Stinkyfab Update - Pirate4x4.Com : 4x4 and Off-Road Forum

Spank · 07-01-2003, 02:53 PM

Dallas asked me to post these, pictures of his updated work, so here goes.

#1

Spank · 07-01-2003, 02:55 PM

#2

Spank · 07-01-2003, 02:58 PM

#3

Spank · 07-01-2003, 03:00 PM

#4

Spank · 07-01-2003, 03:02 PM

#5

Spank · 07-01-2003, 03:04 PM

Nice work Dallas. It turned out really well. I need to bring my heep down there to add to my cage, and do some tube work.

StinkBug · 07-01-2003, 04:47 PM

thanks for postin the pics will. I'm gonna try to get some shots tonight with the front fenders on, and this weekend we'll have to get some with all the panels off

BTW that jeep next to it is a legit D-Day jeep owned by my boss, and it has only 627 miles on it

Dallas

94rodeo · 07-01-2003, 04:54 PM

Dallas, are you going for the ugliest truck award for next year or what?

Looks like you have that tube bending down now.

Troy

StinkBug · 07-01-2003, 04:59 PM

:yep, goin for three years in a row. gonna have to work hard tho, randii might actually bring Uzi next year

Dallas

rotozuk · 07-01-2003, 05:16 PM

Hey, I might just bring my shit out next year.. I have won the ugly award before.. but I feel cheated as Uzi was not in the run that year.. something about an unfair advantage Randii had on that award.

-Wayne (damn my turbo fell off)

94rodeo · 07-01-2003, 06:00 PM

I am beginning to think that Uzi is a myth.

randii · 07-01-2003, 06:19 PM

trooper4life · 07-01-2003, 07:48 PM

LMAO

Yeah Iheard there was someone that was going to be putting a 5.0 in. Have yah'll heard anything about that. LOL

Later,
Daniel

Dust · 07-01-2003, 10:28 PM

lookin good dallas! way cool! much cooler than I pictured from you describing it on the phone.

Independent4x · 07-02-2003, 11:14 AM

i'd like to see a little more tube in there for added strength in a roll

if nothing else a spreader acress the bottom of the windshield.

also some triangulation in the back.

excellent start

i dig the front....looking to see a pic w/ fenders on.

ramv · 07-02-2003, 12:06 PM

It has had a 5.0 in it. I have seen it. i can't verify its actually mounted to anything or has an intake but I can tell you it exists and has had a 5.0 slipped into its no longer virgin engine compartment.

StinkBug · 07-02-2003, 12:47 PM

yep, its gettin a spreader across the windshield, a couple more up top, and a good bit more tube behind the roof as well. I dont count on it providing full roll protection for either the body or occupants (thats what the internal cage is for) Mostly the upper section is just to protect from rock rash and give me something to slide against rock walls and such. It'll probably help in a flop, but i'm not counting on it saving the body in a full roll.

Dallas

Spank · 07-02-2003, 02:29 PM

#6

Spank · 07-02-2003, 02:31 PM

#7

Spank · 07-02-2003, 02:32 PM

#8

UZI 9mm · 07-02-2003, 04:14 PM

Quote:

Originally posted by 94rodeo
I am beginning to think that Uzi is a myth.

I am?

cool.

Dust · 07-02-2003, 06:39 PM

damn thats slick how you can get your fenders on over the tube

D60 · 07-03-2003, 09:26 AM

Looks great Dallas!

IsuzuCrawler · 07-08-2003, 08:10 AM

Dallas what type of tube bender are you using for this? how much did it run you ? i've been thinking about getting one if there not to bad. thanks

Independent4x · 07-09-2003, 12:49 PM

i'm pretty sure Dallas got the JD2 bender.........Model 3:

http://www.jd2.com/

search and you will find a ton of conversation on Benders

07-01-2003, 02:53 PM	#1 (permalink)
Spank Registered User Join Date: Jun 2002 Member # 12504 Location: Palm Desert, CA Posts: 808	Stinkyfab Update Dallas asked me to post these, pictures of his updated work, so here goes. #1 Attached Images __________________ -Will

07-01-2003, 02:55 PM	#2 (permalink)
Spank Registered User Join Date: Jun 2002 Member # 12504 Location: Palm Desert, CA Posts: 808	#2 Attached Images __________________ -Will

