|04-06-2009, 01:38 AM||#1 (permalink)|
Join Date: May 2007
Member # 92358
fs custom scale rig
The chassis is aluminum with leaf springs and shocks from rc4wd. connected to axial axles rear axle has striagth axle kit installed. the transimission is also axial with a integy 65 turn motor, using MIP steel drive shafts that will not bind, nor break. The steering servo is a water proof Traxxas High Torque (part number #2075). The Speed Control is a water proof Traxxas XL5 ESC (with deans Plug). Wheel spacers to offset the tires which are axial rims (which were sandblasted and painted gun metal black) with new Proline Hammers front tires have 6 ounces rears are 4 ounces list of parts are blow. Body is a Proline 72 Chevy long bed pick up with Pro line Scaler bumper. traxxas Tq3 for a remote. comes with traxxas reciever part #2215 Three Channels.
Here is what i have invested in this truck.
Chassis w/ susp and axles 275.00
axial beadlocks 42.00
Proline Hammers 40.00
Traxxas servo 37.99
Traxxas speed control 69.99
axle transmission 40.00
MIP Drive Shafts 49.99
integy 65 turn 19.99
Traxxas waterproof box 7.00
Proline body w/ paint 50.00
Proline scaler bumpers 33.00
Wheel Spacers 27.99
rc4wd 2.2 mudslingers 50.00
imex swamp dawgs 2.2 45.00
rc4wd steel tranny gears 35.00
rc4wd aluminum knuckles and c hubs 100.00
rc4wd super flex red springs 40.00
high steering drag link 12.00
comes with 4 4400 batteries and i believe 1 3200 and a charger.
will add pics tomorrow..
NEVER BEEN RAN OUTSIDE IN MY HOUSE ONLY
ran about 10 times for only 10 minutes each time
625 obo .. well over 1200 invested that i cant remember
Last edited by chevyguy15; 04-06-2009 at 01:42 AM.