolyons; 08-01-2010 at 06:57 AM.
guidolyons is offline   Reply With Quote Quick reply to this message
Old 08-01-2010, 07:54 AM   #121 (permalink)
Registered User
 
Join Date: Jan 2008
Member # 105834
Location: Vacaville, California
Posts: 1,139
Thats a long way from Texas, even farther from the sand box.
__________________
war pony build


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
war pony is offline   Reply With Quote Quick reply to this message
Old 08-01-2010, 08:15 AM   #122 (permalink)
Addicted to Gear Oil
 
guidolyons's Avatar
 
Join Date: Oct 2005
Member # 56050
Location: Corpus Christi, TX
Posts: 5,832
Yes, yes it is.

Nothing like a PCS move to put the pressure on I work better under pressure. I should be able to get some good wrench time in and the garage won't be 120*

So...slacker, made any progress on the Warpony?
__________________
1965 Scout 80 7.3PSD/ZF/203/205 D60F/14BFF
Member: 4 Jackstand Wheeler's Association
Quote:
Originally Posted by General Dwight D. Eisenhower
History does not long entrust the care of freedom to the weak or the timid.

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

For the best deal on 8 lug disc brakes click here-->
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
guidolyons is offline   Reply With Quote Quick reply to this message
Old 08-01-2010, 08:54 AM   #123 (permalink)
Registered User
 
binderbound's Avatar
 
Join Date: Apr 2003
Member # 18592
Location: Redmond, Oregon
Posts: 3,793
Send a message via AIM to binderbound
WOW! I just read this thing from start to last post. A-mazing! This was one great build. Maybe, someday I'll get to see it in person.

__________________

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
binderbound is offline   Reply With Quote Quick reply to this message
Old 08-01-2010, 09:37 AM   #124 (permalink)
Addicted to Gear Oil
 
guidolyons's Avatar
 
Join Date: Oct 2005
Member # 56050
Location: Corpus Christi, TX
Posts: 5,832
Thanks BinderBound I remember reading through your TracTracTor build back when I first got my Scout.
__________________
1965 Scout 80 7.3PSD/ZF/203/205 D60F/14BFF
Member: 4 Jackstand Wheeler's Association
Quote:
Originally Posted by General Dwight D. Eisenhower
History does not long entrust the care of freedom to the weak or the timid.

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

For the best deal on 8 lug disc brakes click here-->
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
guidolyons is offline   Reply With Quote Quick reply to this message
Old 08-01-2010, 10:28 AM   #125 (permalink)
Zeus of the Sluice
 
Join Date: Jan 2003
Member # 16680
Location: Rocklin
Posts: 3,530
guido, any chance you can measure those 52's from centerpin to front spring eye bolt? Im trying to get an idea of the actual length under load. Im guessing about 24"
__________________

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.



To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Last edited by plug ugly; 08-01-2010 at 10:30 AM.
plug ugly is offline   Reply With Quote Quick reply to this message
Reply

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the Pirate4x4.Com : 4x4 and Off-Road Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.

** A VERIFICATION EMAIL IS SENT TO THIS ADDRESS TO COMPLETE REGISTRATION!! **

Email Address:
Insurance
Please select your insurance company (Optional)

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -7. The time now is 11:58 AM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 ©2011, Crawlability, Inc.
User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.