07-01-2003, 02:58 PM	#3 (permalink)
Spank Registered User Join Date: Jun 2002 Member # 12504 Location: Palm Desert, CA Posts: 808	#3 Attached Images __________________ -Will

07-01-2003, 03:00 PM	#4 (permalink)
Spank Registered User Join Date: Jun 2002 Member # 12504 Location: Palm Desert, CA Posts: 808	#4 Attached Images __________________ -Will

07-01-2003, 03:02 PM	#5 (permalink)
Spank Registered User Join Date: Jun 2002 Member # 12504 Location: Palm Desert, CA Posts: 808	#5 Attached Images __________________ -Will

07-01-2003, 03:04 PM	#6 (permalink)
Spank Registered User Join Date: Jun 2002 Member # 12504 Location: Palm Desert, CA Posts: 808	Nice work Dallas. It turned out really well. I need to bring my heep down there to add to my cage, and do some tube work. __________________ -Will

07-01-2003, 04:47 PM	#7 (permalink)
StinkBug StinkyFab Racing Join Date: May 2001 Member # 4946 Location: San Diego Posts: 6,146	thanks for postin the pics will. I'm gonna try to get some shots tonight with the front fenders on, and this weekend we'll have to get some with all the panels off BTW that jeep next to it is a legit D-Day jeep owned by my boss, and it has only 627 miles on it Dallas __________________ Dallas Ashley StinkyFab Racing (SFR) - Custom Fabrication Your Source for: CNC Cutting & Engraving, Cages, Custom Suspension, Complete Vehicle Builds, and more! Overall Winner, 2012 KOH EMC. Gettin it done in a stocker! Co-Dog #4432-KOH 2011 #88-KOH 2010, Crew Chief - KOH 2009, 2008

07-01-2003, 04:54 PM	#8 (permalink)
94rodeo Registered User Join Date: Oct 2002 Member # 14613 Location: castledale utah Posts: 131	Dallas, are you going for the ugliest truck award for next year or what? Looks like you have that tube bending down now. Troy

07-01-2003, 04:59 PM	#9 (permalink)
StinkBug StinkyFab Racing Join Date: May 2001 Member # 4946 Location: San Diego Posts: 6,146	:yep, goin for three years in a row. gonna have to work hard tho, randii might actually bring Uzi next year Dallas __________________ Dallas Ashley StinkyFab Racing (SFR) - Custom Fabrication Your Source for: CNC Cutting & Engraving, Cages, Custom Suspension, Complete Vehicle Builds, and more! Overall Winner, 2012 KOH EMC. Gettin it done in a stocker! Co-Dog #4432-KOH 2011 #88-KOH 2010, Crew Chief - KOH 2009, 2008

07-01-2003, 05:16 PM	#10 (permalink)
rotozuk Registered User Join Date: Dec 2001 Member # 8965 Location: Lake Forest, CA Posts: 4,028	Hey, I might just bring my shit out next year.. I have won the ugly award before.. but I feel cheated as Uzi was not in the run that year.. something about an unfair advantage Randii had on that award. -Wayne (damn my turbo fell off)

07-01-2003, 06:00 PM	#11 (permalink)
94rodeo Registered User Join Date: Oct 2002 Member # 14613 Location: castledale utah Posts: 131	I am beginning to think that Uzi is a myth.

07-01-2003, 06:19 PM	#12 (permalink)
randii Pirate4x4 Addict! Join Date: Mar 2000 Member # 347 Location: Fair Oaks, CA Posts: 10,082

07-01-2003, 07:48 PM	#13 (permalink)
trooper4life Registered User Join Date: Apr 2003 Member # 19144 Location: washington NC Posts: 101	LMAO Yeah Iheard there was someone that was going to be putting a 5.0 in. Have yah'll heard anything about that. LOL Later, Daniel

07-01-2003, 10:28 PM	#14 (permalink)
Dust Registered User Join Date: Jan 2002 Member # 9094 Location: Arizona Posts: 156	lookin good dallas! way cool! much cooler than I pictured from you describing it on the phone. __________________ 86 Toyota with stuff

07-02-2003, 11:14 AM	#15 (permalink)
Independent4x technical expert Join Date: Dec 2001 Member # 8755 Location: Richmond, Va Posts: 2,188	i'd like to see a little more tube in there for added strength in a roll if nothing else a spreader acress the bottom of the windshield. also some triangulation in the back. excellent start i dig the front....looking to see a pic w/ fenders on. __________________ Matt, Owner: Independent4x www.independent4x.com 804-550-0480: 9am-6pm EST UFWDA Life Member - http://www.ufwda.org/ Full Service Fabrication Shop & Retail Store located in Richmond, Va. for all your OffRoad needs: featuring Sway-A-Way, WARN, ARB/OME, AEV, Advance Adapters, TeraFlex, Trailready, Currie, QA1, Beard Seats, Interco Tire, D.O.M. Tube to length, etc. - call or PM Last edited by Independent4x; 07-02-2003 at 01:01 PM.

