Threaded Tube Adapters and Misalignment Spacers - Pirate4x4.Com : 4x4 and Off-Road Forum

CoryL · 01-06-2003, 06:56 AM

Weld-in Tube Adapters

For 3/4" and 1.25" heims both LH and RH thread.

3/4" = $12 each
1.25" = $13 each

3/4" is designed to fit inside tubing with an ID of 1.0".

This would mean a 1.25" x 0.120 wall tube or a 1.5" x 0.250 wall tube.

1.25" is designed to fit inside tubing with an ID of 1.5".

This would mean a 1.75" x 0.120 wall tube or a 2.0" x .0250 wall tube.

Misalignment Spacers

For 3/4" and 1.25" heims to reduce to a 5/8" bolt.

3/4" = $4 each
1.25" = $12 each

pavelow · 01-11-2003, 08:24 PM

Bump for ya, Cory. This guy does KILLER work!!

01-06-2003, 06:56 AM	#1 (permalink)
CoryL Registered User Join Date: Oct 2000 Member # 1981 Location: Louisville,KY Posts: 536	Threaded Tube Adapters and Misalignment Spacers Weld-in Tube Adapters For 3/4" and 1.25" heims both LH and RH thread. 3/4" = $12 each 1.25" = $13 each 3/4" is designed to fit inside tubing with an ID of 1.0". This would mean a 1.25" x 0.120 wall tube or a 1.5" x 0.250 wall tube. 1.25" is designed to fit inside tubing with an ID of 1.5". This would mean a 1.75" x 0.120 wall tube or a 2.0" x .0250 wall tube. Misalignment Spacers For 3/4" and 1.25" heims to reduce to a 5/8" bolt. 3/4" = $4 each 1.25" = $12 each __________________ Anyone have any Massey 60s for sale? Last edited by CoryL; 01-06-2003 at 07:00 AM.

01-11-2003, 08:24 PM	#2 (permalink)
pavelow Registered User Join Date: Apr 2001 Member # 4225 Location: Panhandle........Fl Posts: 476	Bump for ya, Cory. This guy does KILLER work!! __________________ Wanna touch it?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode