S&W SW9V Finished: or polishing the turd - Pirate4x4.Com : 4x4 and Off-Road Forum

usmcdoc14 · 01-11-2006, 07:59 PM

I started with your typical hated Smith and Wesson Sigma series 9mm pistol shown in its "toy gun" grey finish

first I fixed the trigger pull problem associated with sigmas here and dyed the frame a different color
as shown here

and fabricated a picatinny rail out of an old AR rail.

Well I finished the bitch

I was going to Gun-kote or Dura-coat the slide but seeing as i went the cheap bastard rout from the beginning i might as well finish the "theme"

Its sprayed with Rustoleum Textured in black and then baked in the oven at 350* for an hour. (same finish as my AK's) It is VERY tough and easily touched up.
That and its like $3 a can

I also went the cheap bastard rout with the light.

it is a LedWave Z-5. and cost me $50 shipped from ebay. Now before you laugh it has a momentary and ON switch that is ergonomic, it uses 2 lithium cells and believe it or not uses the EXACT SAME FAWKING BULB as my surefire

You could put a higher watt Surefire bulb in this bitch if you wished.
I find it quite blinding as is.

questions, comments, concerns ??

far...right · 01-11-2006, 08:03 PM

so how does it shoot?

4runner · 01-11-2006, 08:04 PM

um, how does it SHOOT?

ForestCam · 01-11-2006, 08:07 PM

Quote:

Originally Posted by 4runner

um, how does it SHOOT?

You pull the trigger and the bullets come out the little hole in the other end.

usmcdoc14 · 01-11-2006, 08:07 PM

Quote:

Originally Posted by far...right

so how does it shoot?

i have not shot in since i painted it

It JUST got put together 10 min ago.

but it is one of the most accurate 9mm pistols I have ever shot. with the trigger mods I did it shoots like a dream and i have had 0 problems.

basketcasejeep · 01-11-2006, 08:37 PM

Well dangit, nows a good time to take it out in the backyard and test the light AND the accuracy.

usmcdoc14 · 01-11-2006, 08:39 PM

Quote:

Originally Posted by basketcasejeep

Well dangit, nows a good time to take it out in the backyard and test the light AND the accuracy.

cause the HOA will loooooooove that

RedNeckRea · 01-11-2006, 08:41 PM

since when have you worried about the HOA

basketcasejeep · 01-11-2006, 08:44 PM

Quote:

Originally Posted by usmcdoc14

cause the HOA will loooooooove that

EXACTLY.

I'm looking for land in the country right now, with no restrictions, and no HOA....

lesevenel · 01-11-2006, 10:47 PM

should i feel weird for being the only one to point out the ass...?

mudslinger99 · 01-11-2006, 10:56 PM

Quote:

Originally Posted by lesevenel

should i feel weird for being the only one to point out the ass...?

No, you should feel disappointed that you didn't see that pic the 1st time he posted it in the other thread

flecker · 01-11-2006, 11:04 PM

I'm typically not a plastic gun fan, but I have to admit I like that one... overall your under $350-375 for that thing??? And it prolly handles better than most Glocks I've tried.... still I think I'll stick w/ my CZ75 though.

What did you dye it with??? Rit? That and the grip tape made a huge difference!

EDIT: And that is a nice ass

CJ5inFourWheelDrive · 01-11-2006, 11:16 PM

I'm guessing by the goosebumps, the spork was in Bev's presence?

Pavement Pounder83 · 01-11-2006, 11:18 PM

awesome i got my sigma last week i put 100 rounds thru it it felt nice. it is the first auto i have ever shot so i dont have much to compare it too. i am goin to try the trigger mod after i shoot it some more.

Drew

flecker · 01-11-2006, 11:18 PM

Quote:

Originally Posted by CJ5inFourWheelDrive

I'm guessing by the goosebumps, the spork was in Bev's presence?

Prolly the cold metal

CJ5inFourWheelDrive · 01-11-2006, 11:33 PM

Ahhhh Doc must have been handling the spork earlier and some of the residual power transfered over to the Sigma causing the goosebumps and later orgasmic convulsions.

tacoma73 · 01-12-2006, 12:36 AM

well... I say it's a polished turd, but it's a nice polished turd. And if it shoots ok, even better..

off to ebay to look for a cheap light like that.

90WAG · 01-12-2006, 04:49 AM

Doc, nice pistol. You really did a good job with it.

Bev, nice pooper!

BUZZISCRAZY2 · 01-12-2006, 05:25 AM

Goosebumps are Cool

..............Good job wif da piece too.

usmcdoc14 · 01-12-2006, 05:32 AM

Quote:

Originally Posted by flecker

I'm typically not a plastic gun fan, but I have to admit I like that one... overall your under $350-375 for that thing??? And it prolly handles better than most Glocks I've tried.... still I think I'll stick w/ my CZ75 though.