07-02-2003, 12:06 PM	#16 (permalink)
ramv Registered User Join Date: May 2002 Member # 11921 Location: Denver Posts: 3,129	It has had a 5.0 in it. I have seen it. i can't verify its actually mounted to anything or has an intake but I can tell you it exists and has had a 5.0 slipped into its no longer virgin engine compartment. __________________ My build thread: [url]http://www.pirate4x4.com/forum/showthread.php?t=508537[/url]

07-02-2003, 12:47 PM	#17 (permalink)
StinkBug StinkyFab Racing Join Date: May 2001 Member # 4946 Location: San Diego Posts: 6,146	yep, its gettin a spreader across the windshield, a couple more up top, and a good bit more tube behind the roof as well. I dont count on it providing full roll protection for either the body or occupants (thats what the internal cage is for) Mostly the upper section is just to protect from rock rash and give me something to slide against rock walls and such. It'll probably help in a flop, but i'm not counting on it saving the body in a full roll. Dallas __________________ Dallas Ashley StinkyFab Racing (SFR) - Custom Fabrication Your Source for: CNC Cutting & Engraving, Cages, Custom Suspension, Complete Vehicle Builds, and more! Overall Winner, 2012 KOH EMC. Gettin it done in a stocker! Co-Dog #4432-KOH 2011 #88-KOH 2010, Crew Chief - KOH 2009, 2008

07-02-2003, 02:29 PM	#18 (permalink)
Spank Registered User Join Date: Jun 2002 Member # 12504 Location: Palm Desert, CA Posts: 808	#6 Attached Images __________________ -Will

07-02-2003, 02:31 PM	#19 (permalink)
Spank Registered User Join Date: Jun 2002 Member # 12504 Location: Palm Desert, CA Posts: 808	#7 Attached Images __________________ -Will

07-02-2003, 02:32 PM	#20 (permalink)
Spank Registered User Join Date: Jun 2002 Member # 12504 Location: Palm Desert, CA Posts: 808	#8 Attached Images __________________ -Will

07-02-2003, 06:39 PM	#22 (permalink)
Dust Registered User Join Date: Jan 2002 Member # 9094 Location: Arizona Posts: 156	damn thats slick how you can get your fenders on over the tube __________________ 86 Toyota with stuff

07-03-2003, 09:26 AM	#23 (permalink)
D60 Zeus of the Sluice Join Date: Aug 2001 Member # 6398 Location: CO Posts: 3,351	Looks great Dallas! __________________ "Take 300 people and on average 290 of them just generally suck at life"

07-08-2003, 08:10 AM	#24 (permalink)
IsuzuCrawler Registered User Join Date: Jun 2003 Member # 20520 Location: Greenville, NC Posts: 180	Dallas what type of tube bender are you using for this? how much did it run you ? i've been thinking about getting one if there not to bad. thanks __________________ 89 Isuzu Trooper RS shorty 2dr, yota axles front and rear with 5.29s, 35x15.5 baja claws. The best looking yard art in town.

07-09-2003, 12:49 PM	#25 (permalink)
Independent4x technical expert Join Date: Dec 2001 Member # 8755 Location: Richmond, Va Posts: 2,188	i'm pretty sure Dallas got the JD2 bender.........Model 3: http://www.jd2.com/ search and you will find a ton of conversation on Benders __________________ Matt, Owner: Independent4x www.independent4x.com 804-550-0480: 9am-6pm EST UFWDA Life Member - http://www.ufwda.org/ Full Service Fabrication Shop & Retail Store located in Richmond, Va. for all your OffRoad needs: featuring Sway-A-Way, WARN, ARB/OME, AEV, Advance Adapters, TeraFlex, Trailready, Currie, QA1, Beard Seats, Interco Tire, D.O.M. Tube to length, etc. - call or PM

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode