Pirate 4x4 banner

Need Help, Mix 'N' Match 231/241

681 views 5 replies 3 participants last post by  GeneralGrimm 
#1 ·
I have a 01 TJ with a 5 speed trans and np231 t-case. I know of a NV241 for sale but it is out of an auto trans Jeep.

Can I replace the input gear with the one out of my np231 or would i have to order a 23 spline input shaft for the 241 ?

GeneralGrimm
 
#3 ·
ahhh, enough said. Thanks I was trying to find out what the spline count on the input shaft was on the nv241 (Rubicon) t-case. I was on numerous web sites. One did hint that they are 23 spline but I could not find any real tech page that could confirm.

GeneralGrimm :shaking:
 
#5 ·
I just put one in this weekend..The only problem I ran into was the old tranny mount will have to be changed to a 03-06 tranny mount...I bought the RE yoke for the rear to eliminate the flange and I need to take my front driveshaft in to have a new larger yoke put on at the Tcase end of it..
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top