What did you dye it with??? Rit? That and the grip tape made a huge difference!

EDIT: And that is a nice ass

yup Rit dye. follow the instructions in the other thread or the way you Dye R/C car parts.

I ruv da grip tape on weapons

preach · 01-12-2006, 06:12 AM

Need more pics of the display table.

usmcdoc14 · 01-12-2006, 06:29 AM

Quote:

Originally Posted by preach

Need more pics of the display table.

the Carhart jacket or Bev's ass ?

jht3 · 01-12-2006, 07:26 AM

wow, i looked at all the pics but couldn't figure out why people kept saying "nice ass". i looked at looked and figured the pbb was fucked up again....then i saw it

BRAVO

usmcdoc14 · 01-12-2006, 09:27 AM

Quote:

Originally Posted by jht3

wow, i looked at all the pics but couldn't figure out why people kept saying "nice ass". i looked at looked and figured the pbb was fucked up again....then i saw it

BRAVO

your kidding right ?

Bev's ass has been used to showcase a plethora of my items as it usually makes my shoddy craftsmanship harder to notice

yimmy · 01-12-2006, 09:42 AM

I didn't see it at first either.

01-11-2006, 07:59 PM	#1 (permalink)
usmcdoc14 Fistful of Boomstick Join Date: Aug 2002 Member # 13344 Location: Norfawk, VA Posts: 12,166	S&W SW9V Finished: or polishing the turd I started with your typical hated Smith and Wesson Sigma series 9mm pistol shown in its "toy gun" grey finish first I fixed the trigger pull problem associated with sigmas here and dyed the frame a different color as shown here and fabricated a picatinny rail out of an old AR rail. Well I finished the bitch I was going to Gun-kote or Dura-coat the slide but seeing as i went the cheap bastard rout from the beginning i might as well finish the "theme" Its sprayed with Rustoleum Textured in black and then baked in the oven at 350* for an hour. (same finish as my AK's) It is VERY tough and easily touched up. That and its like $3 a can I also went the cheap bastard rout with the light. it is a LedWave Z-5. and cost me $50 shipped from ebay. Now before you laugh it has a momentary and ON switch that is ergonomic, it uses 2 lithium cells and believe it or not uses the EXACT SAME FAWKING BULB as my surefire You could put a higher watt Surefire bulb in this bitch if you wished. I find it quite blinding as is. questions, comments, concerns ?? Attached Images __________________ Doc-14 Tactical Products: When it absolutely, positively needs to be made from random crap found in the back of my garage. You cant ban knowledge, learn to make your own guns right Here. New York, Colorado, Maryland, Conneticut….is your state next? Yes it is. Write, Vote and Fight.

01-11-2006, 08:04 PM	#3 (permalink)
4runner please fix my runner Join Date: May 2000 Member # 946 Location: WTF TX USA Posts: 6,561	um, how does it SHOOT? __________________ 4.3runner ---A golf course is a pointless exploitation of a perfectly good rifle range--- buy my ultra rare Omega III presentation rifle special price $42500.00

01-11-2006, 08:37 PM	#6 (permalink)
basketcasejeep Registered User Join Date: Aug 2004 Member # 34936 Location: GA Posts: 442	Well dangit, nows a good time to take it out in the backyard and test the light AND the accuracy. __________________ . . . but in the Kalahari it is always Tuesday, or Thursday, or whatever day you like . . .

01-11-2006, 08:41 PM	#8 (permalink)
RedNeckRea Registered User Join Date: Jan 2003 Member # 16333 Location: simi valley, ca Posts: 2,411	since when have you worried about the HOA __________________ ~Chris, retired US Navy Sailor

01-11-2006, 11:04 PM	#12 (permalink)
flecker Angry Gecko Join Date: Oct 2003 Member # 23744 Location: White Mtns., Arizona... it's on the map, just not on any map! Posts: 2,563	I'm typically not a plastic gun fan, but I have to admit I like that one... overall your under $350-375 for that thing??? And it prolly handles better than most Glocks I've tried.... still I think I'll stick w/ my CZ75 though. What did you dye it with??? Rit? That and the grip tape made a huge difference! EDIT: And that is a nice ass __________________ I R A REVOLUTION LEADER! Last edited by flecker; 01-11-2006 at 11:04 PM.

01-11-2006, 08:03 PM	#2 (permalink)
far...right Follow Chairman Meow Join Date: Sep 2004 Member # 35600 Location: Arkansas Posts: 1,382 Blog Entries: 5	so how does it shoot?

01-11-2006, 10:47 PM	#10 (permalink)
lesevenel Registered User Join Date: Feb 2003 Member # 17243 Location: No-Cal Posts: 119	should i feel weird for being the only one to point out the ass...?

01-11-2006, 11:16 PM	#13 (permalink)
CJ5inFourWheelDrive Registered User Join Date: May 2003 Member # 19668 Location: Central, PA Posts: 906	I'm guessing by the goosebumps, the spork was in Bev's presence? __________________ (1975 Jeep CJ-5) Being built: 2x4 A-500C frame, C&C 14 bolt w/discs & Detroit, D44 mini-spool, Flat Tops, Mad Mac Double Arms, 4.56's, SM420, D300, AA & Novak adapters, SOA on 2in. BDS YJ springs with a reversal, extended wb; 6in. front, 3in. rear, TJ flairs, hummer rims, hydroboost w/68' Vette M/C…

01-11-2006, 11:18 PM	#14 (permalink)
Pavement Pounder83 Registered User Join Date: Jan 2001 Member # 2892 Location: Sparks, NV Posts: 2,407	awesome i got my sigma last week i put 100 rounds thru it it felt nice. it is the first auto i have ever shot so i dont have much to compare it too. i am goin to try the trigger mod after i shoot it some more. Drew __________________ Drew Reynolds [SIZE="4"][COLOR="Red"]ECV 7-11[/COLOR][/SIZE] 1991 Toyota Ex Cab All Stock 1993 Xr650L [COLOR="Red"][URL="http://www.startprepared.com/forums/"]http://www.startprepared.com/forums/[/URL][/COLOR] Isautia[88:54] Delta World, Town: PBB Broski

01-11-2006, 11:33 PM	#16 (permalink)
CJ5inFourWheelDrive Registered User Join Date: May 2003 Member # 19668 Location: Central, PA Posts: 906	Ahhhh Doc must have been handling the spork earlier and some of the residual power transfered over to the Sigma causing the goosebumps and later orgasmic convulsions. __________________ (1975 Jeep CJ-5) Being built: 2x4 A-500C frame, C&C 14 bolt w/discs & Detroit, D44 mini-spool, Flat Tops, Mad Mac Double Arms, 4.56's, SM420, D300, AA & Novak adapters, SOA on 2in. BDS YJ springs with a reversal, extended wb; 6in. front, 3in. rear, TJ flairs, hummer rims, hydroboost w/68' Vette M/C… Last edited by CJ5inFourWheelDrive; 01-11-2006 at 11:36 PM.

01-12-2006, 12:36 AM	#17 (permalink)
tacoma73 be cool, baby Join Date: Mar 2003 Member # 17896 Location: tooele UT Posts: 3,048	well... I say it's a polished turd, but it's a nice polished turd. And if it shoots ok, even better.. off to ebay to look for a cheap light like that.

01-12-2006, 04:49 AM	#18 (permalink)
90WAG Registered User Join Date: Feb 2002 Member # 10206 Location: Vine Grove, KY Posts: 163	Doc, nice pistol. You really did a good job with it. Bev, nice pooper!

01-12-2006, 05:25 AM	#19 (permalink)
BUZZISCRAZY2 Registered User Join Date: Feb 2003 Member # 17399 Location: oxford wi Posts: 1,530	Goosebumps are Cool ..............Good job wif da piece too. __________________ [FONT="Comic Sans MS"]Catch your Dreams, before they slip away........[/FONT] [FONT="Arial Black"]Current vehicles[/FONT] 67 Bronco 69 Bronco 81 Bronco 81 Bronco 75 F-250 (highboy) 77 F150 78 F150 70 F100 (2wd) 93 F350 95 F350 (Blown Crazy") 95 F350 ("Crazy Too") 87 Ranger (2wd) 00 Excursion 04 Navigator

01-12-2006, 06:12 AM	#21 (permalink)
preach Registered User Join Date: Dec 2001 Member # 8713 Location: Live Free or Die Posts: 1,065	Need more pics of the display table. __________________ FiWi

01-12-2006, 07:26 AM	#23 (permalink)
jht3 Wheeler Join Date: Nov 2000 Member # 2163 Location: Alexandria, VA Posts: 348	wow, i looked at all the pics but couldn't figure out why people kept saying "nice ass". i looked at looked and figured the pbb was fucked up again....then i saw it BRAVO __________________ James

01-12-2006, 09:42 AM	#25 (permalink)
yimmy Registered User Join Date: Oct 2005 Member # 54996 Location: Fenton, Mi Posts: 11	I didn't see it at first either.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode