Im sure this has been covered many many times but i did shackle reversal and installed the front mount backwards thus making my axle moved backwards. I was looking around the net at peoples shackle angles and saw that alot of people have there bottom of there shackles angled foward rather than behind the leaf. I drive mine daily, mine is SOA but i will also be putting wagoneer springs in it when i redo do this as well as my high steer 44 so i wont have to worry too much about steering. im going to flip the front mount around so the holes are right under the front of my bumper because i have it welded in front of the frame on my 1/4inch steel bumper thats welded to the frame in several places i added 2 inches of drop with a spring hanger and then added the mounts. my question is what angle should i be shooting for at no weight on the spring i.e. hanging them.