|08-17-2006, 06:59 PM||#1 (permalink)|
Join Date: Apr 2005
Member # 46522
4 link design
i've been tryin to use the 4-link calculater to figure out the design for the front 4-link in my willys, but am not sure what i should shoot for in the way of anti- dive, roll center... and so on.
i had to kinda work backwards in order to make the calculater work for the front, and im now at like 97% anti dive(front)_RC slope=.0728 in/in_ RCheight=24.5in_RC angle=4.2* (oversteer)_instant center axis=107in.....
its a 86 in wheelbase, on 37s with about 5in of lift
am i any where near the ball park?
help is greatly appreciated..
flat fenders rule
*1949 willys, 1975 bronco*
Last edited by wildcj3a; 08-17-2006 at 06:59 PM.