yz125 $650 SE Arizona - Pirate4x4.Com : 4x4 and Off-Road Forum

b-dogg · 08-17-2008, 02:53 PM

FMF suspension, FMF pipe, factory fx plastic, boat load of tires all in good shape,two paddle tires, 2 chest plates, and an xl helmet.

I traded a big stereo system off for it as a project but it needs a new head. It will run with a new O-ring but the head is warped and the O-ring blows out after awhile. I bought a buggy and it takes up all my time now, plus kids money etc. Anyhow I would trade it for a trailer I can drive my buggy on (nothing fancy) I might even come with some cash.

This is how I got it and how it sits

weridodude13 · 08-20-2008, 10:47 AM

What year is it? Would be OK with just a new head, or does the motor need more work?

b-dogg · 08-20-2008, 11:17 AM

It will run like it is with a new O-ring, so I'd say it just needs at the lest a used head. However I'd go with a new piston and a used machined head. I'd hate to do the work twice. One mechanic even said he thought he could re surface the head but I was afraid that the weld wouldn't last long and he agreed. Long story short the head cracked (out side only)and somebody welded it which warped the flat surface on top the head. The cylinder is still good/water cooled.
Also I don't have a title but will do a bill of sell. I'm not sure on the year I'm the third owner and have to much junk to remember what year it is. I can PM you the Vin numbers in the next few days if your interested. One other thing the fenders are a bit beat up and the plastic does have the normal scratches/pin strips. I also forgot to list some other riding gear I have Thor boots s13 and some elbow pads. I'll get some more pics up but the bike is at a friends while I'm moving.

Miltsmuscle · 08-22-2008, 06:04 AM

Yea Pm me the Num's if you would. I am in Queen Creek Az -- where is the bike at? It might be eazier to look at it instead.

b-dogg · 08-22-2008, 09:09 AM

The bike is in sierra vista but I'm going to get it and bring it to tucson tomorrow. I got an add on craiglist and a couple people want to see it. I haven't got back to them yet because they are in Tucson and the bike isn't. So the plan is to shoot down there tomorrow in my car and come back with the truck and then start letting people look at the bike. LMK

b-dogg · 08-28-2008, 08:28 PM

First $500 cash takes it. I had 3 people off "craiglist" want to look at it all no shows

08-17-2008, 02:53 PM	#1 (permalink)
b-dogg Registered User Join Date: Dec 2006 Member # 83201 Location: Tucson az Posts: 259	yz125 $650 SE Arizona FMF suspension, FMF pipe, factory fx plastic, boat load of tires all in good shape,two paddle tires, 2 chest plates, and an xl helmet. I traded a big stereo system off for it as a project but it needs a new head. It will run with a new O-ring but the head is warped and the O-ring blows out after awhile. I bought a buggy and it takes up all my time now, plus kids money etc. Anyhow I would trade it for a trailer I can drive my buggy on (nothing fancy) I might even come with some cash. This is how I got it and how it sits Last edited by b-dogg; 08-20-2008 at 11:20 AM.

08-20-2008, 10:47 AM	#2 (permalink)
weridodude13 Registered User Join Date: Mar 2002 Member # 10410 Location: Houston, TX Posts: 224	What year is it? Would be OK with just a new head, or does the motor need more work? __________________ '91 YJ "Short Bus"

08-20-2008, 11:17 AM	#3 (permalink)
b-dogg Registered User Join Date: Dec 2006 Member # 83201 Location: Tucson az Posts: 259	It will run like it is with a new O-ring, so I'd say it just needs at the lest a used head. However I'd go with a new piston and a used machined head. I'd hate to do the work twice. One mechanic even said he thought he could re surface the head but I was afraid that the weld wouldn't last long and he agreed. Long story short the head cracked (out side only)and somebody welded it which warped the flat surface on top the head. The cylinder is still good/water cooled. Also I don't have a title but will do a bill of sell. I'm not sure on the year I'm the third owner and have to much junk to remember what year it is. I can PM you the Vin numbers in the next few days if your interested. One other thing the fenders are a bit beat up and the plastic does have the normal scratches/pin strips. I also forgot to list some other riding gear I have Thor boots s13 and some elbow pads. I'll get some more pics up but the bike is at a friends while I'm moving. Last edited by b-dogg; 08-20-2008 at 11:33 AM.

08-22-2008, 09:09 AM	#5 (permalink)
b-dogg Registered User Join Date: Dec 2006 Member # 83201 Location: Tucson az Posts: 259	The bike is in sierra vista but I'm going to get it and bring it to tucson tomorrow. I got an add on craiglist and a couple people want to see it. I haven't got back to them yet because they are in Tucson and the bike isn't. So the plan is to shoot down there tomorrow in my car and come back with the truck and then start letting people look at the bike. LMK Last edited by b-dogg; 08-22-2008 at 09:09 AM.

08-28-2008, 08:28 PM	#6 (permalink)
b-dogg Registered User Join Date: Dec 2006 Member # 83201 Location: Tucson az Posts: 259	First $500 cash takes it. I had 3 people off "craiglist" want to look at it all no shows Last edited by b-dogg; 08-28-2008 at 08:29 PM.

08-22-2008, 06:04 AM	#4 (permalink)
Miltsmuscle Registered User Join Date: Jun 2007 Member # 94595 Location: Arizona Posts: 21	Yea Pm me the Num's if you would. I am in Queen Creek Az -- where is the bike at? It might be eazier to look at it instead.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode