jcwhitney CJ springs - Pirate4x4.Com : 4x4 and Off-Road Forum

redrock4x4 · 02-01-2002, 04:45 PM

Yeah I'm a newbie (as far as post count) so bring it if you must. . .

Lurking on the board for 6+months. For those that have the jcwhitney hd CJ springs on all four corners-They still working as well as anticipated. Any problems yet, ie. sagging, too stiff, etc. Thought I would check before I ordered.

Thanks

66CJdean · 02-01-2002, 06:04 PM

I don't run the CJ springs but the springs I got from them are working great.

High5 · 02-01-2002, 06:37 PM

i run the jc whitney 7leaf hd springs for the rear of a cj at all 4 corners and they have been great. they flex good and don't sag like other springs i have used in the past.

Steve N · 02-01-2002, 07:05 PM

They work good I haven't had any complaints yet. I sell the same ones.

ledjer · 03-07-2002, 07:14 PM

Quote:

Originally posted by high5
i run the jc whitney 7leaf hd springs for the rear of a cj at all 4 corners and they have been great. they flex good and don't sag like other springs i have used in the past.

Did you leave the flat leaf on the pack or remove it?

High5 · 03-07-2002, 08:06 PM

i took the overload leaf out in the begining but the front springs were wrapping a bit so i put them back in the front springs. i run an anti wrap bar in the rear so i didn't need to run them in the rear.

LAME · 03-08-2002, 06:05 AM

Knorr has been running them up front for a few years...60, and 38" SX's, and a heavy right foot, seem to work good.

02-01-2002, 04:45 PM	#1 (permalink)
redrock4x4 Registered User Join Date: Feb 2002 Member # 9683 Location: Salt Lake City, UT Posts: 18	jcwhitney CJ springs Yeah I'm a newbie (as far as post count) so bring it if you must. . . Lurking on the board for 6+months. For those that have the jcwhitney hd CJ springs on all four corners-They still working as well as anticipated. Any problems yet, ie. sagging, too stiff, etc. Thought I would check before I ordered. Thanks __________________ Yep

02-01-2002, 06:04 PM	#2 (permalink)
66CJdean Pirate4x4 Addict! Join Date: May 2000 Member # 940 Location: Lincoln, Ca Posts: 6,401	I don't run the CJ springs but the springs I got from them are working great. __________________ WWW.PCRYO.COM Deep Cryogenic Tempering Service Find all my products at www.KICKASSOFFROAD.COM 916-434-6978 Custom Axles built to order. Got 40 spline? I have the hubs, spindles, and axles you need to kickass! Custom Hummer wheels and centers Axle Resplining

02-01-2002, 06:37 PM	#3 (permalink)
High5 Registered User Join Date: Sep 2000 Member # 1700 Location: TEXAS Posts: 4,308	i run the jc whitney 7leaf hd springs for the rear of a cj at all 4 corners and they have been great. they flex good and don't sag like other springs i have used in the past. __________________ High5 IT'S 1TON O' FUN!

02-01-2002, 07:05 PM	#4 (permalink)
Steve N Registered User Join Date: Feb 2000 Member # 112 Location: Pleasant Hill CA Posts: 9,166	They work good I haven't had any complaints yet. I sell the same ones. __________________ [COLOR=yellow]it's all about show & shine[/COLOR] [COLOR=Lime] Stiffy®? why screw around with anything less? [/COLOR] Charter member PBB mod divorce club for men.

03-07-2002, 08:06 PM	#6 (permalink)
High5 Registered User Join Date: Sep 2000 Member # 1700 Location: TEXAS Posts: 4,308	i took the overload leaf out in the begining but the front springs were wrapping a bit so i put them back in the front springs. i run an anti wrap bar in the rear so i didn't need to run them in the rear. __________________ High5 IT'S 1TON O' FUN!

03-08-2002, 06:05 AM	#7 (permalink)
LAME Registered User Join Date: Jul 2001 Member # 5960 Location: Lots of lakes Posts: 8,463	Knorr has been running them up front for a few years...60, and 38" SX's, and a heavy right foot, seem to work good. __________________ crawl4cure.org Rock Rash Racing #613, Trail Tampon Spotter

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode