passanger side output transfercase - Pirate4x4.Com : 4x4 and Off-Road Forum

DUK · 03-02-2006, 07:20 AM

Is there anything i can do to make my 89 YJ transfercase output shaft on the passanger side. I already have a scout rear dana 44 and I would like to use the front also. The tranny is a ax15 out of a cherokee.

CanuckJeeper · 03-02-2006, 07:55 AM

Run a modified Dana 300 (for the input shaft).

JP

butch6924 · 03-03-2006, 06:27 AM

Quote:

Originally Posted by CanuckJeeper

Run a modified Dana 300 (for the input shaft).

JP

what he said. You'll have to cut a hole in your floor becuae the sifter will be on the other side though.

CanuckJeeper · 03-03-2006, 07:12 AM

Depending how high you clock the D300, you will need more cutting. I mounted my D300 nearly "flat' (front output as high as rear output), and I had to do some somewhat heavy cutting of the floor.

JP

Quote:

Originally Posted by butch6924

what he said. You'll have to cut a hole in your floor becuae the sifter will be on the other side though.

03-02-2006, 07:20 AM	#1 (permalink)
DUK Registered User Join Date: Jun 2005 Member # 48606 Location: Houston, Tx Posts: 19	passanger side output transfercase Is there anything i can do to make my 89 YJ transfercase output shaft on the passanger side. I already have a scout rear dana 44 and I would like to use the front also. The tranny is a ax15 out of a cherokee.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-02-2006, 07:55 AM	#2 (permalink)
CanuckJeeper Registered User Join Date: Jan 2004 Member # 25999 Location: Columbia, SC Posts: 588	Run a modified Dana 300 (for the input shaft). JP