Post your crawlers - Page 18 - Pirate4x4.Com : 4x4 and Off-Road Forum

Randyzzz · 03-20-2012, 10:11 PM

I picked up a Wraith kit a couple weeks ago. Still waiting on the electronics, beadlocks, and some other goodies to show up. Just finished the paint last night, here's the required "beer can flex" shot...

Byro · 03-20-2012, 10:25 PM

Nothing special, little Losi NC. Pretty much stock in this pic, since upgraded to a Hitec servo, Rovers and some home-brew brakeline links and hi-steer. My friends roached out Venom.

Tommy R · 03-21-2012, 05:40 AM

Some progress on my latest abomination. It's far from complete, but it's running at least. 3 link/track bar front, semi-triangulated 4 link rear, and soon will get a roll cage, body work, and paint.

Some body armor (also not complete yet)...

707offroad · 03-21-2012, 03:30 PM

mine

Hyde802 · 03-24-2012, 08:03 PM

Some pics from today

Aaaahhh spring time

mÄrK · 03-25-2012, 08:27 AM

Closest thing to a Summit scaler I could get.

mp3ranger · 03-25-2012, 01:18 PM

Here is couple of my scaler

Jeep Cherokee with custom chassis and transfer case

Pajero with full tube chassis

Axail wraith with brushless power

RC4WD Trail Finder 2 with 2 spped trans

gtxracer · 03-28-2012, 09:34 PM

Axial Wraith:

Tekin Rx8/SCX4 7.5
Neu Energy 4s 3600 cells
12/54 gearing (I think), 32 pitch
stock setup all around, needs swaybars
Airtronics MX-3 FHSS
Hitec 7955
XXX Main graphics

youtube vid, don't mind my dumbass rambling

Axial Wraith in snow - YouTube

pike2350 · 03-30-2012, 10:11 AM

I've been getting into this recently....although, much like my 1:1, I tend to like more full bodied rigs, and less of the tube/crawlers.

I built the Rodeo body from styrene to match my DD and recently acquired SAS'd Rodeo. The paint is different, but the scale is close (tires aren't true scale as with most R/C cars)

SCX10 Honcho kit
Tekin Fxr
Hitec servo (don't recall which)
35T Tekin motor
Spektrum rx/tx

I also just picked up another scx10 with a JK unlimited body. I still need to go through it and clean/grease stuff, but another truck to play with is always good.

calikingcrawler · 04-10-2012, 12:18 AM

MY:

Hummer HX
SCX10, FXR, 35t tekin, 7950 servo, cc bec

Mini
Mini pro, Mamba micro pro, 16t brood anarchy, 645 servo

XR10
hellstrom chassis, FXR, punk dig, dual 35t tekins, 7950 servo, cc bec

1/6 Willys project
SCX10, no electronics

Honcho
SCX10, fxr, 35t integy, 645 servo

Axial SSS hybrid
fxr, 55t novak, 7950 servo

OG SCX10
traxxas xl5, 35t integy, 645 servo

and some others
brushless slash blah blah blah

rcp916 · 04-12-2012, 06:20 PM

I should have just bought a RTR! I bought an Axial xr 10 moa like about 2 years ago and I enjoyed putting it together and put tires on it but I have yet to buy electronics for it cause I'm a newb and was blown away on how expensive it was going to be to actually get it running!!!

Then to top it off they came out with the Wraith RTR thats cheaper than my kit was! Rc looks way fun but Im already poor.

turbocivic90 · 04-12-2012, 08:38 PM

built the kit
made rtr
rooster crawler esc,novak 45t motor,winch,rc4wd 2.2 rockstompers,aluminum hubs, aluminum links,losi shocks,etc... pretty fun rig.

vsh150 · 04-16-2012, 08:16 AM

My R1 , mostly Stock , 55T motor , Novak ESC , for now

ChiefsJ10 · 04-17-2012, 09:32 AM

Pro-Line JK hood & grill, custom body panels, custom chassis out of 3/16" solid rod.
Integy 55t, Sidewinder V1
Wraith axles and skid, home-brew links
Savox SG-0252 servo, STRC steering linkages
Integy shocks rear, axial shock front, full-droop
14" WB, 2 1/4" clearance at the skid
Axial 2.2 BL's with RC4WD 2.2 Iroks

Spiesxj · 04-17-2012, 03:53 PM

Quote:

Originally Posted by kdrproductions

jq buggy:

jmc zuk:

any specs on either of these?

calikingcrawler · 04-17-2012, 06:14 PM

Quote:

Originally Posted by rcp916

I should have just bought a RTR! I bought an Axial xr 10 moa like about 2 years ago and I enjoyed putting it together and put tires on it but I have yet to buy electronics for it cause I'm a newb and was blown away on how expensive it was going to be to actually get it running!!!

Then to top it off they came out with the Wraith RTR thats cheaper than my kit was! Rc looks way fun but Im already poor.

I picked up a kit XR that was already put together on the cheap thinking i could build a somewhat reasonable comp rig. $1200 later

Now I dont comp it and wish I had spent that $1200 on 2 scalers.

ChiefsJ10 · 04-17-2012, 06:21 PM

Here's my '34 Ford.
SCX-10 chassis rails cut down with custom tube work.
SCX-10 axles with 4WS, 4-link F/R
Traxxas 21T, Tekin FXR ESC, Castle BEC
Axial BL's with 2.2 TSL's
14" WB, 3 1/4" at the belly.

mp3ranger · 04-18-2012, 04:07 AM

crwln93 · 04-22-2012, 07:07 PM

The more I drive this Wraith, the more fun it is!

salmonfacesalad · 04-30-2012, 03:22 PM

salmonfacesalad · 04-30-2012, 03:26 PM

tjjared413 · 05-01-2012, 02:49 PM

Quote:

Originally Posted by salmonfacesalad

nice work man.. i want a TJ body for my Wraith...

frikenwoodro · 05-04-2012, 12:51 PM

Shipping on the green tuber(fatgirl?) to 87109 lol

Bigpook · 05-05-2012, 01:37 PM

SheetMetalSlug · 05-15-2012, 09:36 PM

ive had a few...

old maxstone

new to me scx10

03-20-2012, 10:11 PM	#426 (permalink)
Randyzzz Registered User Join Date: Mar 2008 Member # 109727 Location: Sisters, OR Posts: 165	My Wraith kit... I picked up a Wraith kit a couple weeks ago. Still waiting on the electronics, beadlocks, and some other goodies to show up. Just finished the paint last night, here's the required "beer can flex" shot... __________________ Randy S. It's not what you buy, it's what you build. 82 Scrambler 88 Grand Wagoneer 73 VW Bus Last edited by Randyzzz; 03-20-2012 at 10:11 PM.

03-21-2012, 05:40 AM	#428 (permalink)
Tommy R Wheeler Join Date: May 2006 Member # 72851 Location: Austin, TX, USA Posts: 172	Some progress on my latest abomination. It's far from complete, but it's running at least. 3 link/track bar front, semi-triangulated 4 link rear, and soon will get a roll cage, body work, and paint. Some body armor (also not complete yet)... __________________ 2001 Jeep Wrangler - not quite "hard core" junk 2001 Dodge 2500 - tows the junk

03-24-2012, 08:03 PM	#430 (permalink)
Hyde802 I Lovermont Join Date: Jan 2011 Member # 181835 Location: Berlin, VT Posts: 344	Some pics from today Aaaahhh spring time __________________ 92 Toyota Xtracab 3vze, spooled, bobbed, beat on 35s Were all mad here

03-28-2012, 09:34 PM	#433 (permalink)
gtxracer spot me? mydfghgfff! Join Date: Dec 2003 Member # 25303 Location: in the shop Posts: 3,756	Axial Wraith: Tekin Rx8/SCX4 7.5 Neu Energy 4s 3600 cells 12/54 gearing (I think), 32 pitch stock setup all around, needs swaybars Airtronics MX-3 FHSS Hitec 7955 XXX Main graphics youtube vid, don't mind my dumbass rambling Axial Wraith in snow - YouTube __________________ 97 TJ 4.0/np435/d300/3link/4link in progress Ultimate Wrangler Build Ups and Swaps Thread Builds, Swaps, Axles, Engines, Turbos, Diesels, Suspensions, Fab, and more! Now incorporating a CJ and Willys section, post your tech and builds!

03-30-2012, 10:11 AM	#434 (permalink)
pike2350 Registered User Join Date: Oct 2003 Member # 23507 Location: SLC, UT Posts: 161	I've been getting into this recently....although, much like my 1:1, I tend to like more full bodied rigs, and less of the tube/crawlers. I built the Rodeo body from styrene to match my DD and recently acquired SAS'd Rodeo. The paint is different, but the scale is close (tires aren't true scale as with most R/C cars) SCX10 Honcho kit Tekin Fxr Hitec servo (don't recall which) 35T Tekin motor Spektrum rx/tx I also just picked up another scx10 with a JK unlimited body. I still need to go through it and clean/grease stuff, but another truck to play with is always good. __________________ Pike2350 aka "Jonesy" on other boards

03-20-2012, 10:25 PM	#427 (permalink)
Byro Registered User Join Date: Mar 2012 Member # 214685 Location: Akron-Canton, OH Posts: 123	Nothing special, little Losi NC. Pretty much stock in this pic, since upgraded to a Hitec servo, Rovers and some home-brew brakeline links and hi-steer. My friends roached out Venom.

03-25-2012, 08:27 AM	#431 (permalink)
mÄrK Registered User Join Date: Mar 2000 Member # 506 Location: Peoples republic of Nine Mile Posts: 1,230	Closest thing to a Summit scaler I could get.

