AX10 with MIP front axels. - Pirate4x4.Com : 4x4 and Off-Road Forum

HeyBeerMan · 02-07-2009, 08:49 PM

Just getting this used rig running. It has MIP axels and driveshafts.

Do you run them dry, or grease/oil them?

superswamper_800 · 02-08-2009, 01:57 PM

I greased the snot out of my axles and drivelines with waterproof grease for wheelbearings(what I had lying around from the trucks) dont do much for the axles, mine ended up dring out and rusting, but packing the axles full is great if you like to hit water/mud all the time like me

Before I started doing this I would pull my axles apart after muddin and they would be packed with mud, but not anymore.

02-07-2009, 08:49 PM	#1 (permalink)
HeyBeerMan Rock God Join Date: May 2001 Member # 4830 Location: Wickenburg Posts: 2,044	AX10 with MIP front axels. Just getting this used rig running. It has MIP axels and driveshafts. Do you run them dry, or grease/oil them?

02-08-2009, 01:57 PM	#2 (permalink)
superswamper_800 Registered User Join Date: Feb 2008 Member # 107931 Location: SRM Posts: 1,099	I greased the snot out of my axles and drivelines with waterproof grease for wheelbearings(what I had lying around from the trucks) dont do much for the axles, mine ended up dring out and rusting, but packing the axles full is great if you like to hit water/mud all the time like me Before I started doing this I would pull my axles apart after muddin and they would be packed with mud, but not anymore. __________________ Slickrock Mafia 96 Ram,318,NV4500,NP241,Rockwells,H1s/44s,dovetail,leafs out back,links up front

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode