Case spreader and axle seal press - Pirate4x4.Com : 4x4 and Off-Road Forum

KVOM · 02-24-2012, 07:32 PM

Thought someone might like to see how we got the Detroit out to replace the seals on the Rockcrusher D60:

Normal spreader has problems attaching because of the truss and bracket, so it was time to fab something.

The seal press was made to do both D60 and D40 seals.

EricsGreen98Tj · 02-24-2012, 07:50 PM

Did the same thing with my E-locker install....Redneck engineered!

Although I will and do give you props on the seal seater..

I used 4 tent poles and the end off a rubber mallet.

02-24-2012, 07:32 PM	#1 (permalink)
KVOM Wheeler Join Date: Oct 2004 Member # 36715 Location: Cumming, GA Posts: 258	Case spreader and axle seal press Thought someone might like to see how we got the Detroit out to replace the seals on the Rockcrusher D60: Normal spreader has problems attaching because of the truss and bracket, so it was time to fab something. The seal press was made to do both D60 and D40 seals. __________________ 97 TJ Buggy 2002 Ford F350 7.3PSD CC LB

02-24-2012, 07:50 PM	#2 (permalink)
EricsGreen98Tj Registered User Join Date: Apr 2011 Member # 187456 Location: Elkins WV Posts: 771	Did the same thing with my E-locker install....Redneck engineered! Although I will and do give you props on the seal seater.. I used 4 tent poles and the end off a rubber mallet. __________________ [QUOTE=bigford;10609690]On a side note: I remember telling my second ex wife " My truck comes first, then my job, then you " I never liked that woman. [/QUOTE]

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode