CALMINI Xterra?Frontier SAS Kit - Pirate4x4.Com : 4x4 and Off-Road Forum

CALMINI Products Inc · 01-02-2005, 04:13 PM

Here's a link to the first photo we've taken of the new kit- Part # NP12700 Front end kit only. Price-$1795.00 (steel braided front brake lines are included but not shown here)

http://www.purenissan.com/NP12700.jpg

Options to this kit will be: 1) Front Coil-Over Shocks,(Fox,SAW,Bilstein,King) 2) Optional Front Sway Bar, 3) Rear Leaf Spring pack for both Xterra & Frontier, 4) Front CV Driveline.

Not included in the kit is the donor axle. The axle used in this kit is a D44 from a 1980-1985 Jeep Waggoneer w/drivers side drop diff and no vacuum disconnect. I know of nothing else that will work.

If you have questions, please call.

wes8517 · 01-02-2005, 04:23 PM

wouldnt an early bronco axle work as well?

wes

Plush_Darkside · 01-03-2005, 06:00 AM

Any word on the D21 kit?

CALMINI Products Inc · 01-03-2005, 07:22 AM

Quote:

Originally Posted by wes8517

wouldnt an early bronco axle work as well?

wes

I believe it's roughly the same width. D30 or 44? Either way though, you'll have to cut the C bushing mounts off .

CALMINI Products Inc · 01-03-2005, 07:24 AM

Quote:

Originally Posted by Plush_Darkside

Any word on the D21 kit?

It's coming, need to release them one at a time...

System-f · 01-03-2005, 12:32 PM

no chance in hell they make anything like this for my truck, but damnit I hope it sells good..

big97redtj · 01-17-2005, 10:43 AM

Quote:

I know of nothing else that will work.

Unless you have us build you some housings for those swaps

Looks good Steve!

Larry

(Oops, logged in as Matt on puter)

01-02-2005, 04:13 PM	#1 (permalink)
CALMINI Products Inc Registered User Join Date: Mar 2003 Member # 17772 Location: Bakersfield,Ca Posts: 20	CALMINI Xterra/Frontier SAS Kit Here's a link to the first photo we've taken of the new kit- Part # NP12700 Front end kit only. Price-$1795.00 (steel braided front brake lines are included but not shown here) http://www.purenissan.com/NP12700.jpg Options to this kit will be: 1) Front Coil-Over Shocks,(Fox,SAW,Bilstein,King) 2) Optional Front Sway Bar, 3) Rear Leaf Spring pack for both Xterra & Frontier, 4) Front CV Driveline. Not included in the kit is the donor axle. The axle used in this kit is a D44 from a 1980-1985 Jeep Waggoneer w/drivers side drop diff and no vacuum disconnect. I know of nothing else that will work. If you have questions, please call. __________________ Steve Kramer CALMINI Products Inc www.calmini.com Last edited by CALMINI Products Inc; 01-02-2005 at 04:38 PM. Reason: Fix typo in title

01-02-2005, 04:23 PM	#2 (permalink)
wes8517 Rock God Join Date: Oct 2002 Member # 14196 Location: pearland/webster, tx Posts: 1,368	wouldnt an early bronco axle work as well? wes __________________ Nothing worth noting here

01-03-2005, 06:00 AM	#3 (permalink)
Plush_Darkside Registered User Join Date: Jul 2003 Member # 21434 Location: Columbus, Ohio Posts: 128	Any word on the D21 kit? __________________ [COLOR=DarkRed]'93 Pathfinder[/COLOR] '88 Pathfinder

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-03-2005, 12:32 PM	#6 (permalink)
System-f Registered User Join Date: Oct 2003 Member # 23900 Location: Texas Posts: 172	no chance in hell they make anything like this for my truck, but damnit I hope it sells good..