Pirate 4x4 banner

Wagoneer Frame With CJ Tub

1K views 2 replies 2 participants last post by  noahsjeep 
#1 ·
Ok so I have this 79 Cherokee Chief Wagoneer with a 360 auto and 44's, but it has a shot tub, so I thought hey why not pull that tub and junk and stick my CJ tub and fenders on there, other than shortening the frame, it seems the rest should work......

That is until I thought about how wide a CJ tub was as opposed to how wide a Wagoneer was....

What's the difference in width between the 2 and has anyone ever seen this done before? I'm wondering how far the axles will stick out, how far I will have to shorten it and what other Problems I will run into......

Any advice suggestions or critisims welcome.

Thanks
Josh
 
#2 ·
Through some searching seems I'm coming up with a Full Size Jeep Frame is 38" in the front and 45 in the rear, a CJ is about 28 and 40, seems the rear wouldnt be bad, but the front would require a major rework........perhaps I should just look for a J pickup cab in better shape.......

What else swaps on these things pretty easy?
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top