Looking at thei cherokee, opinions? - Pirate4x4.Com : 4x4 and Off-Road Forum

qwerty11 · 07-09-2007, 10:37 PM

Jeep Info

Front and Rear Dana 60 Geared 5:13's With Detroit up front and lockright in the rear and rear disc brakes.
Front 60 is from a 79 ford, it has been on 2 rides and was completely rebuilt with dedenbear knuckles springless high steer arms, new bearings and seals, and Tera Flex lockouts. 4,500.00 in front 60
PSC Front double ended steering ram, with new oem power steering pump and a eaton steering control valve. I installed a tranny cooler to help keep the temps down and add more fluid capacity.
Engine has less than 119,000 miles runs good, tranny shifts good as well
Rusty's 8-9" Lift. I also have nearly all the parts to 4 link the rear. All I need is the springs, and spring buckets.
Transfercase is stock but has the slip yoke kit.
39.5 Iroks on 17" allied beadlocks. Only 6 rides on these tires and wheels.
4 point harnesses and waterproof seat covers.
Open Radiator with bypass switch for the electric fan
TNT Front bumper My custom rear bumper and a full exo cage tied to the unibody at 10 points which are plated for strength.
A few spare parts, High Lift 60 or 62" Jack, warn 8,000lb winch, d-rings 2 front 2 rear. CB Radio.

I am sure there is much more. I have a lot invested, but need this gone due to selling house and buying some property.

8,000.00 for the jeep 1,300.00 for the trailer. Trades welcome, let me know what you have.

HardcorewannabeXJ · 07-10-2007, 08:21 AM

Looks pretty sweet. The exo is a little on the rainbow side but that can be hacked off and redone

Any unibody stiffeners?

87manche · 07-10-2007, 02:07 PM

does this look like the for sale forum?

HardcorewannabeXJ · 07-10-2007, 02:39 PM

Quote:

Originally Posted by 87manche

does this look like the for sale forum?

I think he is asking if it's a good deal or not.

qwerty11 · 07-10-2007, 05:33 PM

You are right!

Quote:

Originally Posted by HardcorewannabeXJ

I think he is asking if it's a good deal or not.

BadAssXJ · 07-10-2007, 05:41 PM

Quote:

Originally Posted by qwerty11

You are right!

Still wrong forum, I dont see any tech here.

Honestly I think this is a way for someone else to have a NEW ID sign up and PIMP his POS for sale in this forum.

The Rockslut · 07-10-2007, 07:44 PM

Seems like a decent price. The exo is rainbow though.

I am looking at selling my 95 XJ that is very similar, just newer and higher output engine, better lockers and transfer case.

XJ4THEKICKIN · 07-10-2007, 08:21 PM

I know the owner and bought his old HP d44 a few months back. The front d60 is only a few months old.

He did want alot more than $8k for it and honestly I'd buy it for that just for the axles/wheels tires and sell the rest haha. Of course I already got a newer XJ and thats why.

ashmanjeepXJ · 07-10-2007, 08:39 PM

Quote:

Originally Posted by XJ4THEKICKIN

I know the owner and bought his old HP d44 a few months back. The front d60 is only a few months old.

He did want alot more than $8k for it and honestly I'd buy it for that just for the axles/wheels tires and sell the rest haha. Of course I already got a newer XJ and thats why.

That picture has your d44

The picture is not as described. The pic is not a double ended ram, looks like a d44...

Still needs a t-case, they rest a swazall can fix.

qwerty11 · 07-10-2007, 08:50 PM

how about this one?

HardcorewannabeXJ · 07-10-2007, 10:54 PM

Cage is definetly pretty bad.

Qwerty do you live in reno?

redline61 · 07-14-2007, 11:50 PM

Cage aside, that is a sweat Cherokee. I think it would be money well spent if you wanted to bypass the wholle build process.

XJ4THEKICKIN · 07-15-2007, 10:08 AM

Shiii he's parting it out now, $4k for both built d60s.

HardcorewannabeXJ · 07-15-2007, 02:13 PM

Quote:

Originally Posted by XJ4THEKICKIN

Shiii he's parting it out now, $4k for both built d60s.

Well, I wouldn't drop 4g on them if you could do the mounts yourself. I'm at $4150 for my HPD60 With ARB 5.38's MM hubs installed, and sterling 10.5" ARB 5.38's installed. I think junkyard axles are the way to go and buy all the parts yourself. But I still gotta fab mounts so they aren't technically complete

XJ4THEKICKIN · 07-16-2007, 06:19 PM

Quote:

Originally Posted by HardcorewannabeXJ

Well, I wouldn't drop 4g on them if you could do the mounts yourself. I'm at $4150 for my HPD60 With ARB 5.38's MM hubs installed, and sterling 10.5" ARB 5.38's installed. I think junkyard axles are the way to go and buy all the parts yourself. But I still gotta fab mounts so they aren't technically complete

You got chromo axles,OX joints and high-steer too? I'd buy his axles in a heartbeat for $4k, but the rig is sold.

