Pirate4x4.Com : 4x4 and Off-Road Forum - View Profile: mpascino
Pirate4x4.Com : 4x4 and Off-Road Forum  

Go Back   Pirate4x4.Com : 4x4 and Off-Road Forum > Members List

mpascino mpascino is offline

Trail Tech Fab

Visitor Messages

Showing Visitor Messages 1 to 10 of 23
  1. johndoe31533
    03-17-2015 08:46 PM - permalink
    Do you still have the Infinitely clockable GM T-case adapter?
  2. Welderup57
    02-24-2015 11:13 AM - permalink
    I in need o some help!! I have a 86 k10 that i put a 5 speed out of a 1990 k1500 into, my problem is my np 208 wont bolt up because the trans is a 32 spline and the t-case is a 27 spline. I have a np205 that came off of a turbo400, do you make an adapter to make this work? Any info or help would be greatly apreciated!!! Thanks
    11-29-2013 10:11 AM - permalink
    Need to ask about clocking ring for th400/np205. PM me or call 520-240-2625
  4. geemantex
    06-11-2013 05:40 PM - permalink
    I have a TH400 transmission to np208C transfer case setup (32 spline in and out). I want to change the output tail shaft on the transfer case to a fixed yoke and short the overall length of the transfer case. Do you have anything like this? I have see people take the np208D tailshaft, output gear and bearing and install it in the chevy NP208C housing by just rotating the np208d tailshaft oiler to match the np208c and then tapping new mounting holes (see the below link). If you have anything, please let me know. The shortened tailshaft looks to be about 5 or so inches less.

    slip yoke eliminator for chevy np208
    slip yoke eliminator for chevy np208

    Garon Evans
  5. 1nasty86
    04-11-2013 04:06 PM - permalink
    Tried pming you about a 80e/205 adapter... shoot me a pm if you would man
  6. davesmith89
    04-04-2013 03:48 PM - permalink
    how can i make orders? the web site doesn't work
  7. b&b performance
    02-08-2013 05:12 PM - permalink
    b&b performance
    im interested in turbo350 to np205 diy adaptor $. also your 205 cable shift brackets $. sent to 63461. and how you take payment. thank you for your time!
  8. Hammered Scout
    01-03-2013 03:33 PM - permalink
    Hammered Scout
    I have a Dodge 29 spline 4x4 NV4500 and want to run a divorced tcase. Could you make a plate with a bore for a slipjoint Yoke? The spud shaft would have a fixed yoke at tcase. It's a Chevy fullsize Crewcab so length is not an issue. Thanks
  9. Litch
    10-19-2012 08:38 PM - permalink
    I am interested in purchasing a clocking plate for a Gm np205. I am in Ct was wondering if I could pick up instead of waiting for shipping. 860-508-0111 (Chris)
  10. burgandychevy91
    09-18-2012 03:16 PM - permalink
    im interested in your infinitey clocking ring kinda like to learn a little more about it. an was also wondering what i need to do for shifter for my gm 205.

About Me

  • About mpascino
    Company Name
    Trail Tech Fab
    Coventry, CT
  • Signature
    Trail Tech Fab
    Home of Infinitely Clockable T-Case Components and Adapter Kits

    CNC plasma cutting up to 1 inch, PM me for more info.


Total Posts
Visitor Messages
General Information
  • Last Activity: 02-12-2016 05:29 PM
  • Join Date: 05-27-2004


Showing Friends 1 to 7 of 7


No results to display...


04:09 AM - mpascino quoted dan603 in post Trail Tech Fab, Machine work, plasma, etc Located in Connecticut
Mike, I sent you an email. ...
02:30 PM - mpascino quoted 04SilveradoLSCrewCab in post NP 205 Rear Support / Torque Mount
Hey his I have a 04 silverado crew cab wi...
08:28 AM - mpascino quoted expocrawler86 in post Under drive adapter kit, 231 to 6 bolt/205
What options would i have with a F...
05:32 AM - mpascino quoted frikenwoodro in post Figure 8 NP 205 Clocking Ring
You have any pics of these instal...
05:24 AM - mpascino quoted charlie2tight in post Infinitely clockable GM T-case adapter kits replaces stock full spline engagement!
How much for one to fit a TH400 to...
05:02 AM - mpascino quoted rabbiporkchop in post Infinitely clockable GM T-case adapter kits replaces stock full spline engagement!
How much for an unwelded adapter t...
05:51 PM - mpascino quoted Daymond in post Infinitely clockable GM T-case adapter kits replaces stock full spline engagement!
...2943? Thanks. Daymond, what transmission i...
08:05 AM - mpascino quoted ChestonScout in post NP 205 Rear Support / Torque Mount
Pm sent Invoice sent! Yes we hav...

All times are GMT -7. The time now is 01:07 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2016, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 ©2011, Crawlability, Inc.
User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.