Who was working on that t-case project? - Pirate4x4.Com : 4x4 and Off-Road Forum

XterraGuy · 01-20-2004, 11:40 AM

I forget who, and the post was lost with the board hiccup a few weeks back, but someone had some pictures of a t-case project they were working on that appeared to be working to make a one-and-a-half t-case out of two TX10s. Wondering what's the status on that project...

Thanks,
Brent

bignissan · 01-21-2004, 09:25 PM

fivetenben...not sure on the status...

fivetenben · 01-22-2004, 07:24 PM

yep thats me. Status hasnt changed much. Im waiting for a CNC hookup to pan out. I am thinking about ditching the project to pursue a different idea. It would adapt a dana 300 behind the nissan low-range. I have the dimensions I need from the nissan case. Im trying to get the d300 pattern without having to drop $300 for a tcase I may not use. Overall its a very slow process, hopefully one or the other pans out.

Ben

onlyonedr · 01-24-2004, 07:14 PM

Here's a little bit of motivation for you fivetenben:

http://www.marks4wd.com/Nissan-gq-gu-dual-tc.htm

It fits the Patrol TX-12 t-case, defintely won't work on US spec TX-10As due to big problems (case is mirrored from ours).

Definitely they type of thing we need though. Keep us posted.

fivetenben · 01-25-2004, 04:21 PM

thanks for the link. you can see the family resemblence to the TX10.

Ben

01-20-2004, 11:40 AM	#1 (permalink)
XterraGuy Registered User Join Date: Apr 2002 Member # 11064 Location: Columbia, MD Posts: 257	Who was working on that t-case project? I forget who, and the post was lost with the board hiccup a few weeks back, but someone had some pictures of a t-case project they were working on that appeared to be working to make a one-and-a-half t-case out of two TX10s. Wondering what's the status on that project... Thanks, Brent

01-21-2004, 09:25 PM	#2 (permalink)
bignissan Registered User Join Date: Oct 2002 Member # 14644 Location: Magnolia, Texas Posts: 2,019	fivetenben...not sure on the status... __________________ 1986.5 Nissan crawler - dual cases, one tons, 42's... 2003 SV650 1997 F350 DRW PSD

01-22-2004, 07:24 PM	#3 (permalink)
fivetenben Registered User Join Date: Sep 2000 Member # 1710 Location: paradise, ca Posts: 473	yep thats me. Status hasnt changed much. Im waiting for a CNC hookup to pan out. I am thinking about ditching the project to pursue a different idea. It would adapt a dana 300 behind the nissan low-range. I have the dimensions I need from the nissan case. Im trying to get the d300 pattern without having to drop $300 for a tcase I may not use. Overall its a very slow process, hopefully one or the other pans out. Ben Last edited by fivetenben; 01-22-2004 at 07:26 PM.

01-24-2004, 07:14 PM	#4 (permalink)
onlyonedr Registered User Join Date: May 2003 Member # 19543 Posts: 223	Here's a little bit of motivation for you fivetenben: http://www.marks4wd.com/Nissan-gq-gu-dual-tc.htm It fits the Patrol TX-12 t-case, defintely won't work on US spec TX-10As due to big problems (case is mirrored from ours). Definitely they type of thing we need though. Keep us posted. __________________ '01 Nissan KC Desert Runner: Work in Progress '69 Chevy K5: Non-Wheeling Fun Rig

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-25-2004, 04:21 PM	#5 (permalink)
fivetenben Registered User Join Date: Sep 2000 Member # 1710 Location: paradise, ca Posts: 473	thanks for the link. you can see the family resemblence to the TX10. Ben