Dana 300 clocking kits - Pirate4x4.Com : 4x4 and Off-Road Forum

Go2Guy · 05-07-2003, 05:27 AM

To celebrate that I got off my collective but long enough to buy my yellow star....

I just had a huge batch of kits made to further reduce manufacturing cost, available for 300's or 231's, complete kits (with sleeve for input shaft to reach the seal), in stock- the original clocking ring- can be seen by clicking on my site.

Significantly reduced price thru May 31st- PM/email me for price.

Happy Wheelin

JParuBob · 05-07-2003, 05:30 AM

if only i had money...

madmarx · 05-07-2003, 06:51 AM

Come on guys, Ken has a great price and great service. I just ordered one.

Lance · 05-07-2003, 09:52 AM

I've got one of Ken's kits, and it is a sweet setup! WELL worth the $$$....

DSI · 05-07-2003, 10:04 AM

Quote:

Originally posted by Lance
I've got one of Ken's kits, and it is a sweet setup! WELL worth the $$$....

excellent piece, to bad i had to mutalate it to get it to work for my application

great service too

MellowYellow · 05-07-2003, 02:47 PM

I just ordered my ring. Thanks Ken.

It’s a great deal.

Go2Guy · 05-07-2003, 02:53 PM

Thanks for the biz guys! Next month- Edge Diesel performance products going on sale!

DSI · 05-07-2003, 04:59 PM

Quote:

Originally posted by Go2Guy
Thanks for the biz guys! Next month- Edge Diesel performance products going on sale!

reallly now?

Go2Guy · 05-08-2003, 05:30 AM

Really...
http://www.edgeproductsinc.com/

DP_90K5 · 05-08-2003, 03:24 PM

Hey,
Will this work on a Chevy 241?

Go2Guy · 05-08-2003, 06:54 PM

I've got a kit for pass and drivers side depending which you have.

sceep · 05-09-2003, 07:17 AM

awesome kit, support, and service. buy from this vendor!

DP_90K5 · 05-09-2003, 07:41 AM

I've got the passenger side drop. What comes in the 241 kit and how much is it?
Thanks

Flatty · 05-09-2003, 08:55 AM

If I clock it behind a TF727, will I come into problems with the 727 housing? If not, I want one. As is right now, not clocked, off the 300, my shaft is hitting the tranny housing.

dimitri

Go2Guy · 05-09-2003, 08:58 AM

I have a lot of personal experience here, you're best off to call me about all the tricks and variables. Yes it can be done, even easily, a lot depends on all those variables. 479 636 4669

Flatty · 05-09-2003, 12:04 PM

Call me at 415-517-2692 in about 2 hours. I tried calling, but VM was all I got.

Dimitri

NastyNate · 05-12-2003, 04:55 AM

Got my 300 kit in the mail Friday, thanks Go2Guy!

madmarx · 05-12-2003, 05:11 AM

I got mine on Friday also. Thanks a bunch for the great service.

bigdude · 05-12-2003, 05:37 AM

I got the 231 kit. Thanks Ken it's the poop

MellowYellow · 05-12-2003, 09:31 AM

Thanks Ken, mine was on my desk when I came in this morning.

desertCJ · 05-13-2003, 12:42 PM

I ordered two

Is there a difference between the 231 and the 300 kits? Cus Ken didnt' ask wich I was running and I just assumed they were the same...

Go2Guy · 05-13-2003, 12:50 PM

Yes, there's a difference and I shipped you two of the 300 kits. PM or call and we'll get it fixed.

desertCJ · 05-13-2003, 01:19 PM

Thanks Ken you're a good guy and I'll recomend your product to anyone I meet

Rokcrler · 05-16-2003, 07:20 PM

Quote:

Originally posted by Go2Guy
I have a lot of personal experience here, you're best off to call me about all the tricks and variables. Yes it can be done, even easily, a lot depends on all those variables. 479 636 4669

Got the kit and it fits nice...except for the TF727 and HP pass. side 60

I used the second hole (no wise cracks) and the DS seems awfully close... we'll see tomorrow when i mock up the front axle bolted to the springs...

Other than that great kit esspessially with the included sleeve... thanks Ken...

Mo

Go2Guy · 05-22-2003, 09:50 AM

to this special, only 9 days left, tell your friends.

Next month Edge Diesel Performance products!

Even Fords and Chevy's will run well (Oops, that slipped out)!

