JD Squared, Inc. MAD Series Cutting Tables - Pirate4x4.Com : 4x4 and Off-Road Forum
 
Pirate4x4.Com : 4x4 and Off-Road Forum  

Go Back   Pirate4x4.Com : 4x4 and Off-Road Forum > Vendor Forums > JD Squared, Inc
Notices

Reply
 
Share Thread Tools Display Modes
Old 06-21-2016, 12:49 PM   #1 (permalink)
P4x4 Vendor
 
Join Date: Dec 2011
Member # 205278
Location: Johnson City, TN
Posts: 439
JD Squared, Inc. MAD Series Cutting Tables

JD2 MAD Series Cutting Tables

Sizes: 4x4 - 4x8 - 5x10



MAD 4x4 - List $15,950 / Factory Direct $12,950
MAD 4x8 - List $18,950 / Factory Direct $15,950
MAD 5x10 - List $21,950 / Factory Direct $18,950




Features:
- Welded base is made of 3/16" steel plate construction.
- Base is supported by 4" x 3" x 1/4" wall steel legs with 30mm leveling pads.
- Adjustable slat height adjustment and slat configuration.
- Beams (Y-Beams) are made out of 4" x 3" Box tubing 1/4" wall and machined in a twist-neutral jig.
- 3/4", 16 pitch spur gear on the Y-Beam provides precise alignment.
- The spur gear is driven by a 10:1 high precision gear box.
- The Gear Box is driven by a USA made Brushless Servo Motor.
- Rapid speeds 1,000+ inches per minute.
- Rollers have an 8,900 lb. capacity with a dual-row radial ball bearing which carries the 300 lb. Y-Carriage and Gantry setup.
- The gantry is an Aluminum structure with precision machined weldments. Complex milling processes ensure that the gantry has perfect angles, flat surfaces, and holds the spur gear perfectly vertical.
- The Z-axis rides on a 25mm linear guide
- Magnetic break away to ensure the system powers off when the torch is disengaged.
- Switches provide Initial Height Testing and a Z-Homing Process to ensure accuracy.
- Computer included (Computer, Mouse, and Keyboard)
- Includes SheetCam


* Plasma Unit not Included with MAD Series Cutting Tables.

Please send a message or email Sales@JD2.com to get a shipping quote. Thanks!
__________________
Ryan Miles - Sales & Marketing
JD Squared, Inc.
Phone: (423) 979-0309

Made in the USA

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Last edited by JD Squared Inc; 02-08-2017 at 03:00 PM.
JD Squared Inc is offline   Reply With Quote Quick reply to this message
Old 06-23-2016, 10:04 AM   #2 (permalink)
P4x4 Vendor
 
Join Date: Dec 2011
Member # 205278
Location: Johnson City, TN
Posts: 439
Need a quote?

Send a PM, call 423-979-0309, or email sales@jd2.com.
__________________
Ryan Miles - Sales & Marketing
JD Squared, Inc.
Phone: (423) 979-0309

Made in the USA

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Last edited by JD Squared Inc; 02-01-2017 at 03:04 PM.
JD Squared Inc is offline   Reply With Quote Quick reply to this message
Sponsored Links
Old 06-28-2016, 08:09 AM   #3 (permalink)
P4x4 Vendor
 
Join Date: Dec 2011
Member # 205278
Location: Johnson City, TN
Posts: 439




Check out our website for more information!
https://jd2.com/p-114-mad-series-plasma-tables.aspx
__________________
Ryan Miles - Sales & Marketing
JD Squared, Inc.
Phone: (423) 979-0309

Made in the USA

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
JD Squared Inc is offline   Reply With Quote Quick reply to this message
 
Old 07-05-2016, 07:57 AM   #4 (permalink)
P4x4 Vendor
 
Join Date: Dec 2011
Member # 205278
Location: Johnson City, TN
Posts: 439
Need a quote?

Send a PM, call 423-979-0309, or email sales@jd2.com.
__________________
Ryan Miles - Sales & Marketing
JD Squared, Inc.
Phone: (423) 979-0309

Made in the USA

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
JD Squared Inc is offline   Reply With Quote Quick reply to this message
Old 07-13-2016, 09:40 AM   #5 (permalink)
Granite Guru
 
Join Date: Sep 2012
Member # 227992
Location: Chicago
Posts: 595
What are the cutting speeds?

