4" Turbo Back 14 Ga. Aluminized Diesel Exhaust $300 - Pirate4x4.Com : 4x4 and Off-Road Forum
 
Pirate4x4.Com : 4x4 and Off-Road Forum  

Go Back   Pirate4x4.Com : 4x4 and Off-Road Forum > Vendor's Marketplace > Motor/Tranny/T-Case Performance
Notices

Reply
 
Share Thread Tools Display Modes
Old 10-13-2004, 04:33 PM   #1 (permalink)
Registered User
 
Join Date: May 2003
Member # 19652
Location: so cal
Posts: 1,193
Send a message via AIM to socalchef
4" Turbo Back 14 Ga. Aluminized Diesel Exhaust $300

I'm not a big vendor, in fact, i'm not a vendor at all. I bought my star to support the board as it's saved me way more money then what it cost for the star. Eventually I hope to hock my shirts to you, but not today. Today I just want to share a good deal.

I found T&J Diesel Performance on ebay, and met him last night to pick up my exhaust and found out he's a rock crawler, we got to talking and I've offered to work with him to sell some kits on here. I'm extremely happy with the transaction and hope to pass on the deals to you guys. I'll even get before and after audio for you guys with my Dodge as well as lots of pictures of the installed product.

Lifetime Warranty to the original owner, at an additional $49.00 I will add a Polished Stainless Steel Exhaust Tip.* It is a clamp-on, 15" in length with a rolled end that has a 30 degree slashcut.* It is manufactured by Cone engineering and is about 65 thousands thick.*

All clamps and hangers are included.

94-02 Dodge 5.9 CTD, any bed any cab configuration
99-Present Super Duty - Ford 7.3 L &*Turbo Back System for Ford*6.0 L Powerstroke Diesels 1999 & newer, F-250, F-350,F-450, Excursions & Duallys
00-Present Chevy/GM 6.6 Duramax

All systems are in stock and ready to ship. Shipping runs about $55, and these are big and heavy so it's a good deal. If you're local to Orange County, CA you can pick them up. Feel free to ask me questions or call Tom at 714-993-3860 from 8 am to 5 pm*Pacific Standard Time.

PM me or call Tom for any special requests, ie 5" or dual exhaust.

Be Sure to Mention the Pirate Special!


__________________
Shaffers Diablo Sport chassis on a 4.0L YJ frame
Read the buildup at http://www.abendig.com
socalchef is offline   Reply With Quote Quick reply to this message
Old 10-14-2004, 12:00 PM   #2 (permalink)
4x4 Consultant
 
UGET IT's Avatar
 
Join Date: Feb 2000
Member # 227
Location: Folsom Ca.
Posts: 6,137
I need a system like this one that will fit a 92 Dodge Cummins.......

Can you help me out?

Please PM with and answer!
__________________
Email: kevin@methodmotorsports.net
WWW.METHODMOTORSPORTS.NET

Special Thanks to YUKON, BAJA DESIGNS.
UGET IT is offline   Reply With Quote Quick reply to this message
Sponsored Links
Old 10-14-2004, 12:34 PM   #3 (permalink)
Registered User
 
Join Date: May 2003
Member # 19652
Location: so cal
Posts: 1,193
Send a message via AIM to socalchef
i'll see what i can do for you
__________________
Shaffers Diablo Sport chassis on a 4.0L YJ frame
Read the buildup at http://www.abendig.com
socalchef is offline   Reply With Quote Quick reply to this message
Old 10-17-2004, 02:02 PM   #4 (permalink)
Registered User
 
Scooterloo's Avatar
 
Join Date: Jan 2004
Member # 26149
Location: nor cal
Posts: 1,192
X2 on the 92 cummins, (long bed standard cab 4x4) thanks
Scooterloo is offline   Reply With Quote Quick reply to this message
Old 10-18-2004, 01:05 AM   #5 (permalink)
Registered User
 
Join Date: May 2003
Member # 19652
Location: so cal
Posts: 1,193
Send a message via AIM to socalchef
unfortunately guys, he doesn't have access to kits for the 92's, just 94 and up. i'm going to search around though and try to find a good deal on one somewhere for you.
__________________
Shaffers Diablo Sport chassis on a 4.0L YJ frame
Read the buildup at http://www.abendig.com
socalchef is offline   Reply With Quote Quick reply to this message
Old 10-18-2004, 09:01 AM   #6 (permalink)
Registered User
 
Join Date: Jan 2003
Member # 16192
Location: Nashville, TN
Posts: 352
So how much for this exhaust for a 01 CTD. Are these aluminized Magnaflow exhausts, or just a magnaflow muffler. Are the clamps welded on the pipes, or are they on the hangers. Do you have any pics of this installed.


For the guys asking about the 1st gen exhausts, the best prices I've seen is on www.bigexhaust.com The price may be a little lower if you actually call to order (I was quoted a lower price than the site when I called).

socalchef, get back to me about the questions when you have time.

Thanks
JRowe is offline   Reply With Quote Quick reply to this message
Old 10-18-2004, 04:17 PM   #7 (permalink)
Registered User
 
Join Date: May 2003
Member # 19652
Location: so cal
Posts: 1,193
Send a message via AIM to socalchef
$355 shipped to you. It's a Magnaflow muffler, with clamps with hangers welded to them. I've been trying to get to installing mine but i'm in the middle of reworking the floor of my Jeep to fit the Atlas better. I should have pics/audio in two days. Might be able to do it tonight.
socalchef is offline   Reply With Quote Quick reply to this message
Old 10-18-2004, 04:44 PM   #8 (permalink)
Registered User
 
Join Date: Jan 2003
Member # 16192
Location: Nashville, TN
Posts: 352
Is that price with the tip? Does it have a 3.5" downpipe or a true 4"

Can you post a pic of the full system (or send me one), non installed is fine.

Thanks
JRowe is offline   Reply With Quote Quick reply to this message
Old 11-07-2004, 10:14 PM   #9 (permalink)
Registered User
 
Join Date: May 2003
Member # 19652
Location: so cal
Posts: 1,193
Send a message via AIM to socalchef
Sorry for taking so long, but, as I've said, I'm not doing this for a living, just sharing a source. I finally got a chance to get the exhaust installed and take a pic. No pics installed, it was getting dark by the time I was done. I also got some video of the exhaust sound. This is on my bone stock 99 CTD. The turbo definitely spools up faster. If you go this route and get this exhaust, I would only recommend that you don't tighten down the straps right away when installing it. slip all the parts together and then once everything fits right go through and tighten up all the ubolts/straps on the overlaps. I slid the tube all the way together and knowing I would probably regret it, tightened everything down. I was about 2" too short at the back and had to tear it down. Not a big deal but the ubolts/straps crimp the tube and made it hard to disassemble...wahh... anyhow, everything fit great, I've got some extra tube sticking out of the back that I'll cut down when I install the (optional) tip. Very happy with it, and for the price $355 shipped, no way it can be beat

Video
__________________
Shaffers Diablo Sport chassis on a 4.0L YJ frame
Read the buildup at http://www.abendig.com
socalchef is offline   Reply With Quote Quick reply to this message
Reply

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the Pirate4x4.Com : 4x4 and Off-Road Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.

** A VERIFICATION EMAIL IS SENT TO THIS ADDRESS TO COMPLETE REGISTRATION!! **

Email Address:

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -7. The time now is 10:41 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 ©2011, Crawlability, Inc.