05-07-2003, 05:27 AM	#1 (permalink)
Go2Guy Zeus of the Sluice Join Date: Jun 2002 Member # 12158 Location: Tulsa, OK Posts: 4,596	Dana 300 clocking kits To celebrate that I got off my collective but long enough to buy my yellow star.... I just had a huge batch of kits made to further reduce manufacturing cost, available for 300's or 231's, complete kits (with sleeve for input shaft to reach the seal), in stock- the original clocking ring- can be seen by clicking on my site. Significantly reduced price thru May 31st- PM/email me for price. Happy Wheelin __________________ Ken Blume Rock Rod Racing Team #192/4192 Thanks to our partners Maxxis, Trail-Gear, Yukon Gear, Goatbuilt, Tom Woods Custom Driveshafts, Ruffstuff specialties, Warn Winch, Rokit Enterprises, Viair, Edge Perf., Branik Motorsports, PRP seats, 12V unlimited, Bailie built, Baertrax, Raceline

05-07-2003, 02:53 PM	#7 (permalink)
Go2Guy Zeus of the Sluice Join Date: Jun 2002 Member # 12158 Location: Tulsa, OK Posts: 4,596	Thanks for the biz guys! Next month- Edge Diesel performance products going on sale! __________________ Ken Blume Rock Rod Racing Team #192/4192 Thanks to our partners Maxxis, Trail-Gear, Yukon Gear, Goatbuilt, Tom Woods Custom Driveshafts, Ruffstuff specialties, Warn Winch, Rokit Enterprises, Viair, Edge Perf., Branik Motorsports, PRP seats, 12V unlimited, Bailie built, Baertrax, Raceline

05-08-2003, 05:30 AM	#9 (permalink)
Go2Guy Zeus of the Sluice Join Date: Jun 2002 Member # 12158 Location: Tulsa, OK Posts: 4,596	Really... http://www.edgeproductsinc.com/ __________________ Ken Blume Rock Rod Racing Team #192/4192 Thanks to our partners Maxxis, Trail-Gear, Yukon Gear, Goatbuilt, Tom Woods Custom Driveshafts, Ruffstuff specialties, Warn Winch, Rokit Enterprises, Viair, Edge Perf., Branik Motorsports, PRP seats, 12V unlimited, Bailie built, Baertrax, Raceline

05-08-2003, 06:54 PM	#11 (permalink)
Go2Guy Zeus of the Sluice Join Date: Jun 2002 Member # 12158 Location: Tulsa, OK Posts: 4,596	Yes it will I've got a kit for pass and drivers side depending which you have. __________________ Ken Blume Rock Rod Racing Team #192/4192 Thanks to our partners Maxxis, Trail-Gear, Yukon Gear, Goatbuilt, Tom Woods Custom Driveshafts, Ruffstuff specialties, Warn Winch, Rokit Enterprises, Viair, Edge Perf., Branik Motorsports, PRP seats, 12V unlimited, Bailie built, Baertrax, Raceline

05-09-2003, 08:55 AM	#14 (permalink)
Flatty Registered User Join Date: Feb 2000 Member # 29 Location: Belmont, CA Posts: 6,389	If I clock it behind a TF727, will I come into problems with the 727 housing? If not, I want one. As is right now, not clocked, off the 300, my shaft is hitting the tranny housing. dimitri __________________ 1974 FJ40 in the works 2006 F250 crew cab longbed powerstroke for towing duties

05-07-2003, 06:51 AM	#3 (permalink)
madmarx Registered User Join Date: Jun 2001 Member # 5115 Location: Chattanooga Tn Posts: 723	Come on guys, Ken has a great price and great service. I just ordered one.

05-07-2003, 09:52 AM	#4 (permalink)
Lance Administrator Join Date: Jun 1996 Member # 1 Location: El Dorado Hills, CA Posts: 18,739 Blog Entries: 1	I've got one of Ken's kits, and it is a sweet setup! WELL worth the $$$....

05-07-2003, 02:47 PM	#6 (permalink)
MellowYellow Registered User Join Date: Feb 2000 Member # 20 Location: San Jose, CA Posts: 1,076	I just ordered my ring. Thanks Ken. It’s a great deal.

05-08-2003, 03:24 PM	#10 (permalink)
DP_90K5 Registered User Join Date: Jan 2002 Member # 9663 Location: In the Field Posts: 119	Hey, Will this work on a Chevy 241?

