Rubi Rear D44 Build Up! - Pirate4x4.Com : 4x4 and Off-Road Forum

YellowJeep39157 · 11-12-2005, 10:44 AM

Ok..It seems that JeepForum.com or JeepsUnlimited.com is not HardCore enough for me now. But anyways...I have done my SEARCH option and now I have a few questions. I am Building up a Rubi D44 to Replace my D35 Turd. In this build up it will include the following:

Rubicon Rear D44 Housing
ARB D44 30 Spline
D44 Alloy USA Shafts
Heavy Duty U-bolt Yoke

My question is about Disc Brake...I dont want to rig up a Rear Disc mount or anything...Just want something that will bolt up without welding. No Chevy Calipers, Caddy Calipers, Ford Calipers and Zurks Calipers. I just want to use the stock Mount and Calipers from Mopar. If anybody have the Part# and items I need Plz post it. Also is there a write up on it? Oh..yea..I know there is alot of Flaming goes around here and my feeling will not be hurt if I get Flamed.

Thanks
Anthony

bowtied_micky · 11-12-2005, 01:50 PM

Anthony -

Posts like that belong in the newbie section. What you have is a brake question, and this is area is for the sick fuckers that like to stand their rigs on the front end and where a d60 in the front is seen as adequate. you are begging for a torch job

micky

desertsport · 11-12-2005, 01:55 PM

Why do you want to use stock mounts and calipers from mopar?

Weasel · 11-12-2005, 02:29 PM

moooooooooooooo! this isn't hardcore.

chris demartini · 11-12-2005, 02:37 PM

go to the jeep dealer and spec out the fawking parts

newb tech get this out of here

frostytj · 11-12-2005, 02:51 PM

You havent searched hard enough then. Google d44 disc brake conversion. You will find all the part numbers you need.

krazeemofo · 11-12-2005, 03:27 PM

Don't waste your money just do a 60 now dumbass.

UglyZJ · 11-12-2005, 03:39 PM

I though rubi's had 4 wheel disc, so if your talking about just getting better rotors, go to a parts store

CrustyJeep · 11-12-2005, 04:00 PM

Quote:

Originally Posted by YellowJeep39157

I dont want to rig up a Rear Disc mount or anything...Just want something that will bolt up without welding. No Chevy Calipers, Caddy Calipers, Ford Calipers and Zurks Calipers. I just want to use the stock Mount and Calipers from Mopar.

Bzzzzzt not hardcore. Welcome to PBB. Please move this to newb.

Quote:

Originally Posted by YellowJeep39157

Ok..It seems that JeepForum.com or JeepsUnlimited.com is not HardCore enough for me now.

I disagree

kirbyiv · 11-12-2005, 05:47 PM

damn I think the PBB is gettin worse than JU. What the hell

NE-RokToy · 11-12-2005, 05:49 PM

swapiing in an axle with some bolts that just bolts in place is definatly not hardcore. Go to the dealer and get the parts, do not pass go do not collect $200

DOAOFFROAD · 11-12-2005, 07:26 PM

Should have bought mine. It already has discs.

JeffsJeep04 · 11-12-2005, 07:36 PM

Quote:

Originally Posted by UglyZJ

I though rubi's had 4 wheel disc...

So did I. If not, you want ZJ parts. Go to the jeep dealership, touch your toes, and pray the parts manager is feeling gentle that day.

roundeye · 11-13-2005, 12:59 AM

Give us a jingle and we can get you the Alloy USA rear shafts. We even have them in stock. You're in the right section. Newb's ask shit like do I have brakes in the rear or not?

tweba99 · 11-15-2005, 08:19 AM

You made a mistake posting this here Anthony....
Since you got a bare Rubi housing though, you can just get the stock Rubi disc brakes with brackets for your housing. Cheapest I have found besides that is the Tera Disc Conversion.

jaybirdd · 11-15-2005, 09:21 AM

a rubi 44 housing is as junk as a 35! same tube thickness and bending strength! get a 60 now, don't throw money away!

Redmist · 11-16-2005, 08:46 AM

I will sell you my rear rubi axle so I can go to a 60.

It even has disk brakes!!!

And I will leave them bolted on!

Come on you know you want it.............

Steve N · 11-16-2005, 10:19 AM

11-12-2005, 10:44 AM	#1 (permalink)
YellowJeep39157 Registered User Join Date: Nov 2005 Member # 56678 Posts: 414	Rubi Rear D44 Build Up! Ok..It seems that JeepForum.com or JeepsUnlimited.com is not HardCore enough for me now. But anyways...I have done my SEARCH option and now I have a few questions. I am Building up a Rubi D44 to Replace my D35 Turd. In this build up it will include the following: Rubicon Rear D44 Housing ARB D44 30 Spline D44 Alloy USA Shafts Heavy Duty U-bolt Yoke My question is about Disc Brake...I dont want to rig up a Rear Disc mount or anything...Just want something that will bolt up without welding. No Chevy Calipers, Caddy Calipers, Ford Calipers and Zurks Calipers. I just want to use the stock Mount and Calipers from Mopar. If anybody have the Part# and items I need Plz post it. Also is there a write up on it? Oh..yea..I know there is alot of Flaming goes around here and my feeling will not be hurt if I get Flamed. Thanks Anthony

11-12-2005, 01:55 PM	#3 (permalink)
desertsport Registered User Join Date: Dec 2004 Member # 39627 Location: Pirate4x4 Posts: 505	Why do you want to use stock mounts and calipers from mopar? __________________ 35 MTR'S, ALLOY SHAFTS, ARB FRONT AND REAR,4.56

11-12-2005, 02:29 PM	#4 (permalink)
Weasel Pirate4x4 Addict! Join Date: Jul 2001 Member # 5639 Location: Rapid City, SD Posts: 5,991	moooooooooooooo! this isn't hardcore. __________________ Just Add Lightness I'd rather be simple-and-wrong than complicated-and-wrong.

11-12-2005, 03:39 PM	#8 (permalink)
UglyZJ Registered User Join Date: Mar 2005 Member # 45364 Location: Marietta, GA Posts: 158	I though rubi's had 4 wheel disc, so if your talking about just getting better rotors, go to a parts store __________________ 8 lug ZJ

11-12-2005, 05:47 PM	#10 (permalink)
kirbyiv K^2 Join Date: Jun 2005 Member # 49704 Location: Cincinnasti, OH Posts: 2,426	damn I think the PBB is gettin worse than JU. What the hell __________________ Walle Crawler /forum/general-4x4-discussion/1038946-project-walle-crawler.html Benz Buggy http://pirate4x4.com/forum/showthread.php?t=877869 Slinky Blue Ballz /forum/jeep-hardcore-tech/551947-project-slinky-blue-ballz.html

11-12-2005, 01:50 PM	#2 (permalink)
bowtied_micky Registered User Join Date: Aug 2005 Member # 52752 Location: The Ohio State Posts: 639	Anthony - Posts like that belong in the newbie section. What you have is a brake question, and this is area is for the sick fuckers that like to stand their rigs on the front end and where a d60 in the front is seen as adequate. you are begging for a torch job micky

11-12-2005, 02:37 PM	#5 (permalink)
chris demartini Registered User Join Date: Sep 2000 Member # 1636 Location: 201 NJ Posts: 5,735	go to the jeep dealer and spec out the fawking parts newb tech get this out of here

11-12-2005, 03:27 PM	#7 (permalink)
krazeemofo Registered User Join Date: Apr 2005 Member # 45490 Location: Retirement villa Posts: 446	Don't waste your money just do a 60 now dumbass.

11-12-2005, 05:49 PM	#11 (permalink)
NE-RokToy Registered User Join Date: Feb 2000 Member # 62 Location: Omaha NE Posts: 5,992	swapiing in an axle with some bolts that just bolts in place is definatly not hardcore. Go to the dealer and get the parts, do not pass go do not collect $200 __________________ Jeff Neves

11-12-2005, 07:26 PM	#12 (permalink)
DOAOFFROAD Registered User Join Date: Jan 2004 Member # 26573 Location: Ohio Posts: 120	Should have bought mine. It already has discs. __________________ http://www.crazybabyclothing.com/cool-baby-onesies-c-24.html

11-13-2005, 12:59 AM	#14 (permalink)
roundeye Rock God Join Date: Aug 2001 Member # 6430 Location: Placerville, CA Posts: 1,242	Give us a jingle and we can get you the Alloy USA rear shafts. We even have them in stock. You're in the right section. Newb's ask shit like do I have brakes in the rear or not? __________________ Roundeyes.com OutbackToilets.com

11-15-2005, 08:19 AM	#15 (permalink)
tweba99 Registered User Join Date: May 2005 Member # 48100 Location: Florida Posts: 568	You made a mistake posting this here Anthony.... Since you got a bare Rubi housing though, you can just get the stock Rubi disc brakes with brackets for your housing. Cheapest I have found besides that is the Tera Disc Conversion.

11-15-2005, 09:21 AM	#16 (permalink)
jaybirdd Registered User Join Date: Nov 2005 Member # 57933 Location: western PA Posts: 66	a rubi 44 housing is as junk as a 35! same tube thickness and bending strength! get a 60 now, don't throw money away!

11-16-2005, 08:46 AM	#17 (permalink)
Redmist Registered User Join Date: Feb 2005 Member # 43646 Location: Idaho Posts: 1,651	I will sell you my rear rubi axle so I can go to a 60. It even has disk brakes!!! And I will leave them bolted on! Come on you know you want it.............

11-16-2005, 10:19 AM	#18 (permalink)
Steve N Registered User Join Date: Feb 2000 Member # 112 Location: Pleasant Hill CA Posts: 9,166	__________________ [COLOR=yellow]it's all about show & shine[/COLOR] [COLOR=Lime] Stiffy®? why screw around with anything less? [/COLOR] Charter member PBB mod divorce club for men.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode