Pirate 4x4 banner

Front Track bar tube diameter/thickness?

6K views 5 replies 4 participants last post by  littlejoe83 
#1 ·
What is the recommended tube diameter and thickness for a front track bar.

is 1.5", .120 wall DOM tubing enough?
 
#4 ·
I use a lot of 1.25" .120 wall 4130 tubing for straight track bars. Never a failure and I've had some hits hard enough to snap the joint once.

If you put bends in it, you will need to bump up to a lot more wall thickness.

I don't like or use 1.5" stuff in the front because the tolerances are typically too tight.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top