Pirate4x4.Com : 4x4 and Off-Road Forum - View Profile: blacksheep10
 
Pirate4x4.Com : 4x4 and Off-Road Forum  

Go Back   Pirate4x4.Com : 4x4 and Off-Road Forum > Members List
Notices

blacksheep10 blacksheep10 is offline

Vertical Limits

Visitor Messages

Showing Visitor Messages 1 to 10 of 26
  1. skeeter03
    05-19-2017 08:41 AM - permalink
    skeeter03
    Hey man I was doing some searching on 14 bolt steer axles and found a thread from a while back ago where you stated that you have built multiple rear steering 14s and i was wondering if you could give me some more info on it. I currently have a dually 14 and a wrecked dana 60 super duty that has the tubes twisted in the housing and thats all that was wrong with it i was wondering if i could use those knuckles on the dually i have and retube the 14 and put these knuckles on and get custom shafts made etc. or would it be better to try and do the rockwell14 steer i am wanting this to be a rear steer axle. any advice would be greatly appreciated you can contact me here or via email at chaz.b8790@gmail.com

    TIA,
  2. nvrstuk@elltel.net
    03-19-2017 08:20 PM - permalink
    nvrstuk@elltel.net
    Interested in 2- 16" STX w/o reservoirs... thanks
  3. MOFO_Runner
    03-08-2017 11:17 AM - permalink
    MOFO_Runner
    I'm not far from you and may have to visit sometime soon. I stumbled onto the ORI thread and it sounds perfect for what I need.
  4. nvrstuk@elltel.net
    10-12-2016 07:27 AM - permalink
    nvrstuk@elltel.net
    Are you still a distributor for ORI's?

    I'm seriously looking at 22 14" ORI's for the rear of my '68 Bronco when I complete my 4 link later this fall.

    Price for a pair (standard black, no reservoir). How far in advance do i need to order?

    thanks
    Brian
    nvrstuk@elltel. net
  5. parker757
    12-18-2014 12:47 PM - permalink
    parker757
    I have a 97 TJ with a 3 inch lift. What size ORI would you recommend?
  6. youngbloodz
    12-01-2014 04:30 PM - permalink
    youngbloodz
    i was told you have good prices on lsx motor mount plates and tabs, do you have a price list of products you offer?
  7. mike Zeko
    04-24-2014 10:33 AM - permalink
    mike Zeko
    How much for 2 12in ori shocks
  8. scubajeeper
    03-18-2014 06:38 PM - permalink
    scubajeeper
    How much for a pair of 14 inch stx's shipped to 71360
  9. n20jeep
    11-26-2013 02:49 PM - permalink
    n20jeep
    hi, looking for a quote on some 14" and 16" STX, shipped to 32233
  10. oddcarma
    06-01-2013 06:46 PM - permalink
    oddcarma
    Forgot to add. With the full weight of the truck on the uncharged (as shipped) struts there is 3/4 inch of shiny shaft showing.

Statistics

Total Posts
Visitor Messages
Blog
General Information
  • Last Activity: Yesterday 10:05 AM
  • Join Date: 01-21-2004

Friends

Showing Friends 1 to 6 of 6

Mentions

No results to display...

Quotes

05-04-2017
06:48 AM - blacksheep10 quoted Wilson in post ORI STX 1/2" mounting bolt...any failures?
Someone at koh was selling ...
04-17-2017
08:07 AM - YotaAtieToo quoted blacksheep10 in post Deep ratio 9" gear strength, 6.20/7.16
Got it. Too bad you can't get a...
07:16 AM - YotaAtieToo quoted blacksheep10 in post Deep ratio 9" gear strength, 6.20/7.16
What outers on the budget 9 front...
01-31-2017
01:22 PM - blacksheep10 quoted Wilson in post More IFS 4x4 biulds
Joe Thompson dropped a few ...
01-19-2017
07:50 PM - blacksheep10 quoted Bones in post 90's throw back....Manche build
Wouldn't tying it into the...
01-09-2017
02:25 PM - Beat95YJ quoted blacksheep10 in post Stainless Cage Build......
SXOR chassis right? Red tins? ...
11:33 AM - blacksheep10 quoted Beat95YJ in post Stainless Cage Build......
Didn't crawl build one? Saw ...
11-17-2016
06:38 AM - blacksheep10 quoted bdkw1 in post Acroloc cnc mill that could go away
Drives and motors are all ...
11-16-2016
06:30 AM - blacksheep10 quoted bdkw1 in post Acroloc cnc mill that could go away
Wow, I haven't seen one of...
11-14-2016
12:54 PM - arse_sidewards quoted blacksheep10 in post Stamping part numbers in steel. Need help
ended up having a kid run a hamme...
07:22 AM - blacksheep10 quoted allan101 in post Stamping part numbers in steel. Need help
Ever figure it out Bought ...
11-02-2016
10:19 AM - American quoted blacksheep10 in post Deleted Posts
10-31-2016
07:27 AM - blacksheep10 quoted American in post The buggy dimensions that nobody talks about
7.5 years later, and this is ...
10-29-2016
07:40 AM - American quoted blacksheep10 in post The buggy dimensions that nobody talks about
My method involves the engine/tra...
10-24-2016
06:34 AM - blacksheep10 quoted thunder_struck in post rear diff whine - tore down - can't find source
What did you mean by "pinion rolled...
10-15-2016
02:19 PM - thunder_struck quoted blacksheep10 in post rear diff whine - tore down - can't find source
Had about the exact scenario on a...
10-03-2016
10:58 AM - pennsylvaniaboy quoted blacksheep10 in post 8 ball
How did the seat foam work Hah...
09-29-2016
06:32 AM - spidr quoted blacksheep10 in post 8 ball
This makes me old, or a pussy, bu...
09-26-2016
07:37 AM - 06silverback quoted blacksheep10 in post Broke BJ Ford knuckle - '94 - upgrade options?
06, do you sell a kit? I have ...
09-15-2016
06:59 AM - mcutler1 quoted blacksheep10 in post 90's throw back....Manche build
I was going to say the same, you ...

All times are GMT -7. The time now is 05:00 PM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 ©2011, Crawlability, Inc.
User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.