Will a normal v6 3rd fit into a t100 axle? - Pirate4x4.Com : 4x4 and Off-Road Forum

adamwende · 02-02-2012, 03:55 PM

I've used the search button... for a few days now. There is a lot of misleading info on what fits what. Doing the search i learned a ton about ratios and such... but couldn't find a solid answer on if the v6 3rd will fit into the t100 housing. From what i read it wont work the other way around. (t100 3rd into a v6 housing)

Can anyone shine some light on this?

adamwende · 02-03-2012, 08:29 AM

Nobody knows anything on this?

Toyoland66 · 02-03-2012, 08:54 AM

Pretty sure the T100 uses a 8.4"

Pull the third, if it has cap girdles its an 8.4

DWT · 02-03-2012, 09:10 AM

Even the supposed 8.4" is swappable with an 8" 3rd. The bolt pattern on the later 8.4" is slightly larger but drilling the flange slightly oversized will let it work.

Edit: Besides that the t100 most likely has a standard mini 3rd anyway. The 8.4 is a later design the tundra came out shortly after its entrance into the market.

adamwende · 02-07-2012, 03:40 PM

Thanks for the info guys, im wanting to get the 4.88 3rd from a auto runner, and put them in a t100 rear end, just to get the width.

Peterbuilt84 · 02-07-2012, 03:52 PM

http://home.4x4wire.com/erik/diffs/

02-02-2012, 03:55 PM	#1 (permalink)
adamwende Wheeler Join Date: Jun 2011 Member # 193461 Location: It's hot... AZ Posts: 205	Will a normal v6 3rd fit into a t100 axle? I've used the search button... for a few days now. There is a lot of misleading info on what fits what. Doing the search i learned a ton about ratios and such... but couldn't find a solid answer on if the v6 3rd will fit into the t100 housing. From what i read it wont work the other way around. (t100 3rd into a v6 housing) Can anyone shine some light on this?

02-03-2012, 08:54 AM	#3 (permalink)
Toyoland66 Bootyfab Technician Join Date: Sep 2004 Member # 35163 Location: Colorado Posts: 834	Pretty sure the T100 uses a 8.4" Pull the third, if it has cap girdles its an 8.4 __________________ 1979 FJ40

02-03-2012, 09:10 AM	#4 (permalink)
DWT Dirty WHITE TRASH Join Date: May 2003 Member # 19850 Location: Eastern WA Posts: 3,573	Even the supposed 8.4" is swappable with an 8" 3rd. The bolt pattern on the later 8.4" is slightly larger but drilling the flange slightly oversized will let it work. Edit: Besides that the t100 most likely has a standard mini 3rd anyway. The 8.4 is a later design the tundra came out shortly after its entrance into the market. __________________ Polaris 800 triple powered Odyssey. 150 hp of death underway. Taiwanese Garbage should stay in Taiwan. Last edited by DWT; 02-03-2012 at 09:13 AM.

02-07-2012, 03:52 PM	#6 (permalink)
Peterbuilt84 Wheeler Join Date: Dec 2009 Member # 148659 Location: Prunedale/ San Luis Obispo Posts: 396	http://home.4x4wire.com/erik/diffs/ __________________ Peter 84 Toy lifted, locked, duals Polygoats

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-03-2012, 08:29 AM	#2 (permalink)
adamwende Wheeler Join Date: Jun 2011 Member # 193461 Location: It's hot... AZ Posts: 205	Nobody knows anything on this?

02-07-2012, 03:40 PM	#5 (permalink)
adamwende Wheeler Join Date: Jun 2011 Member # 193461 Location: It's hot... AZ Posts: 205	Thanks for the info guys, im wanting to get the 4.88 3rd from a auto runner, and put them in a t100 rear end, just to get the width.