onetoncv

Yes we do - there 145.00

hey jess, do you flanges for a 14b to rockwell pattern?? if so i need a quote on 2 please.

Hey Jess,

Dropped you a pm and a voicemail. Would you please give me a call asap? Thanks bud, chris

the flange is 109.00 and 1350 yokes when available 79.00 and 1410 dana 60 yokes are 95.00- Jess

Jess, I need to get a price on a companion flange for a divorced np 205 that will mate to a super duty double cardian with the 2" pilot. I also would like to get a price for a 1350 and 1410 yoke for a Dana 60/70 thank you

Wasillasack these are 135.00- there are 2 sizes 1 1/8 / and 1 1/4 the 1 1/4 is on back order - Jess

AA used to make a replacement Dana 18 intermediate shaft that utilized tapered bearings. if it is still available what is your price for it? Thx, Shack

running a shackle flip and stock rear springs in the rear. so around 4 inch of lift. tires are 38`s. stock driveshaft has been doing the job but the slipyoke is worn out and I am about to change out the rear output bearing on my 205, so should prob do the shaft too. the stock one is about 5 inch around.

What size tire and how much angle or lift on this ? Aprox cost on shipping could start to Canada ups ground at around 85.00 and up . Jess
hi jess, you being a well respected member on here I figured I would ask you this question. First let me say I would be ordering a drivshaft from you and I may well be but I believe shipping cost would be to great. anyway I am looking for a rear driveshft which is for a regular cab long box gm, with a 14 bolt and np205 with stock yokes. they are 1350's I believe. around 5 feet long with a short slip yoke, ( iwill get you the exact measurment if the shipping thing works out). just wondering what I should look for in a decently built driveshaft for my set up. like wall thickness and od of driveshaft. I would also like a shipping quote to area code P0M 1T0 ontario canada for the same. oh ya running stock 350 tbi going to a 6.0 litre if ths tbi ever dies. thanks for your time and advice.
Pat Pos

hi jess, you being a well respected member on here I figured I would ask you this question. First let me say I would be ordering a drivshaft from you and I may well be but I believe shipping cost would be to great. anyway I am looking for a rear driveshft which is for a regular cab long box gm, with a 14 bolt and np205 with stock yokes. they are 1350's I believe. around 5 feet long with a short slip yoke, ( iwill get you the exact measurment if the shipping thing works out). just wondering what I should look for in a decently built driveshaft for my set up. like wall thickness and od of driveshaft. I would also like a shipping quote to area code P0M 1T0 ontario canada for the same. oh ya running stock 350 tbi going to a 6.0 litre if ths tbi ever dies. thanks for your time and advice.
Pat Posteraro.