Post a pic of your Rover!

[Cirbo]

This Series III was found on the outer banks of North Carolina. Two years later, it's finally done...



Cirbo

[SeaRover]

have a new LWB pavement princess as DD - it's a 94. other rig is too fugly and torn apart for pics

[SeaRover]

a friend catches me here preparing for the long trip up

[discochick]

my baby... camping 04

[DaveS3]

My stage 1 at a recent christmas trip on a beach in Victoria. My first real experience of beach / dune driving as we normally stick to rocks / mud.

Dave

[Pedro]

Hope this works,Thats my red 110 defender......

[OldFox]

My stock engined Series III living on the farm where I stored it before I had a garage. It ran like a sewing machine but needs some offroad mutations.

Now I have it in pieces in my garage for the winter getting a rebuild. Among other things it is getting Range Rover axels and a spring-over parabolic conversion welded on them with a gas flowed unleaded head and tubular manifold with SU carb. I'd like to stick an LT77 gearbox in there too. It has the agricultural grade Series III box.

[rover109]

Here is my 59 as I was working on it. Not much has changed.




This is for sale in the truck and trailer classifieds with a full rundown of what has been done and what is needed thx. Thx for putting the pics up OS.

[Chikor]

the daily driver/work in progress.....i would sell and or trade for an older II or III

'96 Disco 5 speed
i will never own an automatic!

[Ares]

My daily driver

[H-vegasdisco]

Some day it will be bigger.

[aquito]

1st post here...

this is my RRC 86, its totally stock cuz i bought it a week ago...im going to buy some 33`s this week....








and this is my dad`s 98 defender TD5

[JLanigan]

some day

[lostinboston]

[Lazy Bugger]

Here are some pictures of my mall-terrain vehicle.

First some stats: 1960 Land Rover Dormobile. Powerd by a Ford 302 with T-18 gearbox, series transfer case with Ashcroft high ratio kit installed, rear Salisbury with ARB. Front diff has Quife auto torque diff. 65 MPH at 2750 RPM, low range first 68:1. Three fuel tanks for a total of 42 gallons. also built in at frame level, 5 gallon propane tank, 15 gallon stainless water tank and 2.5 gal air tank fed by a QuickAir2.

It goes from driving to camp set up, a fresh salad made, and dinner cooking in less than 5 minutes in an weather.




Camped in kane Creek canyon, the morning after rain.

Rear interior fuly loaded for a couple week trip.



Kitchen ready for cooking. Propane stove with 2 burners and broiler, 2 sinks with running water. Oposite side has a chest type refrigerator/freezer.






Official Lazy Bugger

[Gremlin]

Hi Guys, time to post a pic of my landy.



Grem

[Grimace]

37" Maxxis went on yesterday

[DaveS3]

Recent one of mine - new paint, bodywork, series 2 guards with cut out / lifted headlights to clear tyres and other crap.



Dave

[LR Max]

73' Ex-MOD 109. My wheeler and daily driver. Here are my recent pics from Tellico.

Here I am getting my britches in a wad over the dent I just put in my new gas tank .


Climbing outta Fains Fod.


Etc...



A random mudhole at Tellico...

[Pugsly]

[kellymoe]

Death Valley/Panamint Valley trip

[blkdiscoII]

the disco @ the uwharrie safari.
pics are from playing around @ kodak rock.

[ROVERWANABE]

I AM JUST COMPLETING a 109, 1968 year with a 5 CYL Mercedes
300D

[will_warne]

Here's my truck:









It was a '94 300tdi CSW but I've changed a few things since I bought it 3 years ago.

Here's the basic spec:

- International HS 2.8l TGV (I'll be tuning it when the warrenty runs out in the summer )
- Breathed on M8274-50 on an ARB bumper at the front, Husky on a custom mounting at the back
- ARB airlockers f&r
- Maxi Drive halfshafts f&r
- OME 2" lift and custom cranked rear radius/trailing arms
- Safety Devices full extrnal cage
- 35" 'pedes
- All the usual underbody protection, snorkel etc etc.
- Rear seats removed, all carpets stripped out... you get the idea

I've got lots of jobs on the go at the moment:
- The M8274's getting a new drum along with a couple of other tweeks
- I'm adjusting the offset of the rims and adding beadlockers
- I've just about finished a new, side exit, exhaust
- A naughty transfer box is on the way soon
- Hopefully I'll have uprated CVs sorted soon

That'll be it for now, later this year the gearbox'll need replacing (not sure what I'm going to do there...) and then I'm going to have annother look at the suspension!

[Davidh]

Hey Guys,

Here's a few pics of the Disco on the street.