And since you guys are new to the plasma cnc world, what do you offer that others don't to justify the higher price? I'm looking at an Arclight table that is a fair amount less expensive.
__________________
TorchMate 2x2
Hypertherm Powermax 45 with -Flashcut Controls. Vipercut 30
ViperMig 180
Razorweld 200ac/dc tig
Razorweld 195 Mig/stick
Razorweld & SSC Controls
Gamble is offline   Reply With Quote Quick reply to this message
Old 07-19-2016, 08:00 AM   #6 (permalink)
P4x4 Vendor
 
Join Date: Dec 2011
Member # 205278
Location: Johnson City, TN
Posts: 439
Quote:
Originally Posted by Gamble View Post
What are the cutting speeds?

And since you guys are new to the plasma cnc world, what do you offer that others don't to justify the higher price? I'm looking at an Arclight table that is a fair amount less expensive.
The cutting ipm will depend on the plasma unit and thickness of the plate. The rapids on the MAD series is just over 1,000 ipm.

We use very heavy construction for the base at 3/16" thickness plate. The machine has USA made Brushless Servo Motors that run through high precision gear boxes which allows us to get the accuracy needed. The gantry is a structure with precision machined weldments.

Not to mention we offer SigmaNEST Companion software with the machine that has a value of $4,950.

Are motion control board is made in house so if you ever did have any trouble we are the manufacturer of that.

These are just a couple of things our table offers.
__________________
Ryan Miles - Sales & Marketing
JD Squared, Inc.
Phone: (423) 979-0309

Made in the USA

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
JD Squared Inc is offline   Reply With Quote Quick reply to this message
Old 07-19-2016, 10:04 AM   #7 (permalink)
Granite Guru
 
Join Date: Sep 2012
Member # 227992
Location: Chicago
Posts: 595
Whats the discount if purchased without software? I have software that works perfect for me
__________________
TorchMate 2x2
Hypertherm Powermax 45 with -Flashcut Controls. Vipercut 30
ViperMig 180
Razorweld 200ac/dc tig
Razorweld 195 Mig/stick
Razorweld & SSC Controls
Gamble is offline   Reply With Quote Quick reply to this message
Old 07-20-2016, 10:23 AM   #8 (permalink)
P4x4 Vendor
 
Join Date: Dec 2011
Member # 205278
Location: Johnson City, TN
Posts: 439
Quote:
Originally Posted by Gamble View Post
Whats the discount if purchased without software? I have software that works perfect for me
We don't offer any discounts because everything is sold as a package right now. The value of the SigmaNEST is approx. $4950 and is installed on every computer we ship out.
__________________
Ryan Miles - Sales & Marketing
JD Squared, Inc.
Phone: (423) 979-0309

Made in the USA

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
JD Squared Inc is offline   Reply With Quote Quick reply to this message
Old 07-21-2016, 02:55 PM   #9 (permalink)
P4x4 Vendor
 
Join Date: Dec 2011
Member # 205278
Location: Johnson City, TN
Posts: 439
__________________
Ryan Miles - Sales & Marketing
JD Squared, Inc.
Phone: (423) 979-0309

Made in the USA

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
JD Squared Inc is offline   Reply With Quote Quick reply to this message
Old 08-10-2016, 08:23 AM   #10 (permalink)
P4x4 Vendor
 
Join Date: Dec 2011
Member # 205278
Location: Johnson City, TN
Posts: 439
Need a quote?

Send a PM, call 423-979-0309, or email sales@jd2.com.
__________________
Ryan Miles - Sales & Marketing
JD Squared, Inc.
Phone: (423) 979-0309

Made in the USA

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
JD Squared Inc is offline   Reply With Quote Quick reply to this message
Old 08-17-2016, 07:37 AM   #11 (permalink)
P4x4 Vendor
 
Join Date: Dec 2011
Member # 205278
Location: Johnson City, TN
Posts: 439
MAD Series Plasma Table Video


__________________
Ryan Miles - Sales & Marketing
JD Squared, Inc.
Phone: (423) 979-0309

Made in the USA

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
JD Squared Inc is offline   Reply With Quote Quick reply to this message
Old 08-30-2016, 07:58 AM   #12 (permalink)
P4x4 Vendor
 
Join Date: Dec 2011
Member # 205278
Location: Johnson City, TN
Posts: 439
MAD 4x4 - List $15,950 / Factory Direct $12,950
MAD 4x8 - List $18,950 / Factory Direct $15,950
MAD 5x10 - List $21,950 / Factory Direct $18,950

Down-Draft Air Box - $200 each



Features:
- Welded base is made of 3/16" steel plate construction.
- Base is supported by 4" x 3" x 1/4" wall steel legs with 30mm leveling pads.
- Adjustable slat height adjustment and slat configuration.
- Beams (Y-Beams) are made out of 4" x 3" Box tubing 1/4" wall and machined in a twist-neutral jig.
- 3/4", 16 pitch spur gear on the Y-Beam provides precise alignment.
- The spur gear is driven by a 10:1 high precision gear box.
- The Gear Box is driven by a USA made Brushless Servo Motor.
- Rapid speeds 1,000+ inches per minute.
- Rollers have an 8,900 lb. capacity with a dual-row radial ball bearing which carries the 300 lb. Y-Carriage and Gantry setup.
- The gantry is an Aluminum structure with precision machined weldments. Complex milling processes ensure that the gantry has perfect angles, flat surfaces, and holds the spur gear perfectly vertical.
- The Z-axis rides on a 25mm linear guide
- Magnetic break away to ensure the system powers off when the torch is disengaged.
- Switches provide Initial Height Testing and a Z-Homing Process to ensure accuracy.
- Computer included (Computer, Mouse, and Keyboard)
- Currently includes SigmaNEST Companion Software which includes automatic TrueShape nesting, optimized tool-path generation, and built in CAD tools. http://oem.sigmanest.com/Content/Companion.PDF
- Table ships fully assembled and tested.

* Available Down Draft Box that attaches to the base. (additional charge)
* Plasma Unit not Included with MAD Series Cutting Tables.

Please send a message or email Sales@JD2.com to get a shipping quote. Thanks!
__________________
Ryan Miles - Sales & Marketing
JD Squared, Inc.
Phone: (423) 979-0309

Made in the USA

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
JD Squared Inc is offline   Reply With Quote Quick reply to this message
Old 10-20-2016, 03:34 PM   #13 (permalink)
P4x4 Vendor
 
Join Date: Dec 2011
Member # 205278
Location: Johnson City, TN
Posts: 439
Need a quote?

Send a PM, call 423-979-0309, or email sales@jd2.com.
__________________
Ryan Miles - Sales & Marketing
JD Squared, Inc.
Phone: (423) 979-0309

Made in the USA

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
JD Squared Inc is offline   Reply With Quote Quick reply to this message
Old 11-02-2016, 04:04 PM   #14 (permalink)
P4x4 Vendor
 
Join Date: Dec 2011
Member # 205278
Location: Johnson City, TN
Posts: 439
MAD Series 5x10 plasma table shipping out to its new owner.

__________________
Ryan Miles - Sales & Marketing
JD Squared, Inc.
Phone: (423) 979-0309

Made in the USA

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
JD Squared Inc is offline   Reply With Quote Quick reply to this message
Old 11-10-2016, 03:13 PM   #15 (permalink)
P4x4 Vendor
 
Join Date: Dec 2011
Member # 205278
Location: Johnson City, TN
Posts: 439
Need a quote?

Send a PM, call 423-979-0309, or email sales@jd2.com.
__________________
Ryan Miles - Sales & Marketing
JD Squared, Inc.
Phone: (423) 979-0309

Made in the USA

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
JD Squared Inc is offline   Reply With Quote Quick reply to this message
Old 01-11-2017, 04:08 PM   #16 (permalink)
P4x4 Vendor
 
Join Date: Dec 2011
Member # 205278
Location: Johnson City, TN
Posts: 439
Need a quote?

Send a PM, call 423-979-0309, or email sales@jd2.com.
__________________
Ryan Miles - Sales & Marketing
JD Squared, Inc.
Phone: (423) 979-0309

Made in the USA

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
JD Squared Inc is offline   Reply With Quote Quick reply to this message
Old 01-16-2017, 03:32 PM   #17 (permalink)
P4x4 Vendor
 
Join Date: Dec 2011
Member # 205278
Location: Johnson City, TN
Posts: 439
__________________
Ryan Miles - Sales & Marketing
JD Squared, Inc.
Phone: (423) 979-0309

Made in the USA

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
JD Squared Inc is offline   Reply With Quote Quick reply to this message
Old 01-18-2017, 04:58 PM   #18 (permalink)
P4x4 Vendor
 
Join Date: Dec 2011
Member # 205278
Location: Johnson City, TN
Posts: 439
MAD Series test cut on 3/8" plate cut at 65 amps.

__________________
Ryan Miles - Sales & Marketing
JD Squared, Inc.
Phone: (423) 979-0309

Made in the USA

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
JD Squared Inc is offline   Reply With Quote Quick reply to this message
Old 01-23-2017, 02:27 PM   #19 (permalink)
P4x4 Vendor
 
Join Date: Dec 2011
Member # 205278
Location: Johnson City, TN
Posts: 439
We have been doing some test cutting on 1/4" Aluminum using both Air and Nitrogen.

JD Squared, Inc. - MAD Series Plasma Tables

__________________
Ryan Miles - Sales & Marketing
JD Squared, Inc.
Phone: (423) 979-0309

Made in the USA

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
JD Squared Inc is offline   Reply With Quote Quick reply to this message
Old 01-24-2017, 07:12 AM   #20 (permalink)
Granite Guru
 
Join Date: Sep 2012
Member # 227992
Location: Chicago
Posts: 595
Interesting
Care to share the setting ?
__________________
TorchMate 2x2
Hypertherm Powermax 45 with -Flashcut Controls. Vipercut 30
ViperMig 180
Razorweld 200ac/dc tig
Razorweld 195 Mig/stick
Razorweld & SSC Controls
Gamble is offline   Reply With Quote Quick reply to this message
Old 01-24-2017, 02:41 PM   #21 (permalink)
P4x4 Vendor
 
Join Date: Dec 2011
Member # 205278
Location: Johnson City, TN
Posts: 439
Quote:
Originally Posted by Gamble View Post
Interesting
Care to share the setting ?
We did the same settings for the air cuts and nitrogen cuts in testing. Here is some information on the settings.

MAD Series CNC Plasma Table
Hypertherm Powermax 85
1/4" Aluminum

45A / 54 IPM / 142v

65A / 105 IPM / 131v
__________________
Ryan Miles - Sales & Marketing
JD Squared, Inc.
Phone: (423) 979-0309

Made in the USA

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
JD Squared Inc is offline   Reply With Quote Quick reply to this message
Old 01-24-2017, 04:53 PM   #22 (permalink)
Granite Guru
 
Join Date: Sep 2012
Member # 227992
Location: Chicago
Posts: 595
That's a lot of voltage
__________________
TorchMate 2x2
Hypertherm Powermax 45 with -Flashcut Controls. Vipercut 30
ViperMig 180
Razorweld 200ac/dc tig
Razorweld 195 Mig/stick
Razorweld & SSC Controls
Gamble is offline   Reply With Quote Quick reply to this message
Old 01-30-2017, 02:43 PM   #23 (permalink)
Registered User
 
Join Date: Nov 2005
Member # 59172
Location: MO, USA
Posts: 29
Quote:
Originally Posted by Gamble View Post
That's a lot of voltage
Book specs for my PM85 for 1/4" AL.
motoguy is offline   Reply With Quote Quick reply to this message
Old 01-31-2017, 01:55 PM   #24 (permalink)
P4x4 Vendor
 
Join Date: Dec 2011
Member # 205278
Location: Johnson City, TN
Posts: 439
Quote:
Originally Posted by motoguy View Post
Book specs for my PM85 for 1/4" AL.
That is correct.
__________________
Ryan Miles - Sales & Marketing
JD Squared, Inc.
Phone: (423) 979-0309

Made in the USA

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
JD Squared Inc is offline   Reply With Quote Quick reply to this message
Old 02-01-2017, 03:04 PM   #25 (permalink)
P4x4 Vendor
 
Join Date: Dec 2011
Member # 205278
Location: Johnson City, TN
Posts: 439
Need a quote?

Send a PM, call 423-979-0309, or email sales@jd2.com.
__________________
Ryan Miles - Sales & Marketing
JD Squared, Inc.
Phone: (423) 979-0309

Made in the USA

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
JD Squared Inc is offline   Reply With Quote Quick reply to this message
Reply

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the Pirate4x4.Com : 4x4 and Off-Road Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.

** A VERIFICATION EMAIL IS SENT TO THIS ADDRESS TO COMPLETE REGISTRATION!! **

Email Address:
Insurance
Please select your insurance company (Optional)

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -7. The time now is 06:15 PM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 ©2011, Crawlability, Inc.
User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.