I am looking at buying a HP d60 and it looks like $5700-$7500 lol. You can't byuild what he has by yourself for what you're saying. I built a HP d44 myself and it was $3750 and change.

heepr · 07-16-2007, 09:49 PM

If I'm not mistaken he was at the Shamrock ride at MMORV in March. I watched him on a few trails and the rig did OK. Nothing to write home about but nothing broke and no winch cable came out.

07-09-2007, 10:37 PM	#1 (permalink)
qwerty11 Registered User Join Date: Jul 2007 Member # 94958 Posts: 11	Looking at this cherokee, opinions? Jeep Info Front and Rear Dana 60 Geared 5:13's With Detroit up front and lockright in the rear and rear disc brakes. Front 60 is from a 79 ford, it has been on 2 rides and was completely rebuilt with dedenbear knuckles springless high steer arms, new bearings and seals, and Tera Flex lockouts. 4,500.00 in front 60 PSC Front double ended steering ram, with new oem power steering pump and a eaton steering control valve. I installed a tranny cooler to help keep the temps down and add more fluid capacity. Engine has less than 119,000 miles runs good, tranny shifts good as well Rusty's 8-9" Lift. I also have nearly all the parts to 4 link the rear. All I need is the springs, and spring buckets. Transfercase is stock but has the slip yoke kit. 39.5 Iroks on 17" allied beadlocks. Only 6 rides on these tires and wheels. 4 point harnesses and waterproof seat covers. Open Radiator with bypass switch for the electric fan TNT Front bumper My custom rear bumper and a full exo cage tied to the unibody at 10 points which are plated for strength. A few spare parts, High Lift 60 or 62" Jack, warn 8,000lb winch, d-rings 2 front 2 rear. CB Radio. I am sure there is much more. I have a lot invested, but need this gone due to selling house and buying some property. 8,000.00 for the jeep 1,300.00 for the trailer. Trades welcome, let me know what you have. Last edited by qwerty11; 07-10-2007 at 12:50 PM.

07-10-2007, 07:44 PM	#7 (permalink)
The Rockslut Registered User Join Date: Jun 2001 Member # 5021 Location: Lincoln, CA Posts: 5,967	Seems like a decent price. The exo is rainbow though. I am looking at selling my 95 XJ that is very similar, just newer and higher output engine, better lockers and transfer case. __________________ Don't be "THAT GUY" on the trail. www.voodoowax.com

07-10-2007, 08:21 PM	#8 (permalink)
XJ4THEKICKIN Registered User Join Date: Oct 2003 Member # 23829 Location: Alabama and Texass Posts: 728	I know the owner and bought his old HP d44 a few months back. The front d60 is only a few months old. He did want alot more than $8k for it and honestly I'd buy it for that just for the axles/wheels tires and sell the rest haha. Of course I already got a newer XJ and thats why. Last edited by XJ4THEKICKIN; 07-10-2007 at 08:22 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-10-2007, 08:21 AM	#2 (permalink)
HardcorewannabeXJ Registered User Join Date: Jan 2007 Member # 84593 Location: Reno, NV Posts: 3,004	Looks pretty sweet. The exo is a little on the rainbow side but that can be hacked off and redone Any unibody stiffeners?

07-10-2007, 02:07 PM	#3 (permalink)
87manche Registered User Join Date: Feb 2007 Member # 86724 Posts: 4,652	does this look like the for sale forum?

07-10-2007, 08:50 PM	#10 (permalink)
qwerty11 Registered User Join Date: Jul 2007 Member # 94958 Posts: 11	how about this one?

07-10-2007, 10:54 PM	#11 (permalink)
HardcorewannabeXJ Registered User Join Date: Jan 2007 Member # 84593 Location: Reno, NV Posts: 3,004	Cage is definetly pretty bad. Qwerty do you live in reno?

07-14-2007, 11:50 PM	#12 (permalink)
redline61 Registered User Join Date: Jun 2007 Member # 93071 Location: CDA, Idaho Posts: 223	Cage aside, that is a sweat Cherokee. I think it would be money well spent if you wanted to bypass the wholle build process.

07-15-2007, 10:08 AM	#13 (permalink)
XJ4THEKICKIN Registered User Join Date: Oct 2003 Member # 23829 Location: Alabama and Texass Posts: 728	Shiii he's parting it out now, $4k for both built d60s.

07-16-2007, 09:49 PM	#16 (permalink)
heepr Registered User Join Date: Jan 2004 Member # 26806 Location: atlanta Posts: 771	If I'm not mistaken he was at the Shamrock ride at MMORV in March. I watched him on a few trails and the rig did OK. Nothing to write home about but nothing broke and no winch cable came out.