Rube-Adapter Transmission/ Transfer Case Adapter - Pirate4x4.Com : 4x4 and Off-Road Forum

rattman · 07-15-2005, 10:30 PM

Purchased an adapter from a company called Rube-adapter Off-Road Center to go from my turbo 400 to dana 300 in my '78 CJ about a year ago. And let me tell you, I have hammered this Jeep every weekend without any problems at all.
The adapter was specifically made for this type of abuse and installation was a breeze. Was also about $100 cheaper than anyone else. The biggest thing for me was that it is a steel adapter. None of this cast crap. With as well as this has worked, I think the Jeep could be blown to pieces and the adapter would be intact.
I was tired of reading nothing but bad things on different companies and their products, I figured I would give credit where credit is do. This company has done me right.
Anyone out there thinking about doing transmission/transfer case conversions should look these guys up.
www.rube-adapter.com

LilRocky · 07-15-2005, 10:36 PM

Beat it, spammer.
Do you really think someone is going to fall for a lame troll like that?
Get a yellow star, or get the hell out.

LilRocky · 07-15-2005, 10:38 PM

(Post reported.)

rattman · 07-16-2005, 09:34 AM

Hey LilRocky,

Anger Management!

coolcat · 07-17-2005, 12:11 PM

I bought a RUBE-ADAPTER a few months ago for my Flat Fender. I have an SM-420 to Dana 18 and it works great.

doomdog666 · 07-17-2005, 09:55 PM

hmmmm, ive seen rubes, but isn't it a bit longer than for example novaks new adapter? i want the novaks because it is only one inch thick and is clockable. i'm glad that i stretched im rear 5.5 inches cuz with rubes adapter, my 400 and 300 combo with my nine rear, it would not be pleasant.

07-15-2005, 10:30 PM	#1 (permalink)
rattman Registered User Join Date: Jul 2005 Member # 50481 Posts: 4	Rube-Adapter Transmission/ Transfer Case Adapter Purchased an adapter from a company called Rube-adapter Off-Road Center to go from my turbo 400 to dana 300 in my '78 CJ about a year ago. And let me tell you, I have hammered this Jeep every weekend without any problems at all. The adapter was specifically made for this type of abuse and installation was a breeze. Was also about $100 cheaper than anyone else. The biggest thing for me was that it is a steel adapter. None of this cast crap. With as well as this has worked, I think the Jeep could be blown to pieces and the adapter would be intact. I was tired of reading nothing but bad things on different companies and their products, I figured I would give credit where credit is do. This company has done me right. Anyone out there thinking about doing transmission/transfer case conversions should look these guys up. www.rube-adapter.com

07-17-2005, 12:11 PM	#5 (permalink)
coolcat Registered User Join Date: Jul 2005 Member # 50509 Posts: 1	Rube-adapter I bought a RUBE-ADAPTER a few months ago for my Flat Fender. I have an SM-420 to Dana 18 and it works great.

07-17-2005, 09:55 PM	#6 (permalink)
doomdog666 Registered User Join Date: Jan 2004 Member # 26563 Location: montrose co Posts: 71	hmmmm, ive seen rubes, but isn't it a bit longer than for example novaks new adapter? i want the novaks because it is only one inch thick and is clockable. i'm glad that i stretched im rear 5.5 inches cuz with rubes adapter, my 400 and 300 combo with my nine rear, it would not be pleasant. __________________ devil made me do it.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-15-2005, 10:36 PM	#2 (permalink)
LilRocky Registered User Join Date: Mar 2004 Member # 28566 Posts: 671	Beat it, spammer. Do you really think someone is going to fall for a lame troll like that? Get a yellow star, or get the hell out.

07-15-2005, 10:38 PM	#3 (permalink)
LilRocky Registered User Join Date: Mar 2004 Member # 28566 Posts: 671	(Post reported.)

07-16-2005, 09:34 AM	#4 (permalink)
rattman Registered User Join Date: Jul 2005 Member # 50481 Posts: 4	Hey LilRocky, Anger Management!