|Yesterday 09:56 AM|
two 2.5 rockwell front axles /$1500 pair
I have a pair or 2.5 rockwell top loaders. I have other parts too. located in kansas. Can help ship at buyers expense call or text 620-960-3272
|03-23-2015 02:18 PM|
|03-22-2015 09:36 PM|
|03-18-2015 07:26 PM|
|03-18-2015 07:24 PM|
I saw a wanted ad on Facebook from someone in DIXON IL looking for these. Awaiting the join on the group, but hopefully he posts here...
Schoenfeld truck and tractor pull headers for BBC - Trucks Gone Wild Classifieds, Event Information and Mud News
Schoenfeld truck and tractor pull headers for BBC
p/n 2517-E 409.95 new
Ran on a 1100hp bbc with zero issues and they sound great.
$150 shipped to your door in the lower 48 states and I have paypal as well.
MSD Pro-Billet Distributors p/n 85551 for Chevy SBC, BBC with Bronze gear and a brand new cap!($50 value)
Ready to run with all MSD or other GM ignitions. All you need is your box and a coil. Simple two wire hookup.
Mechanical advance and bronze gear which is the only choice for billet solid roller cam setups.
1/4" steel Chevy pattern midplate. SBC or BBC
Just under 30" in width (fit frame 30" inside to inside)...
$100 shipped to the lower 48 states. I have paypal.
|03-17-2015 09:34 AM|
Tires: 4 39" x 15" Iroks & Inner Air Locks - Great Lakes 4x4. The largest offroad forum in the Midwest
|03-15-2015 07:21 PM|
05 LJ tub and frame
|03-15-2015 07:19 PM|
Ford 8.8 with TJ brackets, discs, 31 spline
|03-15-2015 08:38 AM|
NP 241 DLD t case for parts
Came out of a 99 cummins with an auto. The case is cracked from top to bottom on the front half and started to on the back half. Its a jasper rebuild with around 20k miles on it. Cracked in my driveway when i put in 4wd and then took it out right away. Still worked to get it in the garage. Would be great if you have a empty case or wanting to rebuild yours. Make me an offer and come get it before i scrap it.
Located in St. John, IN 46373
|03-13-2015 03:44 PM|
'84 FJ 60
-has 150ish on it. Runs/drives in yard, haven't driven on road due to brake lines rotted.... everything available EXCEPT: steering box, steering shaft, column and rear heater. Everything else is up for grabs. It was originally from PA, but lived in WI as a plow truck, so its rusty. Ill keep it around for the next 2 weeks, then its going to scrap.
Its white w/brown interior... Chrome steel wheels, tires mismatched and shot
6o8.two9three4five1four for pics
|03-13-2015 11:44 AM|
chevy parts for sale dwight il 60420
205 for 4 spd 200$ bolt on yoke
dana 60 spring plates 50$ will ship
400 208 round adapter 100$ will ship
10 bolt alum cover 50 $ ship ship
ho 72 14 bolt 200 $ 410 welded or 456 welded
t case adapters will ship 350 700 208 50 $ 350 203 100 $ jeep t 176 to d 300 75 $
465 205 with sleeve 75 $ will ship
|03-09-2015 05:28 PM|
Dana 70HD center section. Was out of a 10 lug P30 box truck. 4.56 gears, open 35 spline carrier, 1410 or 1480 yoke not sure, 4" thick wall tube. 44" wide. Perfect for that Jana76 project you've been wanting to do. $150 located in Virden, 20 minutes south of Springfield. Looking for some 16 or 16.5 8x6.5 wheels.
|03-07-2015 08:15 PM|
1956 Willys Pickup 4x4
selling my willys truck. You can find more info on my ebay ad. You can either PM me on here or through ebay to make an offer, otherwise feel free to bid on ebay against everybody else!
Willys Pickup Truck 4x4 | eBay
|03-04-2015 11:47 AM|
Art Carr/ Winters shifter for a ford c6 automatic transmission. This is the rockgate design which allows you to go from forward to reverse with one straight shot. Good for rock crawling and spots where quick forward and reverse is needed.
Art Carr / Winters shifters are extreme shifters built for racing, street competition, or off-road use.
The superb shifter design packs many advantages, the Winter's shifter is virtually impossible to jam or spring. It is made with heavy metal gates and is precision engineered to enable fast positive shifts without missing a shift.
Art Carr / Winters has equipped this unit with a strong marine grade cable and all the necessary mounting hardware for easy installation. The Art Carr / Winters Shifter not only performs well... it looks good too.
15” long x 5” wide x 11” tall
All Winter's shifters include basic shifter, 5 ft. cable and necessary hardware to mount to the transmission. The black plastic housing is included.
Art Carr / Winters Shifter Ford C6
Never installed like new
Email or call/text 3zero9-6seven8-8six3four
|03-03-2015 04:35 AM|
2007 yamaha yz450f limited edition
Full fmf exhaust
Factory connection suspension valved for
170lb B class MX rider
New chain guides
Newer chain and sprockets
Hammerhead case saver
Kibble White stainless valves and springs
40 hrs on top end replaced with factory yamaha parts
I bought this bike new in 2007 and it has always been well maintained. Good title also
Email or call 3zero9-6seven8-8six3four
2007 Yamaha YZ450f
|03-01-2015 12:46 PM|
|sgt. slaughter||dana 60 front. king pin,high pinion,driver side drop,complete hub to hub. including brakes,steering and sway bar. out of 88-91.5 f350. srw. 800 obo possible trades considered. 216-256-5403 russell. near cleveland ohio|
|02-20-2015 02:04 PM|
4 36x13.5x20 radial Iroks, E rated, good spares or trail tires. 2 have lower tread than the other two. It is what it is. Trades possible for 35-37" swampers for 17" wheels. Located south of Springfield IL. $200 obo.
01-10 Duramax PPE standard programmer, used lightly for a few months, went to a 13 truck, 40-225hp/100-335lb ft tunes, many features. Great condition, comes with case, cord, and tuner. Asking $500.
|02-16-2015 09:49 PM|
35 Bogger's for sale:
05-11 Superduty Dana 60
Selling the trail rig, building a mega truck. Lettering will be removed and negotiable on price.
99-04 Superduty D60 & Sterling 10.5, 4.10 ratio was told, havent checked. $1000
|02-09-2015 01:59 PM|
2007 YZ450f in central illinois
2007 Yamaha YZ450f
|01-31-2015 02:42 PM|
2014 Ram 2500 20" takeoff wheel/tires
Set of 4 Firestone TransForce ATs - 7300 miles on them, and came off my 2014 2500 ram. Tires / rims / TPMS included - no leaks, patches, plugs, etc - upgraded to bigger tires and smaller rims.
285/60R20 tire size on stock 20" ram 8 lug rims.
Located in Cascade, WI -- approx. 40min north of Milwaukee
Guess I would rate them around 75% tread left compared to the stock tire under my truck.
Can possbily drive to meet someone within an hour or so of my location.
|01-24-2015 06:21 PM|
'06+ Ford Dana 60 fronts. Southern Indiana
I have a couple of 60s w/3.73+4.10 ratios. $650 each. Call/text (812)322-9578.
|01-22-2015 10:48 AM|
39.5x13.5x17 Irok`s on Pro Comp Wheels
4, 39.50 x 13.50 x 17 Super Swamper Irok Tires and 17 x 10 Pro Comp xtreme Wheels (5 x 5.135)... 5 bolt Pattern, 5.135 stud mounting points..Tires and wheels are in great condition.. Ford bolt pattern but may fit other vehicles, (currently on a 1998 F150 with a 7" Lift). Lug nuts included.. Package deal only... Still mounted to vehicle for your inspection...No Plugs... No Dry Rot... No leaks..All hold air... Tire depths range 12/32nds - - 14/32nds...(New are 21/32nds)
|01-22-2015 08:48 AM|
35" BFG MTs, new 15" steel wheels with powdercoated rim stiffeners. no wheel weights, 8oz BB's in each tire, they drive great on the road. 3 hold air great, one has small leak - not too bad. lots of tread left. 5 on 5.5 bolt pattern.
one run on the wheels
|01-22-2015 08:02 AM|
I have for sale the stock D30/D44 front and rear axles from my 2010 Wrangler Sport. They have 3.21 gearing and were taken out at just under 50,000 miles. Front is complete rotor to rotor and rear is missing rotors and e-brake. $1200 obo
Other available items:
Rear driveshaft, $75 obo
Front and Rear springs, $75 obo
Front bumper, $50 obo
All control arms, Make offer
I'm located in southwest Indiana, can meet at a reasonable distance. Any shipping will be on buyers dime.
|01-22-2015 04:46 AM|
built ford 9" rear for ZJ
i am selling a ford big bearing 9" rear end out of my ZJ.
full width 78-79 year F150 big bearing
converted to chevy disc brakes
coil buckets and shock mounts for ZJ setup
4 link trussed and gusseted
Yukon 31 spline shafts
4.56 Yukon geared
1350 pinion with HD pinion guard
1/4" thick rear armor cover (with drain plug)
breather on top of centersection
5 on 5.5" ford bolt pattern.
1/4" link mounts (flush with axle housing)
the only bad things are:
will most likely need a new pinion seal, it leaks a little gear oil from the pinion
the ends of the housing leak gear oil a little too
complete and ready to roll
|This thread has more than 25 replies. Click here to review the whole thread.|