which tires? - Pirate4x4.Com : 4x4 and Off-Road Forum

scott0000 · 07-27-2009, 08:03 AM

racing a heavy truck(3700 lb) with heavy nitrous paddles are legal wanting something in the 35" to 44" range

Train Horn · 07-27-2009, 10:42 AM

Dude your leaving out alot of details here

No comprendo

mustange70 · 07-27-2009, 11:08 AM

3700lbs is actually light (unless you race rails), but whats the rig, what motor (and hp), are cuts allowed, what else are you racing, is it deep mud or not much to it at all?

scott0000 · 07-27-2009, 11:55 AM

4 link rig. 950 on motor leaving on a transbrake and on 300 hp nitrous and plan on puttin 250hp on .1 or.2 seconds out. Cuts are legal and so are paddles.the mud is 2 ft. deep but usually a decent starting line

Belooky · 07-27-2009, 01:21 PM

Skat Trak "Bigger Digger's". 2.25"s of tread depth. 1-800-969-7528

07-27-2009, 08:03 AM	#1 (permalink)
scott0000 Registered User Join Date: Apr 2009 Member # 133962 Posts: 3	which tires? racing a heavy truck(3700 lb) with heavy nitrous paddles are legal wanting something in the 35" to 44" range

07-27-2009, 10:42 AM	#2 (permalink)
Train Horn Registered User Join Date: Dec 2008 Member # 124760 Location: Florida Posts: 1,306	Dude your leaving out alot of details here No comprendo Last edited by Train Horn; 07-27-2009 at 10:43 AM.

07-27-2009, 11:08 AM	#3 (permalink)
mustange70 Registered User Join Date: Jan 2005 Member # 41097 Location: Calgary Posts: 2,109	3700lbs is actually light (unless you race rails), but whats the rig, what motor (and hp), are cuts allowed, what else are you racing, is it deep mud or not much to it at all? __________________ 90' C350 AKA 4 door 1 ton Bronco 96' Ranger: kings, EMF parts, 800hp SBF

07-27-2009, 01:21 PM	#5 (permalink)
Belooky Quit looking Join Date: Jun 2009 Member # 138061 Location: Left of the ocean and right of the mountains Posts: 518	Skat Trak "Bigger Digger's". 2.25"s of tread depth. 1-800-969-7528 __________________ Altman's Racing 1996 f250 D60, 10.25, 557bbf, bottle fed by giggle gas

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-27-2009, 11:55 AM	#4 (permalink)
scott0000 Registered User Join Date: Apr 2009 Member # 133962 Posts: 3	4 link rig. 950 on motor leaving on a transbrake and on 300 hp nitrous and plan on puttin 250hp on .1 or.2 seconds out. Cuts are legal and so are paddles.the mud is 2 ft. deep but usually a decent starting line