05-09-2003, 07:41 AM	#13 (permalink)
DP_90K5 Registered User Join Date: Jan 2002 Member # 9663 Location: In the Field Posts: 119	I've got the passenger side drop. What comes in the 241 kit and how much is it? Thanks

05-09-2003, 08:58 AM	#15 (permalink)
Go2Guy Zeus of the Sluice Join Date: Jun 2002 Member # 12158 Location: Tulsa, OK Posts: 4,596	ahhhhh, the 727.... I have a lot of personal experience here, you're best off to call me about all the tricks and variables. Yes it can be done, even easily, a lot depends on all those variables. 479 636 4669 __________________ Ken Blume Rock Rod Racing Team #192/4192 Thanks to our partners Maxxis, Trail-Gear, Yukon Gear, Goatbuilt, Tom Woods Custom Driveshafts, Ruffstuff specialties, Warn Winch, Rokit Enterprises, Viair, Edge Perf., Branik Motorsports, PRP seats, 12V unlimited, Bailie built, Baertrax, Raceline

05-09-2003, 12:04 PM	#16 (permalink)
Flatty Registered User Join Date: Feb 2000 Member # 29 Location: Belmont, CA Posts: 6,389	Call me at 415-517-2692 in about 2 hours. I tried calling, but VM was all I got. Dimitri __________________ 1974 FJ40 in the works 2006 F250 crew cab longbed powerstroke for towing duties

05-12-2003, 04:55 AM	#17 (permalink)
NastyNate Registered User Join Date: Aug 2002 Member # 13276 Location: Chattanooga, TN Posts: 619	Got my 300 kit in the mail Friday, thanks Go2Guy! __________________ Those who give up a little freedom for a little security, WILL SOON LOSE BOTH AND DESERVE NEITHER!

05-12-2003, 05:11 AM	#18 (permalink)
madmarx Registered User Join Date: Jun 2001 Member # 5115 Location: Chattanooga Tn Posts: 723	I got mine on Friday also. Thanks a bunch for the great service.

05-12-2003, 05:37 AM	#19 (permalink)
bigdude Zeus of the Sluice Join Date: Jul 2001 Member # 6007 Location: Tulsa, OK Posts: 4,410	I got the 231 kit. Thanks Ken it's the poop __________________ 4-Seats of Fury LS1, 700r4, Atlas 3.0, 2.5 SAWs, Reds Lead Foot Syndicate

05-12-2003, 09:31 AM	#20 (permalink)
MellowYellow Registered User Join Date: Feb 2000 Member # 20 Location: San Jose, CA Posts: 1,076	Thanks Ken, mine was on my desk when I came in this morning.

05-13-2003, 12:42 PM	#21 (permalink)
desertCJ "Chip Ninja" Join Date: Jan 2002 Member # 9026 Location: Behind Enemy Lines, CA Posts: 3,591	I ordered two Is there a difference between the 231 and the 300 kits? Cus Ken didnt' ask wich I was running and I just assumed they were the same... __________________ ..... ... ....

05-13-2003, 12:50 PM	#22 (permalink)
Go2Guy Zeus of the Sluice Join Date: Jun 2002 Member # 12158 Location: Tulsa, OK Posts: 4,596	whoops! Yes, there's a difference and I shipped you two of the 300 kits. PM or call and we'll get it fixed. __________________ Ken Blume Rock Rod Racing Team #192/4192 Thanks to our partners Maxxis, Trail-Gear, Yukon Gear, Goatbuilt, Tom Woods Custom Driveshafts, Ruffstuff specialties, Warn Winch, Rokit Enterprises, Viair, Edge Perf., Branik Motorsports, PRP seats, 12V unlimited, Bailie built, Baertrax, Raceline

05-13-2003, 01:19 PM	#23 (permalink)
desertCJ "Chip Ninja" Join Date: Jan 2002 Member # 9026 Location: Behind Enemy Lines, CA Posts: 3,591	Thanks Ken you're a good guy and I'll recomend your product to anyone I meet __________________ ..... ... ....

05-22-2003, 09:50 AM	#25 (permalink)
Go2Guy Zeus of the Sluice Join Date: Jun 2002 Member # 12158 Location: Tulsa, OK Posts: 4,596	We've had terrific response.... to this special, only 9 days left, tell your friends. Next month Edge Diesel Performance products! Even Fords and Chevy's will run well (Oops, that slipped out)! __________________ Ken Blume Rock Rod Racing Team #192/4192 Thanks to our partners Maxxis, Trail-Gear, Yukon Gear, Goatbuilt, Tom Woods Custom Driveshafts, Ruffstuff specialties, Warn Winch, Rokit Enterprises, Viair, Edge Perf., Branik Motorsports, PRP seats, 12V unlimited, Bailie built, Baertrax, Raceline

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode