crank position sensor - Pirate4x4.Com : 4x4 and Off-Road Forum

Joker2669 · 12-11-2006, 07:51 PM

WOULD A crank position sensor cause stall outs and immediate-after no-starts? I replaced mine after it stopped for good once, luckily in my driveway. tow shop ran some tests and found the no start to be the CPS. I figure they go hand in hand since they would occur at the same time. and I also fear it was due to overheating. can something like a hot day affect this part?

sand dune coon · 12-12-2006, 10:22 AM

also check the "other" cps (cam position sensor) - i have no experience with this im just passing information on that i read about, apparently its located in the distributor cap, maybe someone else might know a little more..

12-11-2006, 07:51 PM	#1 (permalink)
Joker2669 Registered User Join Date: May 2005 Member # 47268 Location: Danbury, CT Posts: 228	crank position sensor WOULD A crank position sensor cause stall outs and immediate-after no-starts? I replaced mine after it stopped for good once, luckily in my driveway. tow shop ran some tests and found the no start to be the CPS. I figure they go hand in hand since they would occur at the same time. and I also fear it was due to overheating. can something like a hot day affect this part? __________________ Man became great through struggle - Show no compassion. Annihilate your enemies '95 XJ - current trail rig, future tow rig) 33X12.5 SS'ers on 4.5RE Superflex, no sway, TNT Front Bumper, Cast Iron Rear '87 Sami Stock (want to run 35's on a lift - future Trail Rig)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

12-12-2006, 10:22 AM	#2 (permalink)
sand dune coon Registered User Join Date: Nov 2005 Member # 57123 Location: Bay Area Cali Posts: 887	also check the "other" cps (cam position sensor) - i have no experience with this im just passing information on that i read about, apparently its located in the distributor cap, maybe someone else might know a little more..