03-25-2012, 01:18 PM	#432 (permalink)
mp3ranger Registered User Join Date: Apr 2010 Member # 158952 Posts: 11	Here is couple of my scaler Jeep Cherokee with custom chassis and transfer case Pajero with full tube chassis Axail wraith with brushless power RC4WD Trail Finder 2 with 2 spped trans

04-10-2012, 12:18 AM	#435 (permalink)
calikingcrawler Registered User Join Date: Jan 2009 Member # 127790 Location: Bakersfield, California Posts: 53	MY: Hummer HX SCX10, FXR, 35t tekin, 7950 servo, cc bec Mini Mini pro, Mamba micro pro, 16t brood anarchy, 645 servo XR10 hellstrom chassis, FXR, punk dig, dual 35t tekins, 7950 servo, cc bec 1/6 Willys project SCX10, no electronics Honcho SCX10, fxr, 35t integy, 645 servo Axial SSS hybrid fxr, 55t novak, 7950 servo OG SCX10 traxxas xl5, 35t integy, 645 servo and some others brushless slash blah blah blah Last edited by calikingcrawler; 04-17-2012 at 07:49 PM.

04-12-2012, 06:20 PM	#436 (permalink)
rcp916 TheMOTHERFUKINHIPS! Join Date: Oct 2010 Member # 171538 Location: Planet Earth Posts: 273	I should have just bought a RTR! I bought an Axial xr 10 moa like about 2 years ago and I enjoyed putting it together and put tires on it but I have yet to buy electronics for it cause I'm a newb and was blown away on how expensive it was going to be to actually get it running!!! Then to top it off they came out with the Wraith RTR thats cheaper than my kit was! Rc looks way fun but Im already poor.

04-12-2012, 08:38 PM	#437 (permalink)
turbocivic90 Registered User Join Date: Apr 2012 Member # 216443 Posts: 2	tamiya cr-01 unimog built the kit made rtr rooster crawler esc,novak 45t motor,winch,rc4wd 2.2 rockstompers,aluminum hubs, aluminum links,losi shocks,etc... pretty fun rig.

04-16-2012, 08:16 AM	#438 (permalink)
vsh150 Registered User Join Date: Oct 2005 Member # 55168 Location: Chile, South America Posts: 53	My R1 , mostly Stock , 55T motor , Novak ESC , for now __________________ FJ40 5.8L EFI,C6,CCG underdrive,custom FF rear axle, 61" WMS, SR front,38.5" SXs,spool , soa

04-17-2012, 09:32 AM	#439 (permalink)
ChiefsJ10 Registered User Join Date: Nov 2010 Member # 173502 Location: Cookeville, Tn Posts: 10	JK Buggy Pro-Line JK hood & grill, custom body panels, custom chassis out of 3/16" solid rod. Integy 55t, Sidewinder V1 Wraith axles and skid, home-brew links Savox SG-0252 servo, STRC steering linkages Integy shocks rear, axial shock front, full-droop 14" WB, 2 1/4" clearance at the skid Axial 2.2 BL's with RC4WD 2.2 Iroks __________________ '78 J10, 258/3sp/D20, D44's 5.13s welded F/R, SOA, 113" WB running grooved 35x12.5 KM2's

04-17-2012, 06:21 PM	#442 (permalink)
ChiefsJ10 Registered User Join Date: Nov 2010 Member # 173502 Location: Cookeville, Tn Posts: 10	'34 Ford Here's my '34 Ford. SCX-10 chassis rails cut down with custom tube work. SCX-10 axles with 4WS, 4-link F/R Traxxas 21T, Tekin FXR ESC, Castle BEC Axial BL's with 2.2 TSL's 14" WB, 3 1/4" at the belly. __________________ '78 J10, 258/3sp/D20, D44's 5.13s welded F/R, SOA, 113" WB running grooved 35x12.5 KM2's

04-18-2012, 04:07 AM	#443 (permalink)
mp3ranger Registered User Join Date: Apr 2010 Member # 158952 Posts: 11

04-22-2012, 07:07 PM	#444 (permalink)
crwln93 Wheeler Join Date: Aug 2007 Member # 98363 Location: Colo. Spgs., CO Posts: 392	The more I drive this Wraith, the more fun it is! Attached Images __________________ "I swear to drunk, I'm not god"

04-30-2012, 03:22 PM	#445 (permalink)
salmonfacesalad Registered User Join Date: Nov 2008 Member # 122869 Location: Newnan, Ga Posts: 133	Last edited by salmonfacesalad; 04-30-2012 at 03:25 PM.

04-30-2012, 03:26 PM	#446 (permalink)
salmonfacesalad Registered User Join Date: Nov 2008 Member # 122869 Location: Newnan, Ga Posts: 133

05-04-2012, 12:51 PM	#448 (permalink)
frikenwoodro Registered User Join Date: Nov 2008 Member # 123514 Location: Middle of hell USA Posts: 1,076	Shipping on the green tuber(fatgirl?) to 87109 lol __________________ I don't build it pretty I build it to function. Last edited by frikenwoodro; 05-04-2012 at 12:51 PM.

05-05-2012, 01:37 PM	#449 (permalink)
Bigpook Newbie Join Date: Dec 2011 Member # 207315 Posts: 11

05-15-2012, 09:36 PM	#450 (permalink)
SheetMetalSlug Registered User Join Date: Mar 2009 Member # 132938 Posts: 164	ive had a few... old maxstone new to me scx10 Last edited by SheetMetalSlug; 05-15-2012 at 09:38 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode