Gun experts....help searching - Page 2 - Pirate4x4.Com : 4x4 and Off-Road Forum

usmcdoc14 · 10-06-2005, 05:36 PM

here

Keith Strong · 10-06-2005, 05:38 PM

Thats what I said

And I think it looks good for getting about 200 rounds through it last weekend and no cleaning

usmcdoc14 · 10-06-2005, 05:40 PM

Quote:

Originally Posted by Keith Strong

Thats what I said

And I think it looks good for getting about 200 rounds through it last weekend and no cleaning

you want me to post a pic of mine to make sure

Keith Strong · 10-06-2005, 05:41 PM

A pic just for you Doc

usmcdoc14 · 10-06-2005, 05:42 PM

Quote:

Originally Posted by Keith Strong

A pic just for you Doc

yease

now put it together and feel the trigger pull

Keith Strong · 10-06-2005, 05:45 PM

Wow...huge difference! Thanks man....I owe you one for that. Cant wait to go shooting again now. And on last cause I am "that picture guy"

Lazarus401 · 10-06-2005, 07:31 PM

I am going to have to do this to my 40V. I like the gun except for the trigger pull.

Thanks

Lazarus401 · 10-06-2005, 07:40 PM

Here are hi-cap mags for these. Dang there $40 a piece still.

http://www.e-gunparts.com/DisplayAd....rSuperSKU=&MC=

at least this page gives us the part numbers.

SW9V- 16 rds - part# 929720 - $39.95

SW40V - 14 rds - part# 929740 - $39.95

Keith Strong · 10-06-2005, 08:08 PM

Quote:

Originally Posted by Lazarus401

Here are hi-cap mags for these. Dang there $40 a piece still.

http://www.e-gunparts.com/DisplayAd....rSuperSKU=&MC=

at least this page gives us the part numbers.

SW9V- 16 rds - part# 929720 - $39.95

SW40V - 14 rds - part# 929740 - $39.95

They wont ship to me

usmcdoc14 · 10-06-2005, 08:18 PM

Quote:

Originally Posted by Keith Strong

They wont ship to me

get the hi-cap springs from brownells or midway, have someone TIG the cut seams on the middle of the mag body, cut out the dimples and put back together

usmcdoc14 · 10-06-2005, 08:22 PM

I just polished the sear and firing pin catch surfaces with some white rouge and the Dremel tool. I also polished the firing pin block (the circle thing on the inside of the slide) and the lever that sticks up from the receiver to engage it. Just polish till its nice and shiny and then stop (no need to take too much off)

HOLY FUCK is this bitch smooth and crisp

oh and my recoil spring guide just came apart

time for a steel one

mwoodruff · 10-06-2005, 09:05 PM

One of the best places to buy mags is a place called CDNN Investments. Search them on the internet. Their prices are the best I've found.

usmcdoc14 · 10-07-2005, 04:24 AM

Quote:

Originally Posted by mwoodruff

One of the best places to buy mags is a place called CDNN Investments. Search them on the internet. Their prices are the best I've found.

yes but they dont ship to Commiefornia and a few other select assinine states

usmcdoc14 · 10-07-2005, 06:40 AM

Quote:

Originally Posted by Keith Strong

I am headed to Reno, NV this weekend for some boozin and gamblin

Planning to see what I can find while I am there.

if you find 17 round sigma 9mm mags let me know

1RUSTYRIG · 10-07-2005, 06:47 AM

Quote:

Originally Posted by mwoodruff

One of the best places to buy mags is a place called CDNN Investments. Search them on the internet. Their prices are the best I've found.

And they only sell the 10 rd for the sigmas

TNToy · 09-29-2007, 04:59 PM

BTT

Doc, thought you'd just like to know that your 'tip' is still helping owners of crappy pistols throughout the world. I PM'd a link to this thread to a guy on Glocktalk, and here's what he said about it afterward:

Quote:

Originally Posted by Kentak from Glocktalk

Hi

Well, it's difficult to compare the "new" trigger to a Glock's, because, it's still not a Glock, of course. I always describe the stock Glock trigger as having two stages, the "take up" which is that pretty light, quarter-inch or so initial pull. That's followed by the stiffer "let off" which, isn't "crisp" by any means, but seems to have a pretty good break.

The SW9VE's trigger pull is long and pretty consistent throughout its travel. The heavy original trigger seemed smooth to me, probably because any roughness was hidden by all that spring force. Now that it's lighter, it feels a little less smooth, but not terrible. I'm sure a little polishing in the right places would help a lot, but I didn't bother. I did give the dry internals a drop of good synthetic lube.

Have you ever shot a Glock with a NY trigger spring/3.5 connector combo? That would be pretty close to what the fixed SW feels like.

Kent

usmcdoc14 · 09-29-2007, 05:14 PM

Quote:

Originally Posted by TNToy

BTT

Doc, thought you'd just like to know that your 'tip' is still helping owners of crappy pistols throughout the world. I PM'd a link to this thread to a guy on Glocktalk, and here's what he said about it afterward:

tell him to polish the ummm.....striker release.. safe.. fireing pin block? ....shit

the little "disk" in the bottom of the slide and the corresponding lever that hits it when the slide is on the weapon
those are usually rough and people can not fuck up anything by doing it

oh and Roxy could ya move this to the outdoor forum

Max Volume · 01-31-2009, 02:55 PM

Quote:

Originally Posted by usmcdoc14

I was fucking with my 9V and learned somethin

ok remove the slide like normal, push the rear pin out above your grip.
remove the sear/group/block thingie from the back of the frame. it may take some wiggleing but comes right out in one piece.

no be carefull not to loose shit and remember where stuff goes. There is one pin and should be 2-3 springs in there (model depending) there will be a "pigtail" style spring at the bottom over the only pin .

remove the pin and throw out that spring it serves nothing but to increace the trigger pull.
now from what i have seen in the diagrams the newer Sigma's had 2 coil springs in there while mine has only one. you will need only the long skinny spring in there for it to work correctly

it will drop 4-5lbs off the trigger pull

THANK YOU DOC!!!

This was so fawking easy, everyone should do it!!!

Max Volume · 01-31-2009, 03:02 PM

Hey WTF is this thread doing in chitchat?

TexasBlake · 01-31-2009, 03:17 PM

Quote:

Originally Posted by Max Volume

Hey WTF is this thread doing in chitchat?

There probably wasn't a gun forum yet when this post was made.

Glad someone bumped it. I need to do this to my SIG. I getting tired of aiming up and to the left

suepahfly · 11-03-2009, 08:38 PM

Does this trigger fix work for the newer pistols? I'm thinking about buying one in the next few days, but since this thread is 4 years old, I figured I'd ask before I did.

rugger · 11-03-2009, 09:03 PM

Quote:

Originally Posted by suepahfly

Does this trigger fix work for the newer pistols? I'm thinking about buying one in the next few days, but since this thread is 4 years old, I figured I'd ask before I did.

Go ahead and pick one up. I'm sure that there's plenty of work that can be done to turn one into a decent gun.

stoneyxj · 11-03-2009, 10:22 PM

bummer, my pin doesnt seem to wanna come out!!!

RJR-JR · 12-05-2009, 09:26 PM

Dead thread revival...woo that mod worked wonders!

myglock30 · 01-01-2010, 01:51 PM

Man what a post. You just saved my pops from selling his 40ve. This was a gun with terrible trigger, now a nice short 5 or so pound trigger pull. Cant thank you enough, you are the man.

happy new year

P.S. This is Pops and the pull is as very similar to the Glock30. I can't believe how easy the change was, with the help of your pictures.

The factory's heavy trigger pull is the biggest complaint on every blog I've read on the 40VE and more people would love their pistol uncondionally if they knew about this amazing secret.

10-06-2005, 05:36 PM	#26 (permalink)
usmcdoc14 Fistful of Boomstick Join Date: Aug 2002 Member # 13344 Location: Norfawk, VA Posts: 12,172	here __________________ Doc-14 Tactical Products: When it absolutely, positively needs to be made from random crap found in the back of my garage. You cant ban knowledge, learn to make your own guns right Here. New York, Colorado, Maryland, Conneticut….is your state next? Yes it is. Write, Vote and Fight. Last edited by usmcdoc14; 12-06-2005 at 11:23 AM.

10-06-2005, 05:38 PM	#27 (permalink)
Keith Strong Registered User Join Date: Mar 2000 Member # 477 Location: The Peeplz Republik Posts: 12,257	Thats what I said And I think it looks good for getting about 200 rounds through it last weekend and no cleaning __________________ [CENTER][SIZE="5"][URL="http://www.strong-arms.com"]Strong Arms "Survival Slings" For Sale PM me for a PBB only price[/URL] [/SIZE][/CENTER]

10-06-2005, 05:41 PM	#29 (permalink)
Keith Strong Registered User Join Date: Mar 2000 Member # 477 Location: The Peeplz Republik Posts: 12,257	A pic just for you Doc Attached Images __________________ [CENTER][SIZE="5"][URL="http://www.strong-arms.com"]Strong Arms "Survival Slings" For Sale PM me for a PBB only price[/URL] [/SIZE][/CENTER]

10-06-2005, 05:45 PM	#31 (permalink)
Keith Strong Registered User Join Date: Mar 2000 Member # 477 Location: The Peeplz Republik Posts: 12,257	Wow...huge difference! Thanks man....I owe you one for that. Cant wait to go shooting again now. And on last cause I am "that picture guy" Attached Images __________________ [CENTER][SIZE="5"][URL="http://www.strong-arms.com"]Strong Arms "Survival Slings" For Sale PM me for a PBB only price[/URL] [/SIZE][/CENTER]

10-06-2005, 07:31 PM	#32 (permalink)
Lazarus401 Registered User Join Date: Jan 2003 Member # 16465 Location: Stansbury Park, Utah Posts: 132	I am going to have to do this to my 40V. I like the gun except for the trigger pull. Thanks __________________ Dave L (Lazarus401)

10-06-2005, 07:40 PM	#33 (permalink)
Lazarus401 Registered User Join Date: Jan 2003 Member # 16465 Location: Stansbury Park, Utah Posts: 132	Here are hi-cap mags for these. Dang there $40 a piece still. http://www.e-gunparts.com/DisplayAd....rSuperSKU=&MC= at least this page gives us the part numbers. SW9V- 16 rds - part# 929720 - $39.95 SW40V - 14 rds - part# 929740 - $39.95 __________________ Dave L (Lazarus401)

10-06-2005, 08:22 PM	#36 (permalink)
usmcdoc14 Fistful of Boomstick Join Date: Aug 2002 Member # 13344 Location: Norfawk, VA Posts: 12,172	I just polished the sear and firing pin catch surfaces with some white rouge and the Dremel tool. I also polished the firing pin block (the circle thing on the inside of the slide) and the lever that sticks up from the receiver to engage it. Just polish till its nice and shiny and then stop (no need to take too much off) HOLY FUCK is this bitch smooth and crisp oh and my recoil spring guide just came apart time for a steel one __________________ Doc-14 Tactical Products: When it absolutely, positively needs to be made from random crap found in the back of my garage. You cant ban knowledge, learn to make your own guns right Here. New York, Colorado, Maryland, Conneticut….is your state next? Yes it is. Write, Vote and Fight. Last edited by usmcdoc14; 10-06-2005 at 08:23 PM.

10-06-2005, 09:05 PM	#37 (permalink)
mwoodruff Registered User Join Date: Mar 2000 Member # 461 Location: fort worth, tx Posts: 554	One of the best places to buy mags is a place called CDNN Investments. Search them on the internet. Their prices are the best I've found. __________________ "A fear of weapons is a sign of retarded sexual and emotional maturity." ("General Introduction to Psychoanalysis," S. Freud)

01-31-2009, 03:02 PM	#44 (permalink)
Max Volume Registered User Join Date: Apr 2003 Member # 19077 Location: Socal Posts: 2,236	Hey WTF is this thread doing in chitchat?

11-03-2009, 08:38 PM	#46 (permalink)
suepahfly Wheeler Join Date: Jan 2006 Member # 64712 Location: Honor, MI Posts: 273	Does this trigger fix work for the newer pistols? I'm thinking about buying one in the next few days, but since this thread is 4 years old, I figured I'd ask before I did. __________________ 87 suzuki samurai, 3" suspension lift, 32x11.5 mud rovers on white steelies Soon to have yota axles with 5.29 gears, propane, and some 36" iroks

11-03-2009, 10:22 PM	#48 (permalink)
stoneyxj Registered User Join Date: May 2001 Member # 4565 Location: Citrus Heights, CA Posts: 1,434	bummer, my pin doesnt seem to wanna come out!!! __________________ [URL="http://www.pirate4x4.com/forum/showthread.php?p=9122701#post9122701"]http://www.pirate4x4.com/forum/showthread.php?p=9122701#post9122701[/URL] [URL="http://www.facebook.com/#!/KentMatchell"]http://www.facebook.com/#!/KentMatchell[/URL] [URL="https://plus.google.com/u/0/108697912144062186544/posts"]https://plus.google.com/u/0/108697912144062186544/posts[/URL]

12-05-2009, 09:26 PM	#49 (permalink)
RJR-JR Registered User Join Date: Dec 2006 Member # 83963 Location: Tualatin, Oregon Posts: 91	Dead thread revival...woo that mod worked wonders! __________________ [url]www.rjroffroad.com[/url]

01-01-2010, 01:51 PM	#50 (permalink)
myglock30 Registered User Join Date: Jan 2010 Member # 149639 Posts: 1	fix for sigma 40ve Man what a post. You just saved my pops from selling his 40ve. This was a gun with terrible trigger, now a nice short 5 or so pound trigger pull. Cant thank you enough, you are the man. happy new year P.S. This is Pops and the pull is as very similar to the Glock30. I can't believe how easy the change was, with the help of your pictures. The factory's heavy trigger pull is the biggest complaint on every blog I've read on the 40VE and more people would love their pistol uncondionally if they knew about this amazing secret.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode