steering reservoir with filter

[billybob13]

these are high quality reservoirs with baffle, filter, and a good sealing cap. mounts to flat bracket with your choice of bolts, drilled where you want.

comes with filter and AN fittings. uses PH8A or HP3 (shorter) replacement filters

$85 each plus flat rate shipping.
$60 each for standard tank (no filter).

i also have radiator over flows that look just like these, but no filter obviously, and a vent tube inside that doubles as an overflow for the overflow. those are $60 each plus shipping. see pics on the next page of this thread.

[Toyota_Force]

What size AN fitting is on them? -6 or -8?

[Toyota_Force]

for return? Feed -10 or -12?

[billybob13]

-8 in, and -10 to the pump.

i have one on my rig and i love it.

[Toyota_Force]

Cool. Do you have the overall height with filter on? Also is there enough capacity to run f/r single ended 3"x10" rams?

[billybob13]

Originally Posted by Toyota_Force

Cool. Do you have the overall height with filter on? Also is there enough capacity to run f/r single ended 3"x10" rams?

13 overall, 4" diameter.

it's a good sized tank, but with both of those rams collapesd i think your fluid will be right up at the cap, while down towards the filter extended. you would also need to drill the cap and add a breather to allow for all that expansion.

you probably need a 3 quart tank for all that fluid displacement.

[Toyota_Force]

Lol it's less then you think. It only displaces the amount of the shaft. So 1.5 x 10 ish. This reservoir isn't vented?

[billybob13]

Originally Posted by Toyota_Force

Lol it's less then you think. It only displaces the amount of the shaft. So 1.5 x 10 ish. This reservoir isn't vented?

front and rear though? that doubles the amount.

these are non vented like most others.

[billybob13]

ttt

[Toyota_Force]

Ya but even front and rear isn't much when it's just the displacement of the rod. Once I'm closer to this point I'm hoping to order some stuff from you if it'll work for my setup. The lack of vent seems odd. That means the system could be under pressure or vacuum depending how it was setup.

[billybob13]

Originally Posted by Toyota_Force

Ya but even front and rear isn't much when it's just the displacement of the rod. Once I'm closer to this point I'm hoping to order some stuff from you if it'll work for my setup. The lack of vent seems odd. That means the system could be under pressure or vacuum depending how it was setup.

i've ran several different hydro assist and full hydro set ups and none of my reservoirs (which came from popular suppliers for rock crawling) ever had vents. never had an issue.

but like i said, it takes a minute or 2 to drill a hole and install a fiting and hose.

[Toyota_Force]

Cool... odd but cool. I've only ran PSC and they have vents... or at least the ones I ran did

[billybob13]

ttt

[billybob13]

:d

[billybob13]

thnks guys.

[billybob13]

ttt

[Wilson]

good thing I'm bringing cash

[REDMANYJ]

what filter comes with it?

[billybob13]

Originally Posted by REDMANYJ

what filter comes with it?

a cheapo that i'm running on my full hydro set-up. works good.

[jeepguy365]

Do you have any with an extra port for hydro boost return line?

[xj9140]

Originally Posted by jeepguy365

Do you have any with an extra port for hydro boost return line?

x2 I need a extra return port. Are they easily added?

[billybob13]

Originally Posted by jeepguy365

Do you have any with an extra port for hydro boost return line?

Originally Posted by xj9140

x2 I need a extra return port. Are they easily added?

they dont come that way, but i'll check this week to see what it takes to drill & tap them for it. if i can do it, it should be $10 extra. otherwise, are you guys opposed to running a T-fitting on the inlet? not sure if that would affect the flow or not.

[crewchief]

Looks just like a howe res that im currently running and mine is not vented and works great! Good luck with the sales!

[Jaiden]

Cool how do I order one

[David D]

Same as above. Pm me the info to get one of these ordered up.