Sway-A-Way Coil Over Shocks......... $199.99 - Pirate4x4.Com : 4x4 and Off-Road Forum

PIG · 09-09-2003, 08:18 AM

Today, through the month of Sept. Sway-A-Way 2" diameter coil over emulsion shocks are on sale for $199.99 each. Sway-A-Way dual rate kits and Eibach coils sold separately. Eibach coils are GUARANTEED not to sag!

As always, doing spring calculations to determine the CORRECT spring rates are always complimentary as well as our coil swapping program.

Call for more info: 805-234-1760

To get the discount you must mention this add from PBB.

INFAMOUSBUTCHER · 09-09-2003, 05:13 PM

what length do these come in? 14 ? 16? both?

do you have prices on springs?

Yotaonly · 09-09-2003, 07:08 PM

Shock Info

Springs

Nice deal PIG, I may have to give you a call this month, I don't need to pay the rent, right?

PIG · 09-09-2003, 09:56 PM

Quote:

Originally posted by INFAMOUSBUTCHER
what length do these come in? 14 ? 16? both?

do you have prices on springs?

The deal is for ALL travel 2" emulsion shocks. All we carry in stock are 12", 14", 16" travel shocks in SAW 2" dia.

Prices on springs can be found HERE

PIG · 09-09-2003, 09:57 PM

Quote:

Originally posted by Yotaonly
Shock Info

Springs

Nice deal PIG, I may have to give you a call this month, I don't need to pay the rent, right?

Chit, didn't see that post. Thanks yota!

broncorob · 09-10-2003, 08:07 AM

Hey Dave,
Is there any reason to have a remote res shock on a rock buggy? I would assume no.

On another note, I bent a shock shaft at EROCC that I'm gonna have to fix(I'll call ya later). Troy from the badlands hooked me up with a Fox shock. Why can't sway away do something to retain the lower coil cup like Fox

Yeah I know, you don't design em you just sell em

PIG · 09-10-2003, 07:42 PM

Quote:

Originally posted by broncorob
Hey Dave,
Is there any reason to have a remote res shock on a rock buggy? I would assume no.

On another note, I bent a shock shaft at EROCC that I'm gonna have to fix(I'll call ya later). Troy from the badlands hooked me up with a Fox shock. Why can't sway away do something to retain the lower coil cup like Fox
Yeah I know, you don't design em you just sell em

Nope, no reason to have a res on a rock buggy (no prolonged high speed stuff).

I can fix you shock for you or at the very least get you a ew shaft. Also, I have come up with a very simple solution to the SAW bottom coil retainer problem. What I do is put a fox shaft bumpstop at the bottom. What it does is retain the bottom coil retainer while also keeping the shock from bottoming out on the shock top cap.

pmurf1 · 09-10-2003, 08:07 PM

PIG,

Can you post a pic of your solution for the coil popping out at the bottom on the SAW's? It's a real pain in the ass to have to reseat that thing instead of wheeling. How much extra for this solution?

broncorob · 09-11-2003, 07:14 AM

Yeah, I'm interested in this too. Doubt I'll spend anymore money on my SAWs but I'd like to see. How hard is it to replace a shaft Dave?
Also, on my old improperly setup under the bigbronco, the coils rubbed the shock body pretty badly when they came unseated. Now I cant screw the adjuster rings on and off. If you don't wanna post em will you PM me a price for the outside body of the shock(the part with the threads for the adjuster) and a single shaft for a 16" travel remres shock.

PIG · 09-12-2003, 08:24 AM

Quote:

Originally posted by pmurf1
PIG,

Can you post a pic of your solution for the coil popping out at the bottom on the SAW's? It's a real pain in the ass to have to reseat that thing instead of wheeling. How much extra for this solution?

Well it really sounds like you need a tender coil set up but the other alternative soud arrive today, i was just waiting for some parts. I'll post pics when they are ready.

PIG · 09-12-2003, 08:28 AM

Quote:

Originally posted by broncorob
Yeah, I'm interested in this too. Doubt I'll spend anymore money on my SAWs but I'd like to see. How hard is it to replace a shaft Dave?
Also, on my old improperly setup under the bigbronco, the coils rubbed the shock body pretty badly when they came unseated. Now I cant screw the adjuster rings on and off. If you don't wanna post em will you PM me a price for the outside body of the shock(the part with the threads for the adjuster) and a single shaft for a 16" travel remres shock.

Accually because the shock is a rem. res t is a little trickier. Call me and I would be glad to walk through it wioth you. Also, the coils rubbing on the shock body issue. SAW has had some problems with their sliders in their dual rate kits. They were being made of a urethane that was TOO soft. So what happened was that coils would cockeye themselves on the body and end up rubbing really bad on the shock bodies.

Here is the fix, switch to Fox sliders.

Bushwhacker · 09-13-2003, 10:41 AM

Would these work on a TJ trail buggy? Not sure how much it will weigh when I'm done with it. Will be trail only most likely.

PIG · 09-15-2003, 08:29 AM

Quote:

Originally posted by Bushwhacker
Would these work on a TJ trail buggy? Not sure how much it will weigh when I'm done with it. Will be trail only most likely.

We have a pre fabbed tj coil over kit that is just about done as far as production is concerned. We are just waiting for a couple of small parts to be finished up. Click HERE

Liftedassdodge · 09-15-2003, 09:48 AM

check your pms

fj40charles · 09-15-2003, 02:43 PM

Hey Pig,

What does this part do?

3.50" (.25" Collapsed) 2 LBS/IN HELPER PP-250HELPER

Thanks,
Charles

PIG · 09-15-2003, 04:45 PM

Quote:

Originally posted by fj40charles
Hey Pig,

What does this part do?

3.50" (.25" Collapsed) 2 LBS/IN HELPER PP-250HELPER

Thanks,
Charles

Its a tender coil used when guys use the shock for alot of down travel so the springs dont come unbound and clank around the shock body. It is a good idea to do it this way and not with a secondary coil because of the drastic change in spring rate.

PIG · 09-15-2003, 04:46 PM

Quote:

Originally posted by fj40charles
Hey Pig,

What does this part do?

3.50" (.25" Collapsed) 2 LBS/IN HELPER PP-250HELPER

Thanks,
Charles

pmed you back

fj40charles · 09-16-2003, 09:43 AM

Thanks for the info Pig..

PIG · 09-16-2003, 09:31 PM

Quote:

Originally posted by fj40charles
Thanks for the info Pig..

No problem dude.

fivetenben · 09-20-2003, 05:01 PM

PIG,

can you get and how much for the banged up part on the shock in the foreground of this pic? Its a 2" Fox coilover, but you could probably tell that. Thanks

Ben

PIG · 09-22-2003, 06:28 PM

Quote:

Originally posted by fivetenben
PIG,

can you get and how much for the banged up part on the shock in the foreground of this pic? Its a 2" Fox coilover, but you could probably tell that. Thanks

Ben

That replacement part is $25 bucks. It doesn't look that banged up though................. I've seen worse.

whitebrowithafro · 09-26-2003, 08:02 AM

PM'd ya

PIG · 09-29-2003, 06:04 PM

Quote:

Originally posted by whitebrowithafro
PM'd ya

Pmed ya back....

FYI, tomarrows the last day then they will go bact to $239

09-09-2003, 08:18 AM	#1 (permalink)
PIG Pirate4x4 Addict! Join Date: May 2001 Member # 4502 Location: SanLuisObispo, CA Posts: 5,142	Sway-A-Way Coil Over Shocks......... $199.99 Today, through the month of Sept. Sway-A-Way 2" diameter coil over emulsion shocks are on sale for $199.99 each. Sway-A-Way dual rate kits and Eibach coils sold separately. Eibach coils are GUARANTEED not to sag! As always, doing spring calculations to determine the CORRECT spring rates are always complimentary as well as our coil swapping program. Call for more info: 805-234-1760 To get the discount you must mention this add from PBB. Attached Images __________________ www.PolyPerformance.com Click the sig for everything you need to build a tube car www.SynergyMFG.com Cool stuff for your buggy, Jeep, Dodge 2500/3500 www.4130Clothing.com A unique apparel line geared for the off-road enthusiast Last edited by PIG; 09-09-2003 at 09:30 AM.

