Suspension Seat Sale

[JeepSWAG]

I'm getting questions about YJ's so here's a quote from really good / old post.

Originally Posted by oldjeep

In a YJ the stock seat bases have about a 15 degree tilt. I had to "adjust" them to a 7 degree tilt to get the seats to sit like stock. I only adjusted the drivers side, the passenger side didn't really matter.

If you just mount them to the stock bases/sliders, the front of the seats are pretty high and I felt like I was pushing down against them to hit the brakes. (I'm 6ft tall 185 lbs). The steering wheel was also really close to the front of the seat, I was touching both the steeringwheel and seat with my leg when sliding through. If you are short then there might be no problem with the steering wheel

Before on the left, after on right.


The red triangle represents the shape of the piece I cut out. I left the rearmost part uncut and just folded it down. The measurement was about 1.75" in the front.

[pages007]

price for a set of 795's in black to 83714? Thank You.

[Garfed]

Does anyone know if the "general adaptation" can work in '99 XJ. Show only thorugh 96 The expedition included 86 004 black and headrest

Rift Plat,RS Gold,Cheapest WOW Gold

[JeepSWAG]

the 649 and 650 look like the work for 84-02 XJ. Check this link: http://www.jeepswag.com/empi/Adapter...ers/index.html

Originally Posted by Garfed

Does anyone know if the "general adaptation" can work in '99 XJ. Show only thorugh 96 The expedition included 86 004 black and headrest

Rift Plat,RS Gold,Cheapest WOW Gold

[JeepSWAG]

pm sent

Originally Posted by Garfed

Does anyone know if the "general adaptation" can work in '99 XJ. Show only thorugh 96 The expedition included 86 004 black and headrest

Rift Plat,RS Gold,Cheapest WOW Gold

[lil bax]

quote on pair of black cloth high backs and adapters for a 84 toyota

[crewchief]

Need a price for 2 seats shipped to 83873 the cheapest ones you have i dont care the color or the style just let me know what ya got! Garrett

[JeepSWAG]

139 for a pair of low back tan. Shipping 75

PM sent.

Originally Posted by crewchief

Need a price for 2 seats shipped to 83873 the cheapest ones you have i dont care the color or the style just let me know what ya got! Garrett

[Deadman 94 xj]

I sent you a PM with a question. The seats are doing great BTW.

[biggin69]

Do you have the wide hi backs black on black (794) in stock? Price? Thanks!

[JeepSWAG]

Sure do.

Originally Posted by biggin69

Do you have the wide hi backs black on black (794) in stock? Price? Thanks!

[mopartim]

do you have anything in black with cloth? looking for a pair of hi backs

[JeepSWAG]

I hope to have black high backs, in about four months. I may do some dark gray too.

Originally Posted by mopartim

do you have anything in black with cloth? looking for a pair of hi backs

[mopartim]

dark gray depending on the shade of the color would be even better ..... do you have a preorder list started ? if you contact me when they are in i will buy a set

[f-4x4]

can i get a price shipped on a single grey cloth seat shipped to 37840

[WheelinOK]

Originally Posted by JeepSWAG

The black clearance seats are gone and will not be made any more. I have some others in the $299 to $320 price range. If you're interested, shoot me an email and I'll send you details.

Is that for a pair? What about some wides shipped to 74101? Also will the wides fit in a 05 TJ or should I go on a diet?

[JeepSWAG]

Originally Posted by WheelinOK

Is that for a pair? What about some wides shipped to 74101? Also will the wides fit in a 05 TJ or should I go on a diet?

Wide seats are $310 to $320 and most colors are still available.

Not certain about putting the wides into a TJ. My webpage has measurements. You'll need an adapter bracket set for a TJ too.

PM sent.

[JeepSWAG]

Yes per pair.

Originally Posted by WheelinOK

Is that for a pair? What about some wides shipped to 74101? Also will the wides fit in a 05 TJ or should I go on a diet?

[JeepSWAG]

PM sent.

Originally Posted by f-4x4

can i get a price shipped on a single grey cloth seat shipped to 37840

[gp_frk]

Thanks for the quick PM reply,

I have a few more questions I figured the masses may have as well so I thought I'd toss them out here.

I know you are out of the clearance seats in anything but tan but you mentioned having others in gray available. Can i get some details on these?
Are they the same seats just no longer at the discounted price?
Also what type of mounts are they vertical tab or flat like the clearance seats were?
And lastly can I mix and match like one hi back and one low back on an order without affecting the per pair price?

Thanks,

Gary

[JeepSWAG]

Here's a good starting point, to show other seats that I sell at great prices: http://www.empius.com/vwcatalog/2011/333.html

Page 333 - 336 show the current seats available from EMPI. Prices range from $300 to $345 per pair of seats. Shipping is $75 per pair.

Unlike the clearance seats, these are all vertical tab style and I sell brackets that convert them to flat.

If interested, post up and I'll send pricing over.

Originally Posted by gp_frk

Thanks for the quick PM reply,

I have a few more questions I figured the masses may have as well so I thought I'd toss them out here.

I know you are out of the clearance seats in anything but tan but you mentioned having others in gray available. Can i get some details on these?
Are they the same seats just no longer at the discounted price?
Also what type of mounts are they vertical tab or flat like the clearance seats were?
And lastly can I mix and match like one hi back and one low back on an order without affecting the per pair price?

Thanks,

Gary

[Malkey]

Originally Posted by JeepSWAG

I'm getting questions about YJ's so here's a quote from really good / old post.

I have a CJ7 with tilting frames (I believe the same as wranglers) and just finished hacking the front bars to bring the tilt down. I took the short portions that I removed and booger welded them on the backs to help strengthen the initial booger welds









The shortened front bars actually make the top of the seat tilt farther forward so it's more out of the way. I like it

[JeepSWAG]

Nice Mod.

Thanks for posting.

Originally Posted by Malkey

I have a CJ7 with tilting frames (I believe the same as wranglers) and just finished hacking the front bars to bring the tilt down. I took the short portions that I removed and booger welded them on the backs to help strengthen the initial booger welds









The shortened front bars actually make the top of the seat tilt farther forward so it's more out of the way. I like it

[kmkommes]

Mastercraft Baja RS Driver and Pass in Black Black to Neenah WI 54956.
Also include rear seat cover for 99 TJ.

Thanks

Send me PM please.

[JeepSWAG]

Not sure where to start;

No Mastercraft

No reclining seats

No Black

No rear seat covers

I have brackets for a TJ at $50 for two seats.

Originally Posted by kmkommes

Mastercraft Baja RS Driver and Pass in Black Black to Neenah WI 54956.
Also include rear seat cover for 99 TJ.

Thanks

Send me PM please.