International D-20 stainless twin-stick W/boot $119 - Pirate4x4.Com : 4x4 and Off-Road Forum

JB Custom Fab. · 01-08-2006, 08:30 PM

JB Custom Fabrication has been making stainless twin-sticks since 1998.We have increased our product line from early Broncos, to include Jeep, and International.
We take pride in building quality products

International Scout D-20 stainless steel twin-stick shifter

All threaded parts are done on a CNC machine, all bends are done on a bending machine, all welded parts are jig welded

These shifters are designed to be rock-solid you won't find any "one size fits all" bunch of hole-punched bar stock held together with ny-lock nuts that are not designed for heat. We use only, all metal, mechanical self-locking hardware (un-like the chinese stuff).

This shifter comes with installation / adjustment instructions, boot, chrome ring, and even stainless steel screws to finish it off!

Note: This shifter only fits the International D-20

Note: Not all installations / applications are the same, some floor trimming or shifter adjustment might be nessasary.

Shipping is actual charge (No B.S. packaging / handling fees)

To purchase visit our Ebay webstore

4x401cj · 01-08-2006, 08:48 PM

Sure would like to see a set for CJ Dana 20`s. When are they coming?

JB Custom Fab. · 01-09-2006, 08:33 PM

We are fabing up the prototype right now.

Rusty Escandell · 01-10-2006, 04:58 PM

Would this shifter kit work on a IH D300? or are you making any yet?
Thanks

JB Custom Fab. · 01-15-2006, 07:20 PM

Yes it will fit the IH Dana 300.
We do have a shifter just for the IH D-300, the differance is the was the handles are bent (to closely match the stock shifters locations)

Jon

01-08-2006, 08:30 PM	#1 (permalink)
JB Custom Fab. www.jbfab.net Join Date: Nov 2005 Member # 62303 Location: Salem, Oregon Posts: 268	International Scout D-20 stainless twin-stick W/boot $119 JB Custom Fabrication has been making stainless twin-sticks since 1998.We have increased our product line from early Broncos, to include Jeep, and International. We take pride in building quality products International Scout D-20 stainless steel twin-stick shifter All threaded parts are done on a CNC machine, all bends are done on a bending machine, all welded parts are jig welded These shifters are designed to be rock-solid you won't find any "one size fits all" bunch of hole-punched bar stock held together with ny-lock nuts that are not designed for heat. We use only, all metal, mechanical self-locking hardware (un-like the chinese stuff). This shifter comes with installation / adjustment instructions, boot, chrome ring, and even stainless steel screws to finish it off! Note: This shifter only fits the International D-20 Note: Not all installations / applications are the same, some floor trimming or shifter adjustment might be nessasary. Shipping is actual charge (No B.S. packaging / handling fees) To purchase visit our Ebay webstore __________________ JB Custom Fabrication Made in America (by Americans)

01-09-2006, 08:33 PM	#3 (permalink)
JB Custom Fab. www.jbfab.net Join Date: Nov 2005 Member # 62303 Location: Salem, Oregon Posts: 268	We are fabing up the prototype right now. __________________ JB Custom Fabrication Made in America (by Americans)

01-10-2006, 04:58 PM	#4 (permalink)
Rusty Escandell Registered User Join Date: Feb 2005 Member # 43810 Location: Satellite Beach, FL Posts: 64	twin stick Would this shifter kit work on a IH D300? or are you making any yet? Thanks __________________ Rusty Escandell Satellite Beach, FL 71 Scout 800b, 392 cid, tf727 with jp tailshaft & housing, jp d300, full width d44/d60 (looking for a frt d60), RS SOA 44"/54" springs, Super Swamper 42" TSL, 12bolt H1 bead locks and more coming

01-15-2006, 07:20 PM	#5 (permalink)
JB Custom Fab. www.jbfab.net Join Date: Nov 2005 Member # 62303 Location: Salem, Oregon Posts: 268	Yes it will fit the IH Dana 300. We do have a shifter just for the IH D-300, the differance is the was the handles are bent (to closely match the stock shifters locations) Jon __________________ JB Custom Fabrication Made in America (by Americans)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-08-2006, 08:48 PM	#2 (permalink)
4x401cj Registered User Join Date: Oct 2004 Member # 37244 Location: Gresham, Oregon Posts: 1,021	Sure would like to see a set for CJ Dana 20`s. When are they coming?