09-09-2003, 07:08 PM	#3 (permalink)
Yotaonly Toyota Addict Join Date: Feb 2002 Member # 9873 Location: Pacific NW Posts: 1,010	Shock Info Springs Nice deal PIG, I may have to give you a call this month, I don't need to pay the rent, right? __________________ '93 FZJ80 Family Hauler Crawler - OME Heavies - 4:88's - Tri-Locked - 37" BFG AT's '93 4Runner Project - 3.4l - R151 - 2.28 - 4.7 - FJ80 SAS - 4.88's - ARB's - 42" MTR's DD - '92 Celica GTS

09-10-2003, 08:07 AM	#6 (permalink)
broncorob Registered User Join Date: Nov 2001 Member # 8228 Location: Charlotte, NC Posts: 1,230	Hey Dave, Is there any reason to have a remote res shock on a rock buggy? I would assume no. On another note, I bent a shock shaft at EROCC that I'm gonna have to fix(I'll call ya later). Troy from the badlands hooked me up with a Fox shock. Why can't sway away do something to retain the lower coil cup like Fox Yeah I know, you don't design em you just sell em __________________ Rob Ellis

09-11-2003, 07:14 AM	#9 (permalink)
broncorob Registered User Join Date: Nov 2001 Member # 8228 Location: Charlotte, NC Posts: 1,230	Yeah, I'm interested in this too. Doubt I'll spend anymore money on my SAWs but I'd like to see. How hard is it to replace a shaft Dave? Also, on my old improperly setup under the bigbronco, the coils rubbed the shock body pretty badly when they came unseated. Now I cant screw the adjuster rings on and off. If you don't wanna post em will you PM me a price for the outside body of the shock(the part with the threads for the adjuster) and a single shaft for a 16" travel remres shock. __________________ Rob Ellis Last edited by broncorob; 09-11-2003 at 07:17 AM.

09-13-2003, 10:41 AM	#12 (permalink)
Bushwhacker Rock God Join Date: Jan 2002 Member # 9138 Location: Godfrey, IL Posts: 2,488	Would these work on a TJ trail buggy? Not sure how much it will weigh when I'm done with it. Will be trail only most likely. __________________ WEROCK Judge RROCK Legends Competitor 97 TJ buggy,4.0,727,Atlas,D60,14B Facebook myspace

09-09-2003, 05:13 PM	#2 (permalink)
INFAMOUSBUTCHER Banned Join Date: Mar 2003 Member # 18371 Location: MIDDLETOWN NORCAL Posts: 871	what length do these come in? 14 ? 16? both? do you have prices on springs?

09-10-2003, 08:07 PM	#8 (permalink)
pmurf1 Registered User Join Date: Dec 2000 Member # 2463 Location: Phoenix,az Posts: 2,927	PIG, Can you post a pic of your solution for the coil popping out at the bottom on the SAW's? It's a real pain in the ass to have to reseat that thing instead of wheeling. How much extra for this solution?

09-15-2003, 09:48 AM	#14 (permalink)
Liftedassdodge Registered User Join Date: Apr 2003 Member # 19014 Location: Danville, ca Posts: 282	check your pms

09-15-2003, 02:43 PM	#15 (permalink)
fj40charles Zeus of the Sluice Join Date: Oct 2000 Member # 1926 Location: Dallas, TX USA Posts: 3,255	Hey Pig, What does this part do? 3.50" (.25" Collapsed) 2 LBS/IN HELPER PP-250HELPER Thanks, Charles __________________ '69 FJ40 with very few stock parts. 2000 Cummins with some goodies to make it smoke..... Trail Gear's Bad Ethics=Bad Business.

09-16-2003, 09:43 AM	#18 (permalink)
fj40charles Zeus of the Sluice Join Date: Oct 2000 Member # 1926 Location: Dallas, TX USA Posts: 3,255	Thanks for the info Pig.. __________________ '69 FJ40 with very few stock parts. 2000 Cummins with some goodies to make it smoke..... Trail Gear's Bad Ethics=Bad Business.

09-20-2003, 05:01 PM	#20 (permalink)
fivetenben Registered User Join Date: Sep 2000 Member # 1710 Location: paradise, ca Posts: 473	PIG, can you get and how much for the banged up part on the shock in the foreground of this pic? Its a 2" Fox coilover, but you could probably tell that. Thanks Ben Attached Images

09-26-2003, 08:02 AM	#22 (permalink)
whitebrowithafro Registered User Join Date: Feb 2002 Member # 9761 Location: 127.3 miles from the Hammers! (SoCal) Posts: 2,412	PM'd ya __________________ DIRTBUILT INDUSTRIES - CNC plasma cutting, chassis plans, metal fabrication 'NO LIMIT CREW'

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode