We now carry the full line of quick fist! IN STOCK READY TO SHIP NOW

[SDHQ GOODGUY]

MINI QUICK FIST - 5/8” to 1 3/8”

MINI QUICK FIST (package of 2 clamps) holds objects from 5/8" to 1 3/8" (16 to 35mm) in diameter. Mounts easily with one screw or bolt. Great for mounting fishing rods, brooms, small flashlights and hand tools; can also be used as a pipe standoff.

QUICK FIST - 1” to 2 ¼”


[IMG]http://www.endroad.com/i//LongArmQF-Jack.jpg[IMG]

QUICK FIST (Package of 2) holds objects 1" to 2 1/4" (25mm to 57mm) in diameter. Mounts easily to keep shovels, axes, hoses and other tools or implements securely in place. Use on work vehicles, fire and police units, off road trucks, military equipment, 4x4s, ATVs, RVs, boats or on any wall.

Go-Between QUICK FIST clamp - 1 ¾” to 2 7/8”

The Go-Between QUICK FIST clamp holds tools and equipment from 1 ¾” to 2 7/8” (44 to 73mm) in diameter. This clamp will securely hold an implement up to a safe working load of 35lbs (16 kilos). The break strength is 100 lbs or 45 kilos.

Two Go-Between QUICK FIST clamps can be mounted back to back and then used to hold an item to a roll bar (for safety, keep the mount down low—certainly, not above the front seat height).

This clamp is also great for securing poles and awning struts too large for the Original QUICK FIST clamp.

3” QUICK FIST - 2.75” to 3.50”

The 3” QUICK FIST clamp holds objects from 2.75” to 3.50” (70-89mm).
Its design is very similar to the original QUICK FIST clamp, but more than 3 times larger. Extremely robust, it will securely hold a safe working load of 50lbs or 23 kilos (its break strength is 150 lbs or 68 kilos).

The 3” QUICK FIST clamp was originally design to hold fire department’s hose nozzles. But a single clamp is also excellent for securing a 3” diameter fire Extinguisher on ATVs, motorcycles and trucks.

SUPER QUICK FIST - 2 ½” to 9”


SUPER QUICK FIST holds objects 2 1/2" to 9 1/2" (64mm to 240mm) in diameter. Mounts easily. Each clamp supports a safe working of 50lbs. (23kilos). Ideal for air tanks, Fire extinguishers, scuba tanks, hose nozzles, etc. (packed one clamp per package).

Long Arm QUICK FIST clamp - ½” to 4 ½”

The Long Arm Quick Fist holds objects from ½” to 4.5” (13 to 114mm) in diameter. This clamp mounts easily with two ¼” (6mm) bolts or screws. Each clamp supports a safe working load of 50 lbs. Break strength is 150 lbs.

Long Arm Quick Fist clamps are ideal for holding high lift jacks, anything that coils (rope, wire, hose), tools, and fire extinguishers

QUICK FIST XL - 8” to 15”

The QUICK FIST XL clamps are not only our largest size, but they are also our strongest clamp. They provide a safe working load of 150lbs (68kilos), and a break-strength of 300lbs (176kilos) per clamp. Two clamp sets support up to 600lbs (273kilos).

QUICK FIST XL (Package of 2 sets of clamps) holds objects up to 15” (381mm) in diameter or about 30” (762mm) in a linear direction.

Each base of the clamp mounts with four #10 screws or bolts (not included).

QUICK FIST XL can be used to hold large bottles (acetylene, helium, propane), “Jerry” cans or other type of fuel tanks, tool boxes, floor jacks, small coolers and other equipment too large for our smaller clamps.

QUICK FIST clamps are made in the USA of heavy duty transportation grade rubber and are not affected by hot or cold climates or salt. The rubber is uv resistant.

[jokemon]

quick fist on a fire extinguisher = fail?
or are they REALLY fast at coming 'unlocked' ?

[SDHQ GOODGUY]

Yep, like unhooking a bra! Might take a little practice to get the right stroke.

We have used these and a few race vehicles, as well as custom applications, ill post a few pics of the latest project we did with these.

[jokemon]

Originally Posted by SDHQ GOODGUY

Yep, like unhooking a bra! Might take a little practice to get the right stroke.

We have used these and a few race vehicles, as well as custom applications, ill post a few pics of the latest project we did with these.

roger that, no practice needed then!
Nice design, I like how aggressive the teeth look on the straps.

[SDHQ GOODGUY]

These products are priced right to, pretty inexpensive for how versitile they are

[jsawduste]

Good stuff. Use them on the YJ and the trailer. Work great.

[SDHQ GOODGUY]

Awsome, we appreciate the support for the products and company's that allow everyone to keep having fun.

[orbot]

I use them as well, works great.

[SDHQ GOODGUY]

Thanks for the good comments on the products