Tj auto to 300 - Pirate4x4.Com : 4x4 and Off-Road Forum

dlc · 01-12-2004, 08:12 PM

What is involved in puting a dana 300 to a 4 cylander automatic TJ?

Shades76cj5 · 01-13-2004, 04:32 PM

www.advanceadapters.com

The Rockslut · 01-13-2004, 05:05 PM

A clocking ring and install it. Had a D300 behind my 94 YJ auto (999) same thing.

MountaineerMac · 01-13-2004, 07:37 PM

Not only will you need a clocking ring (unless you plan to trim your tranny output shaft) you need to purchase a flip kit from Down East Offroad, or build one yourself - unless you're planning an axle swap that involves a pass. drop diff. There is a good bit of info here on the board for doing the swap. I swapped a 300 into my XJ, and there's a good bit of time and effort involved.

01-12-2004, 08:12 PM	#1 (permalink)
dlc Registered User Join Date: Jun 2003 Member # 20498 Location: Blue Ridge GA Posts: 498	Tj auto to 300 What is involved in puting a dana 300 to a 4 cylander automatic TJ? __________________ 92 YJ, TBI 350, 700R4, Dana 300, 1 tones, 39" Krawlers SAVE TELLICO RALLY post #15

01-13-2004, 04:32 PM	#2 (permalink)
Shades76cj5 Registered User Join Date: Jan 2004 Member # 26083 Location: Boise, Id Posts: 68	www.advanceadapters.com __________________ All right you Mother Stickers, this is a Fuck up! Raise your Balls or I'll Blow your hands off!

01-13-2004, 05:05 PM	#3 (permalink)
The Rockslut Registered User Join Date: Jun 2001 Member # 5021 Location: Lincoln, CA Posts: 5,967	A clocking ring and install it. Had a D300 behind my 94 YJ auto (999) same thing. __________________ Don't be "THAT GUY" on the trail. www.voodoowax.com

01-13-2004, 07:37 PM	#4 (permalink)
MountaineerMac Registered User Join Date: Feb 2002 Member # 10068 Posts: 648	Not only will you need a clocking ring (unless you plan to trim your tranny output shaft) you need to purchase a flip kit from Down East Offroad, or build one yourself - unless you're planning an axle swap that involves a pass. drop diff. There is a good bit of info here on the board for doing the swap. I swapped a 300 into my XJ, and there's a good bit of time and effort involved. __________________ <>< '98 XJ - 3/4ton - D300 4:1 - 39.5" IROKs - cage [URL=http://www.rockmonkey4x4.com]RockMonkey 4x4[/URL] '04 PSD - Tow Rig

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode